Xerox Xm3 19w Users Guide

10Xerox© LCD Monitor User’s Manual
Introduction

Make sure the following items are in the box.If any items are 
missing, please return this product to the original place of 
purchase.
CAUTION:
Be sure to save original box and all packing material for future 
transport of monitor.
ACPower Cord
Package Contents
LCD Monitor 
Quick GuideWarranty CardCD-ROM(Driver/Manual)
�����������
������������������������������
D-SUB Cable
�����������
������������������������������
AUDIO Cable
 

11Xerox© LCD Monitor User’s Manual
Introduction
ENGLISH
Front View and Controls
 ▼▲  
  In OSD mode, press the ▲/▼ buttons to select the desired 
menu.  Adjusts the speaker volume up and down.
  MENU
  Press once to display the OSD (On Screen Display).  And 
press again to activate the desired setting.
   LED 
   The LED light indicates when the LCD monitor is activated 
(blue light indicates power on and amber light indicates 
power saving).
  
   Turns the LCD monitor on and off.
 AUTO
  Press to...

Installation
12Xerox© LCD Monitor User’s Manual

1 Turn off the computer and unplug the power cord.
2 Connect the signal cable to the D-SUB port on the back of 
the computer.
3 Connect the audio cable to the line-in port on the back of the 
computer.
Refer to the owner’s manual of the computer for connections.
In the process of connecting external equipment, do not connect 
any AC power cords to wall outlets until all other connections 
are completed.
2  Installation
Connecting Your LCD Monitor to a...

Installation
ENGLISH
13Xerox© LCD Monitor User’s Manual

4 Connect the power cord to the LCD monitor and wall outlet. 
 
5 Press the     button, located on the bottom side of the main 
unit to turn the monitor on, then turn the computer on. If the 
monitor displays an image, the monitor is successfully 
installed. If no image is displayed, check all connections.
NOTE:
Unplug the monitor before installation to avoid electric shock or 
damage.
NOTE:
The     button is used for switching the LCD monitor on...

Installation
14Xerox© LCD Monitor User’s Manual

Method 2: Digital (DVI) Connection 
1 Turn off the computer and unplug the power cord
2 Connect the DVI signal cable (not included) to the DVI port 
on the back of the computer.
3 Connect the audio cable to the line-in port on the back of the 
computer.
4 Connect the power cord to the LCD monitor and wall outlet. 
  
5 Press the     button, located on the bottom side of the main 
unit to turn the monitor on, then turn the computer on. If the 
monitor...

Installation
ENGLISH
15Xerox© LCD Monitor User’s Manual

Connect to power source4
2Connect to the DVI port 
Connect to the Line-in port3
The wide-screen display enables you to view your content in a brand new way. The next generation of computing environments and game consoles are planning to support wide-screen resolutions.■  Multitask  -  view applications side by side and reduce toggling between them.■  Enrich  -  view DVD films in their native wide format for an enhanced multimedia experience.■...

Installation
16Xerox© LCD Monitor User’s Manual
Installing Your LCD Monitor
Follow the instructions below to set up and install the monitor.
1 The package contains:
  Display unit
  Stand
2 Cover an even stable surface with a soft cloth. Place the unit 
face-down on the cloth. Fit the stand onto the bottom of the 
display unit as shown, then push until the two latches snap 
into their sockets.
LATCHES
LATCH SOCKETS
 

OSD Menu
ENGLISH
17Xerox© LCD Monitor User’s Manual
To create the best picture, your XM3-19w has been preset at 
the factory with the Preset Mode Timing shown on page 24.
The OSD (On Screen Display) Menu allows the user to adjust
various settings and options by following the steps below.
1  Press the MENU button to display the OSD. The OSD main 
menu provides an overview of the selection of controls 
available.
2  Press the ▲ or ▼ button to highlight the desired icon.  Then, 
press the MENU button to...

OSD Menu
18Xerox© LCD Monitor User’s Manual

picture
advanced
audio
options
utilities
reset
exit
auto adjust to select
brightness
contrast
h position
v position
phase
clock
exit
The main menu includes the following options:
    picture  
 Adjusts picture settings such as brightness, contrast.
     advanced 
 Allows selection of the general color tint: CUSTOM COLOR, 
WARM, or COOL.
     audio
 Allows selection of the sound options and effects.
     options 
 Adjusts picture settings such as H/V position,...

OSD Menu
ENGLISH
19Xerox© LCD Monitor User’s Manual

picture
advanced
audio
options
utilities
reset
exit
auto adjust to select
brightness
contrast
h position
v position
phase
clock
exit
1 The picture menu provides access to the following menus:
The picture Menu
2  The picture menu includes the following options:ON  DESCRIPTION
    auto adjust  Automatically adjust the display settings to optimize performance based on the D-SUB signal.
     brightness  Controls the overall brightness.
     contrast...