Xerox Xa3 17 Users Guide

10Xerox© LCD Monitor User’s Manual
Introduction

Make sure all of the following contents are included in the box.
If any items are missing, please return this product to the 
original place of purchase.
CAUTION:
Be sure to save original box and all packing material for future 
transport of monitor.
ACPower Cord
Package Contents
LCD Monitor 
Quick GuideWarranty CardCD-ROM(Driver/Manual)
 

11Xerox© LCD Monitor User’s Manual
Introduction
ENGLISH
Front View and Controls
  ▼▲  
  In OSD mode, press the 
▲/▼ buttons to select the desired 
menu.
 MENU
  Press once to display the OSD (On Screen Display).  And 
press again to activate the desired setting.
 LED 
    The LED light indicates when the LCD monitor is activated 
(green light indicates power on and amber light indicates 
power saving).
   
   Turns the LCD monitor on and off.
  AUTO
  Press to automatically adjust the display settings...

Installation
1Xerox© LCD Monitor User’s Manual

1 Turn off the computer and unplug the power cable.
2 Connect the signal cable to the D-SUB port on the back of 
the computer.
3 Connect the power cord to the LCD monitor and wall outlet.  
Refer to the owner’s manual of the computer for connections.
In the process of connecting external equipment, do not connect 
any AC power cords to wall outlets until all other connections 
are completed.
2  Installation
Connecting Your LCD Monitor to a Computer...

Installation
ENGLISH
1Xerox© LCD Monitor User’s Manual

4 Press the     button, located on the bottom side of the main 
unit to turn the monitor on, then turn the computer on. If the 
monitor displays an image, the monitor is successfully 
installed. If no image is displayed, check all connections.
NOTE:
Unplug the monitor before installation to avoid electric shock or 
damage.
NOTE:
The     button is used for switching the LCD monitor on and 
off, it does not disconnect the device from the main...

Installation
1Xerox© LCD Monitor User’s Manual
Installing Your LCD Monitor
Follow the instructions below to set up and install the monitor.
1 The package contains:
  Display unit
  Stand
2 Cover an even stable surface with a soft cloth. Place the unit 
face-down on the cloth. Fit the stand onto the bottom of the 
display unit as shown, then push until the two latches snap 
into their sockets.
LATCHES
LATCH SOCKETS
 

OSD Menu
ENGLISH
1Xerox© LCD Monitor User’s Manual
To create the best picture, your XA3 series has been preset at
the factory with the Preset Mode Timing shown on page 21.
The OSD (On Screen Display) Menu allows the user to adjust
various settings and options by following the steps below.
1 Press the MENU button to display the OSD. The OSD main 
menu provides an overview of the selection of controls 
available.
2 Press the 	▲	or ▼	button to highlight the desired icon.  Then, 
press the MENU button...

OSD Menu
1Xerox© LCD Monitor User’s Manual

picture
advanced
options
utilities
reset
exitauto adjust 
to select
brightness
contrast
h position
v position
phase
clock
exit
The main menu includes the following options:
   picture  
 Adjusts picture settings such as brightness, contrast.
	 		 advanced	
 Allows selection of the general color tint: CUSTOM COLOR, 
WARM, or COOL.
     options 
 Adjusts picture settings such as H/V position, H size and 
phase.
     utilities 
 Adjusts the setting of the...

OSD Menu
ENGLISH
1Xerox© LCD Monitor User’s Manual

picture
advanced
options
utilities
reset
exitauto adjust 
to select
brightness
contrast
h position
v position
phase
clock
exit
1 The picture menu provides access to the following menus:
The picture Menu
2 The picture menu includes the following options:ON	 DESCRIPTION
    auto adjust
  Automatically adjust the display settings to optimize 
performance based on the D-SUB signal.
     brightness 
 Controls the overall brightness.
     contrast...

OSD Menu
1Xerox© LCD Monitor User’s Manual

2 The advanced menu includes the following options:ON	 DESCRIPTION     sharpness 			
   Increase this setting to see crisp edges in the picture; 
decrease for soft edges. 
     color 			
    Allows selection of the general color tint: 
    user, natural, warm, or cool.
cool 
Inclines colors toward the blue end of the spectrum.  Fixes the red, green and blue component levels at factory settings; they cannot be independently adjusted.
natural 
Inclines...

OSD Menu
ENGLISH
1Xerox© LCD Monitor User’s Manual

2 The options menu includes the following options:ON	 DESCRIPTION
  osd h. position     
Moves the OSD left and right in the window.
	 osd	v.	position		
Moves the OSD up and down in the window.
 exit 
Exits the OSD menu.
1 The options menu provides access to the following menus:
The options Menu
picture
advanced
options
utilities
reset
exit
osd h position
osd v position
exit