Xerox WorkCentre 5740A User Manual

Windows 2000/2003/XP/Vista Environment
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide71
8. Touch [Subnet and Gateway], the Subnet and Gateway screen displays.
a. For IP Gateway, touch each octet under the title and enter IP Gateway address using the 
numerical keypad.
b. Repeat this process for the Subnet Mask. When you are finished, touch [Save] to accept the 
changes and return to the TCP/IP Settings screen. 
c. Touch [Close] to return to the TCP /I P screen.
9. Touch...

Windows 2000/2003/XP/Vista Environment
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide 72
b. Touch [Save], then touch [Close] to return to the To o l s pathway.
DNS/DDNS Configuration
1. From the To o l s  pathway, touch [Network Settings].
2. Touch [Network Setup].
3. Touch [TCP IP].
4. Touch [TCP/IP Settings].
5. Touch [DNS Configuration], the DNS Configuration screen displays.
This feature will be inaccessible (grayed out) if TCP/IP protocol is not enabled.
a. Touch the...

Windows 2000/2003/XP/Vista Environment
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide73
Install Print Drivers
Add the Printer
1. At your workstation:
•Windows XP - from the [Start] menu select [Printers and Faxes].
•Windows 2000/2003 - from the [Start] menu select [Control Panel] then select [Printers].
•Windows Vista - from the [Start] menu select [Control Panel], then double-click on 
[Printers].
2. Click on [Add Printer].
a. For Windows 2000/2003/XP, click on [Next].
3. For...

Windows 2000/2003/XP/Vista Environment
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide 74
12. Select the required driver.
13. Click on [Open] and then [OK].
14. Select the model of your machine from the list. Click on [Next].
15. The Name your Printer screen displays. Enter a printer name and click on [Next].
16. The Printer Sharing Screen appears. If you will be sharing this printer with other clients select 
[Share As] (Windows 2000) or [Share Name] (Windows 2003) and enter a...

Windows 2000/2003/XP/Vista Environment
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide75
Configure the Print Driver - Manually
To configure the Print Driver without using bi-directional communication return to the Configuration 
tab within the Properties of the Print Driver.
1. Click on [Installable Options].
2. Select the options that are installed on the device.
3. Click on [OK].
4. Click on the [General] tab.
5. Click on [Print Test Page].
6. Click on [OK] to close the...

Windows 2000/2003 using AppleTalk
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide 76
Windows 2000/2003 using AppleTalk
Information Checklist
Before starting the procedure, ensure the following items are available or tasks have been performed:
• An existing operational AppleTalk network with Macintosh workstation computers equipped with 
Ethernet network interface cards.
• The AppleTalk Name you wish to assign to your printer.
• The AppleTalk Zone (if used) in which your printer...

Windows 2000/2003 using AppleTalk
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide77
At your Workstation
1. Right-click on [My Network Places].
2. Select [Properties].
3. Right mouse click on the network connection you want to configure AppleTalk on, and then click 
on [Properties]. The Connection Properties dialog box opens.
4. On the General tab, if the AppleTalk Protocol is in the list of installed protocols, make sure that it is 
selected. If the AppleTalk protocol is not...

Windows 2000/2003 using AppleTalk
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide 78
Configure the Print Driver
If your device has any installable options fitted then these should be set in the driver, for example, a 
High Capacity Feeder or a Finisher.
At your Desktop
1. Select [Start], ([Settings]) and then [Printers]/[Printers and Faxes].
2. Right-click on the appropriate printer icon and select [Properties].
3. Click on the [Configuration] tab.
4. Click on [Installable...

Windows using Microsoft (R) Networking
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide79
Windows using Microsoft (R) Networking
NetBIOS over IP
Information Checklist
Before starting the procedure, ensure the following items are available or tasks have been performed:
• An existing operational network utilizing the TCP/IP protocol.
• A Static IP Address for the machine.
• A Subnet Mask Address for the machine.
• A Gateway Address for the machine.
• A Host Name for the machine.
•...

Windows using Microsoft (R) Networking
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide 80
8. Touch [TCP/IP-Line Printer], in the TC P / I P  -  L i n e  Pr i nt e r screen,
a. Touch [Enable], to enable the option.
b. If you wish to change the LPR port for your device, touch the port number area and enter the 
desired port number using the numerical keypad.
Note:While you can change the port number at which your machine will accept LPR print jobs it is 
recommended that you do...