Xerox Phaser 4510DT User Manual

Cleaning the Printer
Phaser® 4510 Laser Printer
5-3 2.Remove the feed roll from the paper tray shaft.
a.Push down on the shaft of the feed roll (1), and then widen the tab of the feed roll to 
loosen it (2).
b.Remove the feed roll from the paper tray shaft (3).
3.Clean the rollers with a damp cloth.
1
3
2
4510-116
4510-117
Downloaded From ManualsPrinter.com Manuals 

Cleaning the Printer
Phaser® 4510 Laser Printer
5-4 4.Reinsert the feed roll on the paper tray shaft.
5.Align the tabs on the feed roll with the slots on the shaft (1), and then push the feed roll 
completely onto the shaft (2).
6.Push the paper tray back into the printer.
1
2
4510-118
4510-044
Downloaded From ManualsPrinter.com Manuals 

Ordering Supplies
Phaser® 4510 Laser Printer
5-5
Ordering Supplies
This section includes:
■Consumables on page 5-5
■Routine Maintenance Items on page 5-5
■When to Order Supplies on page 5-6
■Recycling Supplies on page 5-6
Certain consumables and routine maintenance items need to be ordered occasionally. Each 
supply includes the installation instructions.
Consumables
Print cartridges are the only consumable. For information about supplies, go to 
www.xerox.com/office/4510supplies
. Print cartridges...

Ordering Supplies
Phaser® 4510 Laser Printer
5-6
When to Order Supplies
The control panel displays a warning when the supply nears its replacement time. Verify that 
you have replacements on hand. It is important to order these supplies when the messages first 
appear to avoid interruptions to your printing. The control panel displays an error message 
when the supply must be replaced.
To view the current status of your printer supplies, print the Supplies Usage page:
1.On the control panel, select...

Extended Periods of Non-Use
Phaser® 4510 Laser Printer
5-7
Extended Periods of Non-Use
Perform the following procedure if the printer will not be used for a long period of time.
1.Turn the power switch to off.
2.Remove the power cord and other cables.
Warning:Due to the risk of electric shock, you should not touch the power cord with wet 
hands. For additional safety information, see User Safety on page A-1.
3.Empty all paper trays, and store the media in a location free of humidity and dust.
4510-011...

Moving and Repacking the Printer
Phaser® 4510 Laser Printer
5-8
Moving and Repacking the Printer
This section includes:
■Precautions for Moving the Printer on page 5-8
■Moving the Printer Within the Office on page 5-8
■Preparing the Printer for Shipment on page 5-8
See also: 
User Safety on page A-1
Precautions for Moving the Printer
To view precautions and guidelines for safely moving your printer, see the User Safety 
appendix in this user guide.
Moving the Printer Within the Office
The printer can be...

Phaser® 4510 Laser Printer
6-1 This chapter includes:
■Clearing Paper Jams on page 6-2
■Getting Help on page 6-24
See also: 
Print Quality on page 4-1
Cleaning the Feed Roller on page 5-2
Troubleshooting
Downloaded From ManualsPrinter.com Manuals 

Clearing Paper Jams
Phaser® 4510 Laser Printer
6-2
Clearing Paper Jams
This section includes:
■Preventing Jams on page 6-2
■Jam at Tray 1, 2, 3, or 4 on page 6-3
■Jam at the Exit and Jam at the Rear on page 6-7
■Jam at the Exit and Jam at the Rear (with Duplex Unit) on page 6-9
■Jam at the Exit - Open Top Cover to Clear on page 6-11
■Jam at the Top Cover on page 6-13
■Jam at the Duplex Unit on page 6-17
■Jam at the Stacker on page 6-18
■Paper Size Jam on page 6-20
Note:If you clear a jam without opening...

Clearing Paper Jams
Phaser® 4510 Laser Printer
6-3
Jam at Tray 1, 2, 3, or 4
The control panel will specify the tray that has a paper jam. On the control panel, you can 
press the Help (?) button to view information about the paper jam.
To clear the jam:
1.Pull the tray(s) specified on the control panel completely out of the printer.
Note:For all trays except Tray 2, pull out the specified tray and all trays above it. For 
example, if the jam is at Tray 3, pull out Trays 1, 2, and 3. If you have a jam at...

Clearing Paper Jams
Phaser® 4510 Laser Printer
6-4 2.Pull jammed paper from the printer tray slot.
3.Remove crumpled paper from the tray.
4.If you have a stacker, remove paper from the stacker, and then lift the stacker tray.
4510-037
4510-038
4510-0054510-006
Downloaded From ManualsPrinter.com Manuals