Home > Xerox > Printer > Xerox Phaser 4510 User Manual

Xerox Phaser 4510 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Xerox Phaser 4510 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 228 Xerox manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Printer Configurations
    Phaser® 4510 Laser Printer
    1-5
    Available Configurations
    The Phaser 4510 printer is available in four standard configurations.
    Feature Printer Configurations
    4510B 4510N 4510DT 4510DX
    Maximum Resolution True
    1200 x 1200Tr u e
    1200 x 1200Tr u e
    1200 x 1200Tr u e
    1200 x 1200
    Maximum Print Speed 45 ppm Letter, 43 ppm A4 (all configurations)
    PostScript and PCL Fonts Standard Standard Standard Standard
    Memory (MB)** 128 128 128 128
    20 MB Flash Memory Optional Optional Optional Optional
    Hard Drive Optional Optional Optional Standard
    Automatic 2-Sided Printing 
    (Duplex)Optional Optional Standard Standard
    Duplex Printing Speed 27 ipm
    (if installed)27 ipm
    (if installed)27 ipm 27 ipm
    550-Sheet Feeder  Optional Optional Standard Standard
    500-Sheet Stacker Optional Optional Optional Standard
    Connectivity Parallel, USB* 10/100 
    Ethernet, 
    Parallel, USB10/100 
    Ethernet, 
    Parallel, USB10/100 
    Ethernet, 
    Parallel, USB
    * 10/100 Ethernet is available as an option.
    ** Expandable to 512 MB.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Printer Configurations
    Phaser® 4510 Laser Printer
    1-6
    Options
    You can order additional trays, memory, and a hard drive if these items are not standard on 
    your printer. Print the Configuration page to see which options are installed on your printer. To 
    print the Configuration page, see Information Pages on page 1-8.
    Options include the following:
    ■550-Sheet Feeder (includes tray)
    ■550-Sheet Tray
    ■500-Sheet Stacker with Job Offset
    ■Duplex Unit
    ■Hard Drive - Provides additional printer features:
    ■Secure, personal, personal saved, proof, and saved print jobs
    ■Font storage
    ■128 MB and 256 MB memory cards (maximum of 512 MB installed memory in two slots)
    ■20 MB Flash Memory
    To order options for your Phaser 4510 Laser Printer, contact your local reseller or go to 
    www.xerox.com/office/4510supplies
    .
    Upgrades
    To order the Phaser 4510B to 4510N upgrade, contact your local reseller or go to 
    www.xerox.com/office/4510supplies
    .
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Control Panel
    Phaser® 4510 Laser Printer
    1-7
    Control Panel
    This section includes:
    ■Control Panel Features on page 1-7
    ■Control Panel Layout on page 1-8
    ■Menu Map on page 1-8
    ■Information Pages on page 1-8
    ■Sample Pages on page 1-9
    ■Power Saver Settings on page 1-9
    Control Panel Features
    The control panel:
    ■Displays the printer’s operating status (for example, Printing, Ready to Print), printer 
    errors, and warnings.
    ■Prompts you to load paper, order and replace supplies, and clear jams.
    ■Enables you to access tools and information pages to help resolve problems.
    ■Enables you to change printer and network settings.
    ■Enables you to access supply status.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Control Panel
    Phaser® 4510 Laser Printer
    1-8
    Control Panel Layout
    Menu Map
    The Menu Map helps you navigate the control panel menus. To print the Menu Map:
    1.On the control panel, select 
    Information, and then press the OK button.
    2.Select 
    Menu Map, and then press the OK button to print.
    Note:Print the Menu Map to see other information pages available for printing.
    Information Pages
    Your printer comes with a set of information pages to help you obtain the best results from 
    your printer. Access these pages from the control panel. Print the Menu Map to see where 
    these information pages are located in the control panel menu structure. 
    For example, to print the Configuration page or the Supplies Usage page to view current 
    information about your printer, do the following:
    1.Status Indicator LED:
    Green: Printer is ready to print.
    Ye l l o w: Warning condition, printer continues to 
    print.
    Red: Startup sequence or error condition.
    Blinking: Printer is busy or warming up.
    2.Graphic display indicates status messages 
    and menus.
    3.Back button
    Returns to the previous menu item.
    4.Cancel button
    Cancels the current print job.5.Up Arrow button
    Scrolls upward through the menus.
    6.Help (?) button
    Displays a help message with information 
    about the printer, such as printer status, error 
    messages, and maintenance information.
    7.Down Arrow button
    Scrolls downward through the menus.
    8.OK button
    Accepts the setting selected.
    Note:This print icon appears before the titles of information pages that can 
    be printed. When the page is highlighted on the control panel, press the 
    OKbutton to print that page.
    Phaser 4510
    4510-068
    45
    78 3 126
    Downloaded From ManualsPrinter.com Manuals 
    						
    							
    Control Panel
    Phaser® 4510 Laser Printer 1-9
    1.
    On the control panel, select 
    Information, and then press the  OK button.
    2. Select 
    Information Pages, and then press the  OK button.
    3. Select 
    Configuration Page or Supplies Usage Page, and then press the  OK button to 
    print.
    Note: You can also print informatio n pages from CentreWare Inte rnet Services (IS) and from 
    the printer driver.
    Sample Pages
    Your printer comes with a set of sample page s that demonstrate different printer functions.
    To print the sample pages:
    1. On the control panel, select 
    Information, and then press the  OK button.
    2. Select 
    Sample Pages, and then press the  OK button.
    3. Select the desired sample page, and then press the  OKbutton to print.
    See also:  Advanced Features Guide  at  www.xerox.com/office/4510support
    Power Saver Settings
    Factory Default:
    ■Power Saver: On
    ■Power Saver Timeout: 4 minutes
    You can change the default power saver time on  the control panel or through CentreWare IS.
    Using the Control Panel:
    1.On the control panel, select Printer Setup > Printer Controls, then press the  OK button.
    2. Verify that 
    Power Saver is On. If Power Saver is Off, then select Power Saver and press 
    the  OK  button to switch between 
    Off and On.
    3. Select 
    Power Saver Timeout to select the new time.
    4. Press the  OK button.
    Using CentreWare IS:
    1. Launch your web browser.
    2. Enter the printer’s IP address  in the browser’s Address field.
    3. Select  Properties .
    4. Select the  General folder on the left nagivation panel, then click  Printer Defaults.
    5. In the  User Preferences  section, set the Power Saver option to On.
    6. Select the new time from  Power Saver Timeout.
    7. Click the  Save Changes  button.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							More Information
    Phaser® 4510 Laser Printer
    1-10
    More Information
    This section includes:
    ■Resources on page 1-10
    ■Xerox Support Centre on page 1-11
    Obtain information regarding your printer and its capabilities from the following sources.
    Resources
    Information Source
    Installation Guide* Packaged with printer
    Quick Use Guide* Packaged with printer
    User Guide (PDF)*  Packaged with printer 
    (Software and Documentation CD-ROM)
    Warranty Packaged with printer
    Advanced Features Guide (PDF)www.xerox.com/office/4510support
    Quick Start Tutorialswww.xerox.com/office/4510support
    Printer Management Toolswww.xerox.com/office/pmtools
    Online Support Assistantwww.xerox.com/office/4510support
    PhaserSMARTwww.phaserSMART.com
    Technical Supportwww.xerox.com/office/4510support
    Information about menu selection or error 
    messages on control panelControl panel Help (?) button
    Information pages Control panel menu
    * Also available on the Support website.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							More Information
    Phaser® 4510 Laser Printer
    1-11
    Xerox Support Centre
    The Xerox Support Centre is a utility that is installed during printer driver installation. It is 
    available for printers with Windows 2000 and later or Mac OS X, version 10.2 and higher.
    The Xerox Support Centre appears on the desktop for Windows printers or is placed in the 
    Mac OS X dock. It provides a central location for accessing the following information:
    ■User manuals and video tutorials
    ■Solutions to troubleshooting problems
    ■Printer and supplies status
    ■Supplies ordering and recycling
    ■Answers to frequently asked questions
    ■Default printer driver settings (Windows only)
    To start the Xerox Support Centre utility:
    Note:If you have a USB or parallel connection, some of the status information is not 
    available. You must have an Internet connection to view manuals and videos on the website. 1.Select one of the following options:
    ■Windows: Double-click the Xerox Support Centre icon 
    on your desktop.
    ■Macintosh: Click the Xerox Support Centre icon in the 
    dock.
    2.Select your printer from the Select Printer drop-down list.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Phaser® 4510 Laser Printer
    2-1 This chapter includes:
    ■Overview of Network Setup and Configuration on page 2-2
    ■Choosing a Connection Method on page 2-3
    ■Configuring the Network Address on page 2-5
    ■Installing the Printer Drivers on page 2-9
    ■IPv6 on page 2-14
    This chapter provides basic information about setting up and connecting to your printer. 
    See also: 
    Advanced Features Guide at www.xerox.com/office/4510support
    Network Basics
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Overview of Network Setup and Configuration
    Phaser® 4510 Laser Printer
    2-2
    Overview of Network Setup and Configuration
    To set up and configure the network:
    1.Connect the printer to the network using the recommended hardware and cables.
    2.Turn on the printer and the computer.
    3.Print the Configuration page and keep if for referencing network settings.
    4.Configure the printer’s TCP/IP address, which is required to identify the printer on the 
    network. 
    ■Windows operating systems: Run the Installer on the Software and Documentation 
    CD-ROM to automatically set the printer’s IP address if the printer is connected to an 
    established TCP/IP network. You can also manually set the printer’s IP address on the 
    control panel.
    ■Macintosh systems: Manually set the printer’s TCP/IP address on the control panel.
    5.Install the driver software on the computer from the Software and Documentation 
    CD-ROM. For information on driver installation, see the section in this chapter for the 
    specific operating system you are using.
    Note:If the Software and Documentation CD-ROM is not available, you can download the 
    latest driver from www.xerox.com/drivers
    .
    See also: 
    Advanced Features Guide at www.xerox.com/office/4510support
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Choosing a Connection Method
    Phaser® 4510 Laser Printer
    2-3
    Choosing a Connection Method
    Connect the printer via Ethernet, USB, or parallel. A USB or a parallel connection is a direct 
    connection and is not used for networking. An Ethernet connection is used for networking. 
    Hardware and cabling requirements vary for the different connection methods. Cabling and 
    hardware are generally not included with your printer and must be purchased separately.This 
    section includes:
    ■Connecting via Ethernet (Recommended) on page 2-3
    ■Connecting via USB on page 2-4
    ■Connecting via Parallel on page 2-4
    Connecting via Ethernet (Recommended)
    Ethernet can be used for one or more computers. It supports many printers and systems on an 
    Ethernet network. An Ethernet connection is recommended because it is faster than a USB 
    connection. It also allows you direct access to CentreWareInternet Services (IS). The 
    CentreWare IS web interface enables you to manage, configure, and monitor networked 
    printers from your desktop.
    Network Connection
    Depending on your particular setup, the following hardware and cabling is required for 
    Ethernet.
    ■If you are connecting to one computer, an Ethernet RJ-45 crossover cable is required. 
    ■If you are connecting to one or more computers with an Ethernet hub, or cable or DSL 
    router, two or more twisted-pair (category 5/RJ-45) cables are required. (One cable for 
    each device.)
    If you are connecting to one or more computers with a hub, connect the computer to the hub 
    with one cable, and then connect the printer to the hub with the second cable. Connect to any 
    port on the hub except the uplink port.
    See also: 
    Configuring the Network Address on page 2-5
    Installing the Printer Drivers on page 2-9
    Downloaded From ManualsPrinter.com Manuals 
    						
    All Xerox manuals Comments (0)

    Related Manuals for Xerox Phaser 4510 User Manual