Xerox Documate 4760 User Guide

							Xerox® DocuMate® 4760 Loading Documents to Scan
26User Guide
3. Load the documents fa c e  d o w n with the top of the pages inserted into the Automatic 
Document Feeder.
4. You can now scan the documents using the scanner buttons, OneTouch, or one of the other 
scanning interfaces. 
						

							Loading Documents to Scan Xerox® DocuMate® 4760
User Guide27
Scanning Interfaces
•OneTouch Control Panel—When you press the Simplex or Duplex button on the scanner, the 
scanner starts scanning using the settings for the current LED number. The scanned image is 
then sent to a destination on your computer or network drive. 
OneTouch Button Panel—Use this scan option when you want to scan from the computer 
screen. Scanning from the on-screen OneTouch Button Panel is the same as selecting a 
scanning option on the scanner, except you click an icon that represents the function.
Please see the OneTouch Scanning Guide on the installation disc for instructions. You can also 
click the Help button in the OneTouch Properties window to open the instructions in an 
Internet browser.
Scanner Control Panel OneTouch Button Panel 
						

							Xerox® DocuMate® 4760 Loading Documents to Scan
28User Guide
•TWAIN and WIA Interface—This option uses your scanner’s TWAIN interface to scan. 
Select scanning options before scanning, put the document in the scanner, then click the 
Scan button in the TWAIN interface window. 
Please see the TWAIN Scanning Guide on the installation disc for instructions. You can also 
click the Help button in the TWAIN interface to open the instructions in an Internet browser.
•ISIS Interface—This option uses the ISIS interface for scanning. Please refer the user 
manual for your ISIS scanning application for instructions on scanning with the ISIS interface. 
						

							User Guide29
Maintenance
This section contains information about maintenance, troubleshooting, uninstalling, scanner 
specifications, and spare parts.
Safety Precautions
When servicing the scanner you should take the following precautions to ensure your safety and 
prevent damage to the scanner.
Do These
• Wear protective gloves when cleaning the scanner with Isopropyl rubbing alcohol. Rubbing 
alcohol may irritate sensitive skin.
• Only perform scanner maintenance as described in this chapter.
• Keep the scanner and cleaning supplies away from any open flame or heat source as any 
form of alcohol is flammable.
• Always read the instructions in each section carefully, the instructions are specific to the part 
you are installing or servicing.
• Move the scanner to an area that has adequate room for opening the scanner.
• If your scanner has a power cord and/or power switch, always turn off the scanner and unplug 
the power cord before performing maintenance, unless the maintenance instructions below 
specifically state to leave the scanner plugged in and powered on.
• Always unplug the USB cable from the scanner before performing maintenance, unless the 
maintenance instructions below specifically state to leave the scanner plugged in.
• Wear an anti-static strap to prevent electrostatic discharge when touching metal 
components.
• Keep all cleaning supplies, scanner parts and accessories out of the reach of children.
Do Not Do These
• Never attempt installation of any part not described in this manual.
• Never service the scanner near a radiator or any other heat source.
• Never use aerosol sprays or compressed air, or attempt to lubricate parts with an oil or silicon 
spray.
• Never service the scanner in an area where there are open liquid containers.
• Never pour or spill liquid on the scanner or any of its components. 
						

							Xerox® DocuMate® 4760 Maintenance
30User Guide
Hardware Properties
You can use the scanner’s properties page to keep track of scanner maintenance, change some of 
the hardware options, configure the scanner interface behavior, and adjust application options 
that may be available for your scanner.
To open the scanner hardware properties page:
•Windows 7 and later—from the Windows Control Panel, open Hardware and Sound and 
then Devices and Printers. Right-click on the scanner and then select Scan properties from 
the list. 
•Windows Vista—from the Windows Control Panel, open Hardware and Sound and then 
Scanners and Cameras. Click on the scanner icon then click on the Properties button. 
•Windows XP—from the Windows Control Panel when in category view, open Printers and 
Other Hardware and then Scanners and Cameras. Right-click on the scanner and then 
select Properties from the list.
Device Settings
The Device Settings tab shows the hardware information for your scanner. The options on the 
Device Settings tab will be available based on whether or not the scanner hardware supports the 
feature. Some features described herein may not be available for the current scanner. Please 
disregard any information about features that you do not see in the interface for your scanner.
Scanner Details
•Firmware version—this is the scanner’s hardware processor version number.
•Serial number—the scanner’s unique identification number.
•LLD version—the scanner’s base driver version. This is not the OneTouch software revision, 
TWAIN or WIA driver versions.
•Driver version—this is the version of the scanner’s TWAIN driver. 
						

							Maintenance Xerox® DocuMate® 4760
User Guide31
Power Settings 
•Sleep mode—sleep mode is the low-power state when the scanner is not in use. You can 
adjust the amount of time you want the scanner to wait before it goes into low power. 
Click the green enter button to save any changes in the Sleep mode field.
Click the red reset button to reset to the default timeout value.
•Power off—input the number of minutes you want the scanner to wait before it turns itself 
off. 
Click the green enter button to save any changes in the power off field.
Click the red reset button to reset to the default timeout value.
Scanner Settings
•Counters—click the reset button next to the counter you want to set back to 0.
Firmware Update
This option is not available for all scanners.
•Check for update—check the scanner’s firmware version against the version included with 
the scanner driver. When the scanner is connected to the computer and this option is 
selected, or when a different scanner of the same model is connected, a notification will show 
indicating that the firmware version is out of date. Deselect this option to stop being notified 
of the different version if you do not want to update the firmware.
•Update—click this button to update the scanner’s firmware with the latest revision provided 
in the driver installer. Follow the instructions on-screen to update the scanner’s firmware. Do 
not turn off the scanner or close any on-screen dialogues while the firmware update is in 
process. Turning off the scanner or closing any on-screen dialogues before you are prompted 
could irrevocably damage the scanner and prevent it from working. The firmware update 
software will prompt you when it is safe to power cycle the scanner. 
						

							Xerox® DocuMate® 4760 Maintenance
32User Guide
Driver Settings
The options in this panel are for configuring how the TWAIN interface will behave in some 
scenarios. Please see the TWAIN scanning guide on the installation disc for instructions. 
Clearing Paper Jams
If your scanner stops scanning due to a paper jam in the Automatic Document Feeder, a warning 
opens after a few moments.
1. Open the Automatic Document Feeder cover.
2. Remove the jammed paper and close the cover. 
						

							Maintenance Xerox® DocuMate® 4760
User Guide33
To reduce the number of paper jams, smooth and straighten the paper before scanning, adjust 
the guides to the paper size, and insert the paper evenly into the ADF.
Cleaning the Scanner
Regular maintenance of your scanner can help to ensure continual optimal performance. 
Using a soft, lint-free cloth, wipe down all plastic surfaces on the scanner.
Cleaning Inside the Automatic Document Feeder
Cleaning the inside of the scanner helps to keep your scanner operating at optimum performance. 
You should clean the inside of the scanner at least once a week or after 1,000 pages have been 
scanned. If you are getting frequent paper jams, multiple pages feeding at the same time, or 
you’re seeing lines in the scanned image, it is time to clean the scanner.
Note: Be careful when cleaning the rollers. All of the rollers, except the free rollers, are designed to 
rotate in one direction only. Do not force the roller to rotate in the opposite direction. Forcing the 
roller to rotate will damage it, and cause the scanner to feed pages incorrectly.
1. Wet a soft cloth with some Isopropyl rubbing alcohol (70%).
2. Open the Automatic Document Feeder cover.
3. Wipe clean the feed rollers and scanner glass in the scanner body. 
4. Close the scanner when you’re finished. 
						

							Xerox® DocuMate® 4760 Maintenance
34User Guide
Replacing the Rollers
Frequent paper jams are a symptom of a worn roller assembly. A worn roller can cause documents 
to feed in skewed at an angle, or multiple pages to feed at the same time. A worn roller should be 
replaced to avoid damage to the scanner’s internal parts. Before replacing the roller you should 
clean it as excessive dust on the roller will make it appear worn and smooth. You cannot properly 
diagnose a worn roller until you have cleaned it.
Replacing the Separation Roller
The roller will wear out and is designed to be a user-replaceable part. A worn roller can cause 
documents to feed in skewed at an angle, or multiple pages to feed at the same time. Before 
replacing the roller you should clean it as excessive dust on the roller will make it appear worn and 
smooth. You cannot properly diagnose a worn roller until you have cleaned it. You should generally 
replace the roller between 80,000 and 100,000 scans. 
Replacement parts can be purchased from the Parts & Accessories page for your scanner at 
www.xeroxscanners.com
.
1. Lift the ADF cover release, on the top of the scanner, to open the Automatic Document 
Feeder cover. The roller module and housing are located in the underside of the ADF cover.
2. Grab the top of the roller housing, just beneath the ADF cover release.  
						

							Maintenance Xerox® DocuMate® 4760
User Guide35
3. Firmly pull the roller housing towards you. You will hear it release from the scanner cover. 
Leverage the roller housing out of the scanner.
4. Place the roller housing face down on a flat surface. 
5. Pinch the arms on either side of the roller module and pull the roller module out of the 
housing. 
6. Discard the roller, it cannot be repaired or reused. 
7. Before installing the new roller, clean any dust that may have gotten on it during shipping. 
8. Place the new roller module in the housing a press down, on the back of the roller module, 
until the arms on the roller module snap into place.