Xerox Documate 4760 User Guide

Xerox® DocuMate® 4760Welcome
6User Guide
System Requirements
• Intel Pentium 4 or equivalent processor
• DVD-ROM drive capable of reading Dual Layer DVDs
• Universal Serial Bus (USB) port
•Microsoft
® Windows® operating system: 
– 32-bit Windows XP (Service Pack 3)
– 32-bit or 64-bit Windows Vista (Service Pack 2)
– 32-bit or 64-bit Windows 7 (Service Pack 1)
– 32-bit or 64-bit Windows 8 / 8.1
– 32-bit or 64-bit Windows 10
• 2 gigabyte (GB) internal memory (RAM)
• Minimum available hard disk space:
– 350...

WelcomeXerox® DocuMate® 4760
User Guide7
•Technical support card—contact information for technical support and customer service, 
and a brief overview of our standard product warranty.
•Warranty card—the warranty card is provided for users in Russia and should be filled in as 
described on the card. For all other users, please dispose of this card in paper recycling.
The following soft-copy documentation is available on the installation disc:
•Scanner user guide—instructions for scanner setup,...

Xerox® DocuMate® 4760Welcome
8User Guide
–Status Light / Power Button—Turns the scanner’s power on/off and indicates the 
scanner’s status.
5.Output Tray—Holds documents after being scanned.
6.Universal Serial Bus (USB) Port—Connect the scanner to the computer via the USB 2.0 
cable.
7.Power Jack—Connect the power cord to the scanner. 

User Guide9
Scanner Setup
1. Remove the scanner from its protective foam and plastic bag.
2. Remove any shipping tape from the scanner, input tray and output tray. 
3. Pull the scanner cover release to open the scanner. Remove the foam strip from the inside of 
the scanner. Leave the cover open so you can attach the input tray. 

Xerox® DocuMate® 4760 Scanner Setup
10User Guide
4. Insert the short pins on each side of the input tray into the holes on the scanner. Close the 
cover when you are done.
5. Insert the short pins on each side of the output tray into the holes on the scanner. 

Scanner Setup Xerox® DocuMate® 4760
User Guide11
Connect the Scanner Power Cord
Only use the power supply (HEG42-240200-7L made by HiTron or DA-48M24 made by APD) 
included with your scanner. Connecting any other type of power supply may damage your 
scanner, and will void its warranty.
1. Plug the power supply into the power port on the scanner.
2. Plug the power cord into the power supply and into a wall outlet. 

Xerox® DocuMate® 4760 Scanner Setup
12User Guide 

User Guide13
Installation
Please make sure of the following before you begin installation:
• If you are prompted to reboot during installation, please select “No”. Finish installing the rest 
of the software, then close all open windows and reboot your computer. 
• The information in this guide may cover software not provided with the scanner you 
purchased. Please disregard any information about the software not applicable to your 
scanner.
• If your computer has AntiVirus or AntiSpyware software...

Xerox® DocuMate® 4760 Installation
14User Guide
2. Insert the installation disc into your computer’s DVD-ROM drive.
The disc automatically starts.
3. The Select Language window opens. Click the drop-down menu arrow and select the 
language to use. Click OK.
The disc’s Main menu window opens.
Note: If the disc does not start, check the following:
– Make sure the disc drives door is completely shut.
– Make sure the disc was inserted in the drive in the proper direction (label side up).
To  l a u n c h  t h...

Installation Xerox® DocuMate® 4760
User Guide15
4. On the Main menu, select Install software.
5. Make sure the boxes for Scanner Driver and Visioneer OneTouch are selected, as well as any 
other applications you want to install.
Note: The software provided with your scanner may differ slightly from the list shown in the 
window.
6. Click Install now.