Xerox ColorQube 8570DT User Manual

							Safety
ColorQube 8570/8870 Color Printer
User Guide11
The power cord is attached to the printer as a plug-in device at the right rear corner of the printer. If it 
is necessary to disconnect all electrical power from the printer, disconnect the power cord from the 
electrical outlet.
Note:Leave the printer on for optimum performance and to preserve ink; it does not pose a safety 
hazard.
See also: 
Electrical Specifications on page 182
Power Saver Settings on page 48
Downloaded From ManualsPrinter.com Manuals 
						

							Safety
ColorQube 8570/8870 Color Printer
User Guide 12
Operational Safety
This section includes:
•Printer Location on page 12
•Operational Guidelines on page 12
•Printer Supplies on page 13
Your printer and supplies were designed and tested to meet strict safety requirements. These include 
safety agency examination, approval, and compliance with established environmental standards.
Your attention to the following safety guidelines helps to ensure the continued, safe operation of your 
printer.
Printer Location
• Do not block or cover the slots or openings on the printer. These openings are provided for 
ventilation and to prevent overheating of the printer.
• Place the printer where there is adequate space for operation and servicing. For details, see 
Clearance Requirements on page 180.
• Place the printer in a dust-free area.
• Do not store or operate the printer in an extremely hot, cold, or humid environment. For optimum 
performance environmental specifications, see Environmental Specifications on page 181.
• Place the printer on a level, solid, non-vibrating surface with adequate strength to hold the weight 
of the printer. The base printer weight, without any packaging materials, is approximately 27.4 kg 
(60.5 lb.).
• Do not place the printer near a heat source.
• Do not place the printer where it is directly exposed to the cold air flow from an air conditioning 
system.
• Place the printer in an area within a temperature range of 10°–32°C / 50°–90°F and a relative 
humidity range of 10–80% non-condensing.
Operational Guidelines
• Do not open or remove the paper source tray that you selected in either the printer driver or 
control panel while the printer is printing.
• Do not open the doors while the printer is printing.
• Do not move the printer while it is printing.
• Do not move the printer while the ink is still hot; wait 30 minutes for the printer to cool down after 
shutting down using the shutdown sequence. For details, see Precautions for Moving the Printer on 
page 137.
• Keep hands, hair, neckties, etc., away from the exit and feed rollers.
• Use the printer at elevations below 2480 m (8,000 ft.)
Downloaded From ManualsPrinter.com Manuals 
						

							Safety
ColorQube 8570/8870 Color Printer
User Guide13
Printer Supplies
• Use the supplies specifically designed for your printer. The use of unsuitable materials may cause 
poor performance and a possible safety hazard.
• Follow all warnings and instructions marked on, or supplied with, the printer, options, and supplies.
CAUTION:Use of non-Xerox supplies is not recommended. The Xerox Warranty, service 
agreements, and Total Satisfaction Guarantee do not cover damage, malfunction, or degradation 
of performance caused by use of non-Xerox supplies, or the use of Xerox supplies not specified for 
this printer. The Total Satisfaction Guarantee is available in the United States and Canada. 
Coverage may vary outside these areas; please contact your local representative for details.
See also: 
Ordering Supplies on page 134
Downloaded From ManualsPrinter.com Manuals 
						

							Safety
ColorQube 8570/8870 Color Printer
User Guide 14
Maintenance Safety
• Do not attempt any maintenance procedure that is not specifically described in the 
documentation supplied with your printer.
• Do not use aerosol cleaners. Clean the printer with a dry, lint-free cloth only unless otherwise 
specified.
• Do not burn any consumables or routine maintenance items. For information on Xerox supplies 
recycling programs, go to:
• ColorQube 8570 printer: www.xerox.com/gwa
• ColorQube 8870 printer: www.xerox.com/gwa
See also: 
Maintenance and Cleaning on page 120
Downloaded From ManualsPrinter.com Manuals 
						

							Safety
ColorQube 8570/8870 Color Printer
User Guide15
Printer Symbols
SymbolDescription
Warning or Caution:
Ignoring this warning could cause serious injury or even death.
Ignoring this caution could cause injury or damage to the property.
Hot surface on or in the printer. Use caution to avoid personal injury.
Avoid pinching fingers in the printer. Use caution to avoid personal injury.
Allow 30 minutes for the printer to cool down before moving or packing it.
00:30
Downloaded From ManualsPrinter.com Manuals 
						

							Safety
ColorQube 8570/8870 Color Printer
User Guide 16
Downloaded From ManualsPrinter.com Manuals 
						

							ColorQube 8570/8870 Color Printer
User Guide17
2Fe a t u r e s
This chapter includes:
•Parts of the Printer on page 18
•Printer Configurations and Options on page 21
•Information Pages on page 23
•More Information on page 26
Downloaded From ManualsPrinter.com Manuals 
						

							Fe a t u r e s
ColorQube 8570/8870 Color Printer
User Guide 18
Parts of the Printer
This section includes:
•Right-Front View on page 18
•Right-Side View on page 19
•Rear View on page 19
•Control Panel on page 20
Right-Front View
View shows the ColorQube 8570/8870 printer with all three optional feeder trays.
1. Optional 525-Sheet Feeder (Tray 5)
2. Optional 525-Sheet Feeder (Tray 4)
3. Optional 525-Sheet Feeder (Tray 3)
4. Standard 525-Sheet Tray 2
5. Tray 1, 100-Sheet max. capacity
6. Control panel
7. Exit door release8. Front door release
9. Exit door B
10. Ink loader door C
11. Legal/A4 output tray extension
12. Interface (I/O) door E
13. Side door D
14. Front door A
8X70-044
2
1
3
4
5
8101197
6
1312
14
Downloaded From ManualsPrinter.com Manuals 
						

							Fe a t u r e s
ColorQube 8570/8870 Color Printer
User Guide19
Right-Side View
Rear View
1. Maintenance kit
2. Waste tray
3. Power cord connection
4. Power switch
5. USB connection
6. Configuration card
7. Ethernet 10Base-T/100/1000Base-TX 
connection
1. Optional hard drive
2. Two RAM slots
8X70-045
1
234
5
6
7
8X70-046
1
2
Downloaded From ManualsPrinter.com Manuals 
						

							Fe a t u r e s
ColorQube 8570/8870 Color Printer
User Guide 20
Control Panel
The control panel displays the printer’s operating status, for example, Warming up, Ready to Print, 
Printing, etc., printer errors and warnings, and prompts you to load paper, order and replace supplies, 
and clear jams. From the control panel, you access tools and information pages to help resolve 
problems, and to change printer and network settings.
1.Status indicator light:
Green: Printer is ready to print.
Yellow: Warning condition; printer continues to 
print.
Red: Startup sequence or error condition.
Blinking Green: Printer is busy or warming up.
2.Graphic display: Upper part displays status 
messages and, for menus, the menu title. Lower 
part displays menus and menu options.
3.Cancel button:
Cancels the current print job.
4.Back button:
Returns to the previous menu item.
5.Up Arrow button:
Scrolls upward through the menus.6.Down Arrow button:
Scrolls downward through the menus.
7.OK button:
Accepts the selected setting.
8.Help (?) button:
Displays a help message with information about 
the printer, such as printer status, error messages, 
and maintenance information. Also describes 
control panel menu items.
9.Power Saver button/indicator light:
Brings the printer out of, or puts the printer into, 
Power Saver mode.
On steady: Printer can be put in Power Saver 
mode at this time.
Off: Printer cannot be put in Power Saver mode 
at this time.
Blinking: Printer is in Power Saver mode.
8X70-048
READY TO PRINTWalk-Up Features
Information
Paper Tray Setup
Printer Setup
Troubleshooting
1
23
4
5
68
79
Downloaded From ManualsPrinter.com Manuals