Xerox 1632 2240 3535 Color Carrera Manual

6/02
6-7 DC1632/2240
dC118, dC120
General Procedures and Information Prelaunch Training/Review
dC118 Jam CounterPurposeDisplays the number of occurrences of Jams from time of previous Complete Closeout on ser-
vice exit until present.
NOTE: This procedure does not count jams detected while in the Service Mode.Procedure1. Enter the Diagnostic Mode. Refer to Entering Diagnostic Mode using the PWS.
2. Select Maintenance on the Service Entry Screen.  
3. Select the Jam Counters (dC 118).
4. The screen...

6/02
6-8DC1632/2240
dC122, dC129
Prelaunch Training/Review General Procedures and Information
dC122 Shutdown HistoryPurposeTo display the Last 40 Faults (History). 
NOTE: 
1.  fault detected while in Service Mode are not counted.
2.  An Interlock open while the machine is stopped is not counted.
3. If multiple faults occurred in the machine, the primary fault is recorded. Procedure1. Enter the Diagnostic Mode. Refer to Entering Diagnostic Mode using the PWS.
2. Select the Diagnostics Tab.
3. Select the...

6/02
6-9 DC1632/2240
dC131
General Procedures and Information Prelaunch Training/Review
dC131 NVM Read/WritePurposeReads, sets or changes the NVM data.ProcedureModule Selection
1. Enter the Diagnostic Mode. Refer to Entering Diagnostic Mode using the PWS.
2. Select Adjustments in the Service Entry Screen.
3. The system displays one of the Read/Write Screens. dC131 NVM Read/Write is the
default screen.
4. Select a Sub-System from the Vertical Left Tab List. The default tab is All.
Reading NVM
1. Select an...

6/02
6-10DC1632/2240 Prelaunch Training/Review General Procedures and Information
dC131 NVM Tables 700-xxx ESS Configuration NVM List
Table 1 Chain 700
Chain-Link Name Default Range Description
700-006 Configuration - 0x00~0x08 [P, SP, CSP, CFSP] Set up at factory production. It allocates bits in the following  P(rinter), F(ax), C(opy), S(can). 
P = 0x01, F = 0x02, C = 0x04, S = 0x08.
700-073 Page Memory Size - 64*1024*102
4~256*1024*
1024bytes (Auto Setting)
700-075 ART User Buffer Size 32KB...

6/02
6-11 DC1632/2240General Procedures and Information Prelaunch Training/Review 700-132 Operation Panel OK Beep 2 0~3 0 =  Off, 1 =  Low volume, 2 =  Medium volume, 3 =  High volume
700-133 Operation Panel NG Beep 2 0~3 0 =  Off, 1 =  Low volume, 2 =  Medium volume, 3 =  High volume
700-134 Job Complete Beep with Copy 2 0~3 0 =  Off, 1 =  Low volume, 2 =  Medium volume, 3 =  High volume
700-135 Job Complete Beep without Copy 2 0~3 0 =  Off, 1 =  Low volume, 2 =  Medium volume, 3 =  High volume
700-136...

6/02
6-12DC1632/2240 Prelaunch Training/Review General Procedures and Information700-309 SEEPROM Serial# (9th digit) - - Alphanumerics (ASCII)
700-310 SEEPROM Serial# (10th digit) - - Alphanumerics (ASCII)
700-311 Battery Backup SRAM Serial # (1st 
digit)- - Alphanumerics (ASCII)
700-312 Battery Backup SRAM Serial # (2nd 
digit)- - Alphanumerics (ASCII)
700-313 Battery Backup SRAM Serial # (3rd 
digit)- - Alphanumerics (ASCII)
700-314 Battery Backup SRAM Serial # (4th 
digit)- - Alphanumerics (ASCII)...

6/02
6-13 DC1632/2240General Procedures and Information Prelaunch Training/Review
710-xxx DADF NVM List
700-337 Configuration (info. On SEEPROM) - - [P, SP, CSP, CFSP (C)] Set at factory.  It allocates bits in the following into P(rinter), F(ax), C(opy), S(can) 
respectively and display it in that disjunction. P = 0x01, F = 0x02, C = 0x04, S = 0x08
700-338 Territory (SEEPROM) - 1~4 1=FX, 2=XC, 3=XE, 4=AP
700-339 IOT ROM Major version - - (Auto Setting)
700-340 IOT ROM Minor version - - (Auto Setting)...

6/02
6-14DC1632/2240 Prelaunch Training/Review General Procedures and Information710-006 DupMode RegiSensor On to Belt Mot. 
Slowdown Step (Non CVT Mode)44 19~69 [Description] = No. of Steps after the Regi Sensor turned On and until the Belt Motor started to reduce speed in 
the Non CVT Mode (Reverse & Reverse Output Loop) Regi Roll Loop Adjustment Value at Reverse & Reverse 
Output =  4 +/-5mm
710-012 8.5x11LEF Threshold 2093 1993~2193 Threshold to separated the size detection of 8.5x11LEF and 8x10LEF....

6/02
6-15 DC1632/2240General Procedures and Information Prelaunch Training/Review
715-xxx IIT NVM List
710-812 ADF RegiSNR Off NonInvert Dynamic-
Jam Count Total0 0~65535 Cumulative Jam Counter (Write not permitted)
710-813 ADF Regi SNR Off Dynamic Jam Count 
Since Reset0 0~65535 Cumulative Jam Counter at the previous clearing (Write not permitted)
710-814 ADF Regi SNR On Dynamic Jam Count 
Total (invert)0 0~65535 Cumulative Jam Counter (Write not permitted)
710-815 ADF RegiSNROn DynamicJamCount 
Since...

6/02
6-16DC1632/2240 Prelaunch Training/Review General Procedures and Information715-083 Pshad (4) 65 0~127 Red W-Ref Correction Coefficient P Paper  Adjustment at factory.
715-084 Pshad (5) 72 0~127 Green W-Ref Correction Coefficient P Paper  Adjustment at factory.
715-085 Pshad (6) 69 0~127 Blue W-Ref Correction Coefficient P Paper  Adjustment at factory.
715-113 A6/Postcard Detection 0 0~1 0 =  A6 Document, 1 =  Postcard Document (XC  0 =  Postcard, 1 =  A6)
715-114 A4S/8.5in Detection 1 0 0~1 0 =  A4...