Wolf Projector SDC-18 Specifications

							   SDC-181080p LED Cinema Projector
SDC-18 Features
•  
Advanced next-generation 1920 
x 1080 [HD] DLP® light engine
•   
“Lamp-less” LED technology 
achieves ~20% expanded color 
gamut and extremely accurate 
color tracking
•   1,000 ANSI peak white  
[calibrated], 500,000:1 native 
CR performance
•  Emitter life: 20,000 hours  
[normal mode]
•  E-VariScope™ for 2.35:1  
viewing on constant height 
screens [no anamorphic  
lens required]
•  Short throw primary optics 
[1.25-1.55:1] with H+V  
lens shift
•  Extensive CMS  
[Color management software]
•  Projector boasts dual HDMI 1.4a 
inputs, Component, Composite 
and PC inputs
•  ProScaler MK III features  
dual HDMI 1.4a inputs,  
1 HDMI 1.4a output
•  
Two optional VariScope™ FX™ 
[fixed] anamorphic lens kits
•   RS-232 connectivity for home 
automation systems
•  Ultra-quiet chassis design – 
~24dB SPL @ 1 meter  
[normal mode]
•  Optional RF-based 3D emitter  
and active shutter LCD 3D glasses  
•  Optional ceiling bracket –  
model WC-PM-MS
SDC-18 “3D” LED Home Theater Projection System
Introducing Wolf Cinema’s next-generation 2D/3D “lamp-less” home theater ensemble –  
the model SDC-18. 
Sharing many of the attributes of our flagship LED ensemble, the more affordable SDC-18 
features precision short-throw optics to deliver razor sharp images via its single 1920 x 1080 
(1080p) DLP® chip set from Texas Instruments. But unlike most other single-chip projection  
platforms, the SDC-18 eliminates the traditional UHP lamp and color wheel: this system 
produces an image via three separate RGB (red, green, blue) high-current light emitting diodes 
(LEDs). These LED emitter panels are superbly efficient light sources, with an extremely wide 
color gamut that exceeds today’s HD standards by 20%. There’s no color wheel involved and 
thus no visible “rainbow” artifacts or light flicker. And this technology’s exceptional black level 
performance [rated at greater than 500,000:1 native CR] brings forth tremendous image detail 
and enhanced depth of field, rendering the very finest and subtle shadow details with ease.  
This exciting solution is delivered with our latest ProScaler MK III video processor – a  
rack-mountable high performance video processor/scaler that provides for total control of  
all imaging parameters, calibration accuracy and integration flexibility. The ProScaler MK III 
boasts advanced multi-point CMS calibration capabilities, comprehensive noise reduction  
algorithms, edge enhancement /detail processing and much more. The SDC-18 short throw 
optics will facilitate extremely close placement to the theater screen [1.25-1.55:1 TD factor], 
while incorporating our remarkable E-VariScope™ technique for viewing on constant height  
CinemaScope® 2.35/2.40:1 screens – without the need for an anamorphic lens [ yet the system 
remains fully compatible with external anamorphic lenses, as required or may be desired].
Most important, the SDC-18’s remarkable LED engine is  rated to deliver accurate light output 
for approximately 20,000 hours of continuous use in normal mode, facilitating years of viewing 
excellence without ever having to endure a fading image, or change out a projector lamp!
 The SDC-18 is yet another exciting high-performance home cinema projection solution from 
Wolf Cinema.   
						

							 SDC-18
Specifications
SDC-18 Projector
Display Technology Advanced HD 1080p (1920 x 1080), DLP® imaging technology by Texas Instruments
Brightness                              1000 ANSI lumens (calibrated)
Contrast Ratio  500,000:1 
Motorized Zoom Lens 1.25-1.55:1 HD Lens
Lens Offsets Vertical: +/- 60%, Horizontal: +/-10%
Lamp technology Three RGB LED emission panels
Emitter Lifespan 20,000 hours (typical, normal mode)
Noise Levels 24 dB (normal mode)
Video Inputs Primary Inputs: HDMI x 2 (1.4a 2D/3D), PC (1), Component (1), Composite (1)
Signals  NTSC M/J, 3.58MHz, 4.43MHz PAL B/D/G/H/I/M/N, 4.43MHz SECAM B/D/G/K/K1/L, 4.25/4.4MHz, 480i/p, 576i/p, 
720p (50/60Hz), 1080i (50/60Hz), 1080p (50/60Hz)
Control IR; RS-232 (serial input – Dsub-9)
Outputs 12V triggers (2), 3D Sync (1)
Power Requirements AC 110V-220V 50/60Hz
Power Consumption 245W (standby