Wolf Cinema Projector Sdc 6 Specifications

							 NEW  PRODUCT  ANNOUNCMENT September, 2013
 SDC-6
Wolf Cinema 2D/3D Home Cinema Ensemble
Wolf Cinema proudly presents our “top value” home cinema projection ensemble, at a truly breakthrough price – the SDC-6 
system, featuring our latest projector and outboard rack-mountable ProScaler MK III video processor!
 
This exciting new home cinema combination – at an unheard of $6,0000 North American Retail Price for the package – boasts 
all the imaging excellence, features and control capabilities you’ve come to expect from Wolf Cinema… yet in an extremely 
competitive ensemble compared with those two or three times the price. The SDC-6 projector head boasts all the features 
commonly desired by enthusiasts around the world, including full 1080p performance from a next-generation TI DLP
® chip set, 
advanced Wolf Cinema video processing, hand-calibrated color gamut and gamma curves, dynamic black level performance 
[15,000:1 CR] and much more. The 3500 ANSI lumens performance brightens up theater screens of all sizes, producing 
sufficient output for viewing even in high ambient light conditions, and on dedicated theater screens up to 14-ft in width. 
 
Incredible 2D and 3D [stereoscopic] viewing is fully enabled by the SDC-6 system, with the optional 3D emitter and LCD shutter 
glasses [sold separately]. The generous optical throw range [1.5-1.8:1] facilitates easy placement in any home theater environment, 
while the extended connectivity suite enables seamless integration to a wide range of advanced home control systems. 
 
The new slim-line Wolf Cinema ProScaler MK III processor serves as the connectivity and advanced signal processing point for 
your entire AV system. The ProScaler MK III features dual HDMI 1.4a inputs and a single HDMI 1.4a output for connecting to the 
SDC-6 projector head. The ProScaler’s advanced calibration suite will enable professionals and enthusiasts everywhere to achieve 
near-perfect color accuracy and ultra-wide contrast levels in all viewing modes. Standard definition sources [such as from DVDs 
and television broadcasts] are up-converted to 1080p and displayed with improved visual depth, dimension, and reality. Per-pixel 
video de-interlacing, 10 bit video processing, MPEG mosquito / temporal and block artifact noise reduction provide vas\
t improvements 
on marginal HD and SD sources. Most important, multiple calibration memories per video input enable you to save and recall key 
system configurations at the touch of a button.
The ProScaler MK III also boasts our latest technology development known as E-VariScope™: multiple viewing modes that allow 
you to enjoy popular TV and film content on constant height, 2.35:1 wide aspect ratio screens. You’ll have near-instant access 
to preferred aspect ratios – for example, 1.33:1 [4/3], 1.78:1 [16/9], 1.85:1, 2.35:1 and more – and all without the need for  
						

							Wolf Cinema
2431 Fifth St. Berkeley . CA 94710 
Tel: 510.843.4500 . Fax: 510.843.7120
www.wolfcinema.com
© 2013 Wolf Cinema
an external anamorphic lens [yet full anamorphic lens support is also provided]. E-VariScope brings you that immersive 2:35:1 
CinemaScope™ widescreen experience while eliminating those unwanted top & bottom “black bars,” as commonly experienced 
on smaller-width 16/9 screens.
 
The Wolf Cinema SDC-6 system will become available starting in November 2013, at a North American Suggested Retail Price  
of just $6,000.00.
Wolf Cinema SDC-6 Home Cinema Projector 
Key Features and Specifications:
•	 Latest-generation	single	0.65” 	DLP
®	Technology	by	 Texas	Instruments™
•	 Full	HD	1920	x	1080	[1080p]	resolution
•	 3,500	 ANSI	lumens	–	suitable	with	screens	up	to	14-feet	in	width
•	 Lamp	type	and	life	–	240W	UHP, 	approximately	6000	hours	[eco	mode], 	1500-2000	[bright]
•	 Short	throw	primary	optics	–	1.5-1.8:1
•	 Manual	focus	and	zoom, 	keystone	correction	+/-	40	degrees	vertical
•	 ProScaler	MK	III	 Video	inputs	–	2	HDMI	[SD/HD	1.4a], 	one	HDMI	1.4a	video	output
•	 Advanced	10-bit	 Wolf	Cinema	processing, 	multiple	configuration	memories	per	input
•	 E-VariScope™	for	2.35:1	viewing	on	constant	height	screens	[no	anamorphic	lens	required]
•	 Two	optional	 VariScope	FX	anamorphic	lens	packages	available	[full	anamorphic	lens	support	is	provided]
•	 IR	remote	control	plus	RS-232	connectivity	with	today’s	leading	home	automation	systems
•	 Optional	IR	emitter	and	active	LCD	3D	shutter	glasses
•	 Dimensions	[W	x	D	x	H], 	projector	body	–	12.8”	x	9.2”	x	3.8”	[324	x	234	x	97	mm]
•	 Projector	weight	–	6.8	lb	[3.1	kg]
•	 SPL	levels	(standard)	–	26dB
•	 Power	Supply	–	 AC	Input	100–240V,	50–60Hz,	auto-switching
•	 Power	Consumption	–	297W	max	(bright), 	241W	(standard),