Wolf Cinema Projector REF-700 User Manual
Here you can view all the pages of manual Wolf Cinema Projector REF-700 User Manual. The Wolf Cinema manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 111
111 IR Emitter/3D Passive Filter Systems: In response to an incoming sync signal, the emitter emits L/R infrared signals to a receiver in active 3D shutter glasses, causing the L/R shutters to alternately open and close for active stereo 3D applications. Likewise, a 3D passive filter system placed in front of the lens responds to an incoming sync signal and alternately polarizes the L/R frames viewed with passive glasses for active stereo 3D applications. Connecting one of the 3D Stereo Sync Cable...
Page 112
112 3D Mode: Select the mode of your 3D operation. Off: 3D operation is disabled. Auto 3D: Attempts to automatically determine which 3D mode to use based on auxiliary video data, e.g. HDMI info frame. Native 3D: All content is shown at a native frame rate of 96 ‐ 120 Hz input and output. Frame Doubled 3D: 3D Content from a single 48‐60Hz signal (24/30Hz per eye) is displayed twice to provide a 3D content to be viewed at 96‐120Hz. Dual Input 3D: Content from two independent 48‐60Hz ‘passive’...
Page 113
113 3D Sync Output: This option defines whether the 3D Sync is output and controls how it is processed. It is only valid when an optional cable is used to connect stereo 3D signals to the projector via the GPIO port. When there is no 3D signal, Sync Output should be 'Off'. Typically only the last projector in the 3D Stereo cable chain is connected to the emitter and should specify 'To Emitter'. All other projectors should select 'To Next Input' if other projectors are used in...
Page 114
114 Display 3D Message Boxes: Enable/Disable message boxes that are triggered by 3D setup. NOTE: No message box is shown in “Off” and “Valid” state.
Page 115
115