Home > Windmere > Fan > Windmere 9 23 CM DELUXE OSCILLATING DF91M Series User Manual

Windmere 9 23 CM DELUXE OSCILLATING DF91M Series User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Windmere 9 23 CM DELUXE OSCILLATING DF91M Series User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 154 Windmere manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							SAVE THIS USE AND CARE BOOK
    9 (23 CM) DELUXE
    OSCILLATING DESK FAN 
    WITH MESH GRILLES
    IMPORTANT SAFEGUARDS
    When using electrical appliances, basic safety precautions should
    always be followed, including the following:
    nREAD ALL INSTRUCTIONS BEFORE USING.
    nUse fan only for intended use, as described in instruction manual.
    nTo protect against electrical shock, do not immerse unit, plug, 
    or cord in water or spray with liquids.
    nClose supervision is necessary when any appliance is used by 
    or near children.
    nUnplug from outlet when not in use, when moving fan from one 
    location to another, before putting on or taking off parts and 
    before cleaning.
    nNever insert fingers, pencils or any other objects through the 
    grille when fan is running.
    nDisconnect fan before cleaning.
    nMake sure fan is on a stable surface when operating to avoid 
    chance of overturning.
    nDo not use fan in a window. Rain may cause an electrical hazard.
    nDo not operate in the presence of explosive and/or flammable 
    fumes.
    nDo not place fan or any parts near an open flame, cooking 
    or other heating appliances.
    nDo not operate any appliance with a damaged cord or plug, after 
    the appliance malfunctions or has been 
    dropped or damaged in any manner.
    nDo not let cord hang over table or counter or touch hot surfaces.nTo disconnect, grip plug and pull from wall outlet. Never yank 
    on cord.
    nAlways use on a dry surface.
    nThis product is intended for household use only and not for 
    commercial or industrial use.
    nDo not use fan near curtains, plants, window treatments, etc.
    WARNING: To reduce the risk of fire or electrical shock, do not
    use this fan with any solid-state speed control device.
    SAVE THESE INSTRUCTIONS
    Printed in Hong Kong2000/10-19-104 DF-91M
    DF91MBS
    PUB No.175954-01
    OPERATING INSTRUCTIONPRODUCT MAY VARY SLIGHTLY FROM ILLUSTRATION
    HOW TO USE
    CARE AND CLEANING
    If the supply cord is damaged, it must be replaced by the
    manufacturer or its service agent or a similarly qualified person in
    order to avoid a hazard.
    This appliance is for household use and may be plugged into a 230V
    AC electrical outlet (ordinary household current).
    ASSEMBLY INSTRUCTIONS
    1. Place fan base on firm, stable surface such as a table or 
    countertop.
    2. Mount the rear grille to the motor housing by matching the round 
    holes in the rear grille (one at the top, one at the bottom) to the 
    round pins on the front of the motor housing. Push in firmly until 
    the pins protrude through the holes.
    3. Secure the rear grille to the motor housing by placing the plastic 
    collar over the thread hub around the motor shaft and turning 
    collar clockwise to tighten.
    4. Push blade into the shaft pin firmly in place until it cannot be 
    pulled out. LINE CORD SAFETY TIPS
    1. Never pull or yank on the cord or the appliance.
    2. To insert plug, grasp it firmly and guide it into outlet.
    3. To disconnect appliance, grasp plug and remove it from outlet.
    4. Before each use, inspect the line cord for cuts and/or abrasion 
    marks. If any are found, this indicates that the appliance should 
    be serviced and the line cord replaced. Please return it to our 
    Service Department or to an authorized service representative. 
    5. Never wrap the cord tightly around the appliance, as this could 
    place undue stress on the cord where it enters the appliance 
    and cause it to fray and break.
    DO NOT OPERATE APPLIANCE IF THE LINE CORD SHOWS ANY
    DAMAGE, OR IF APPLIANCE WORKS INTERMITTENTLY OR STOPS
    WORKING ENTIRELY.
    IMPORTANT:
    During the first few minutes of initial use, a slight odor may be
    noticeable. This is normal and will quickly disappear.
    This appliance requires little maintenance and contains no user
    serviceable parts. Do not try to fix it yourself. Refer it to qualified
    service personnel if servicing is needed.
    The fan is permanently lubricated and will not require additional
    lubrication for the life of the fan.
    TO CLEAN:Before cleaning, turn fan off and unplug from electrical
    outlet. Wipe off excess dust with a lint-free cloth. To ensure
    adequate air circulation to the motor, keep vents located at the rear
    of the motor housing free from dust accumulation. A vacuum
    cleaner hose can be used to clean these vents. Do not immerse fan
    in water or any other liquid.Disassemble grilles and blade. Grilles
    and blade may be cleaned with mild soap and water. Use a soft,
    slightly damp cloth to wipe the remaining fan parts. Do not allow
    water or any other liquid to get into the motor housing or base.
    Reassemble fan after grilles and blade have dried completely. Do
    not plug fan into electrical outlet until it has been fully reassembled.
    TO STORE:Make sure to disassemble and clean the fan before
    storing. Retain the original packaging for the purpose of storing the
    fan. Always store fan in a dry place. Never store it while it is still
    plugged in.Never wrap the cord tightly around the fan,and do not
    put any stress on the cord where it enters the fan housing, as it
    could cause the cord to fray and break.5. Please refer to the enclosed instruction sheet for details on how 
    to assemble the front grille.
    OPERATING INSTRUCTIONS
    1. Place the fan on a safe, flat surface where it cannot fall or be 
    pulled by the cord.
    2. Before plugging in, adjust the direction of the airflow by firmly 
    holding the base with one hand and pushing the fan grille back 
    to tilt up or by pushing it forward to tilt down.
    3. To make the fan oscillate, push down on the oscillating knob 
    located on the top of the motor housing. To stop the fan from 
    oscillating, pull up on the oscillation knob.
    4. Plug fan into an electrical outlet.
    5. Choose speed desired by depressing one of the buttons.
    1
    23
    4 5 6 7
    8
    1. Carrying Handle (not shown)
    2. Oscillation Knob located on back of fan, on top of motor housing
    3. Base
    4. Rubber Feet
    5. Push-Button Switches
    6. Tabs
    7. Safety Grilles
    8. Fan Blades
    Power Supply Cord (not shown)
    2000_10_19_104_HE  1/9/01  2:09 PM  Page 2 
    						
    All Windmere manuals Comments (0)

    Related Manuals for Windmere 9 23 CM DELUXE OSCILLATING DF91M Series User Manual