Winchester 1886 Take Down Suplementary Manual
Here you can view all the pages of manual Winchester 1886 Take Down Suplementary Manual. The Winchester manuals for Firearms are available online for free. You can easily download all the documents as PDF.
Page 1
Licensee U.S. REPEATING ARMS COMPANY, INC. 344 Winchester Avenue New Haven, CT, U.S.A. 06511-1970 www.winchester-guns.com These are special instructions for the Winchester Model 1886 Takedown version only. These instructions must be used in conjunction with the instructions in the full Model 1886 OwnerÕs Manual. If your manual is missing please contact U.S. Repeating Arms immediately to obtain a new manual free of charge. Phone numbers and addresses are contained inside this manual. IMPORTANT...
Page 2
SPECIAL WARNINGS FOR THETAKE-DOWNMODEL1886 IT IS ESSENTIAL THAT THESE OPERATING INSTRUCTIONS AND THE INSTRUCTIONS / WARNINGSPROVIDED IN THE MODEL 1886 OWNERÕS MANUAL BE THOROUGHLY STUDIED BEFORE USING THIS FIREARM TO ASSURE PROPER AND SAFE GUN HANDLING. FAILURE TO FOLLOW THESE INSTRUCTIONS OR FAILURE TO OBEY ANY SAFETY WARNING MAY RESULT IN INJURY TO YOURSELF OR OTHERS, OR CAUSE DAMAGE TO YOUR GUN. IF YOUR MODEL 1886 OWNERÕS MANUAL IS MISSING YOU MUST OBTAIN ONE FROM YOUR DEALER OR US BEFORE USING...
Page 3
DISCHARGING FIREARMS IN POORLY VENTILATED AREAS, CLEANING FIREARMS, OR HANDLING AMMUNITION MAY RESULT IN EXPOSURE TO LEAD AND OTHER SUBSTANCES KNOWN TO CAUSE BIRTH DEFECTS, REPRODUCTIVE HARM AND OTHER SERIOUS PHYSICAL INJURY. HAVE ADEQUATE VENTILATION AT ALL TIMES. WASH HANDS THOROUGHLY AFTER EXPOSURE. GENERALDESCRIPTION Your new Model 1886 has unique features found only on the takedown model. The primary difference is the addition of a mechanism that allows you to separate the barrel/forearm half of...
Page 4
TAKEDOWNPROCEDURE When your rifle is fully assembled use this procedure to take it down into its two parts. COMPLETELY UNLOAD YOUR RIFLE BY REMOVING ALL CARTRIDGES FROM THE MAGAZINE, CHAMBER AND FEED AREAS AS EXPLAINED IN YOUR MODEL 1886 MANUAL. MAKE SURE YOUR RIFLE IS POINTED IN A SAFE DIRECTION. TAKING DOWN YOUR RIFLE WITH A CARTRIDGE IN THE MAGAZINE IS NOT ONLY DANGEROUS, IT WILL ALSO PREVENT DISASSEMBLY. PLACE THE SAFETY IN THE ÒON SAFEÓ POSITION. PLACE YOUR RIFLE OVER A PADDED SURFACE ON A TABLE,...
Page 5
1. Open the bolt completely by working the finger lever downward and fully forward as explained in your Model 1886 ownerÕs manual. The barrel will not separate from the receiver unless the action is opened. Failure to do this can damage bolt components if you attempt to remove the barrel by force with the bolt is closed. 2. Open the takedown lever on the end of the magazine tube by lifting it fully outward, away from the magazine (see Figure 3). 3. Looking from the muzzle end of the rifle, rotate the...
Page 6
WARNING: IF THE BARREL SECTION WILL NOT TURN WITH RESPECT TO THE RECEIVER DO NOT APPLY EXTRA FORCE UNTIL YOU CHECK AGAIN TO MAKE SURE YOU HAVE FIRST OPENED THE ACTION AND THAT THE TAKEDOWN LEVER ON THE END OF THE MAGAZINE HAS BEEN SUFFICIENTLY TURNED TO DISENGAGE THE MAGAZINE TUBE AND FOLLOWER FROM THE RECEIVER. APPLYING UNDUE FORCE WITH THE BOLT STILL LOCKED IN THE ACTION COULD DAMAGE THE ACTION. (If the two halves will not turn with respect to each other as explained, also loosen the release lever...
Page 7
6. With the barrel extension inserted, turn the barrel counterclockwise 90û to tighten the connection (see Figure 9). Very little force should be required to turn the barrel assembly into its proper position. WARNING: IF THE BARREL SECTION WILL NOT TURN WITH RESPECT TO THE RECEIVER DO NOT APPLY EXTRA FORCE UNTIL YOU CHECK AGAIN TO MAKE SURE YOU HAVE FIRST OPENED THE ACTION FULLY AND THAT THE MAGAZINE TUBE AND FOLLOWER ARE FULLY RETRACTED. APPLYING FORCE WITH THE BOLT STILL CLOSED IN THE ACTION COULD...
Page 8
slightly off-center with respect to the bottom of the magazine tube when fully tightened. This is not a prob- lem. Simply rotate it into alignment. Your rifle is now fully reassembled. ORDERINGPARTS To order parts, please write our parts department and furnish the following: your name, address, and tele- phone number. Also specify the model and serial num- ber of your gun. When we receive your request, we will send an order form and a parts breakdown with prices. Write to: Parts Department U.S....