Nintendo Wii Model No Rvl 001 Operations Manual

Wii Remote with
Wii MotionPlus
installed
1819
System Setup
System Setup
System Setup
WARNING - Battery Leakage
TV and Audio/Video Settings
After you have completed all steps of the setup procedure and are ready to 
use the Wii system, you will need to set the appropriate input select 
setting for your TV, VCR or other audio equipment.
1.  Turn ON the power for your TV and any audio equipment connected to your
  gameplay setup and the power on the Wii console.
2.  Select the correct input setting for your...

Hold down both 
release buttons
IMPORTANT:
Insert the minus  (–) end rst
The white arrow is visible 
when unlocked
Hold down both lock 
release buttons
Sensor unit
Angle the sensor unit so
that the jacket doesn’t catch on  the corners of the Wii Remote
Pull gently 
until you can  see the cord
Make sure the
wrist strap is pulled
completely through
Jacket Insert
the Wii
Remote all the way
20 21
System Setup
System Setup
    Installing Batteries (cont.)
1. Slide the lock switch on the
  back of the Wii...

Strap lock lever
Lever will click into place
Slide the switch up
Sensor unit
Jacket
Do not separate the sensor unit from 
the jacket. They must be used together  for proper operation of the accessory. When disconnecting the Wii Remote 
from Wii MotionPlus, or when replacing  the Wii Remote batteries, do not 
separate the jacket from the sensor unit.
The sensor unit must be used with the included jacket. Follow these guidelines to 
prevent damage to the Wii Remote, surrounding objects, or injury to other...

1P 2P 3P 4P
MORELESSBattery Life
24 25
System Setup
System Setup
System Setup
Synchronizing Your Wii Remote with the 
Wii Console
This procedure allows the remote to communicate with the console.
The Wii Remote included with your Wii system has been synchronized with 
the console at the factory. 
There are two different modes of synchronizing (syncing) a Wii Remote with
your console.
STANDARD MODE – The Standard Mode procedure is used when adding additional 
Wii Remotes to your system or if you want to...

For best operation, play 
directly in front of the TV. 
Recommended distance: 3’– 10’
(from Sensor Bar to Wii Remote)
26 27
Using Game Discs
Using Game Discs
Wii System Play Guidelines
Playing a Wii or Nintendo GameCube 
Game Disc
    Before Inserting a Disc
•  Turn ON the power for your TV and any audio equipment connected to your
  gameplay setup.
•  Select the correct input setting for your TV. (See page 18, TV and Audio/Video
  Settings.)
    Insert a Game Disc
Insert your Game Disc into the Game...

Wii Remote –
Vertical Position
Wii Remote and Classic Controller Pro (sold separately)
Wii Remote – Horizontal Position
Wii Remote and Nunchuk
2829
Using the Wii Remote
Using the Wii Remote
Using the Wii Remote
Wii Remote Congurations
Depending on the game, the way you hold and operate the remote will vary. You may need to hold the remote in either one or two hands. Read the instruction booklet for the 
game you are playing for information about what kind of gameplay control is required for that game....

3031
Using the Nunchuk
Using the Nunchuk
Using the Nunchuk
Setup and Use of the Nunchuk
Wii gameplay with the Wii Remote and Nunchuk can involve rapid or vigorous motion. Please use the wrist strap to prevent losing your grip on the remote and 
causing damage to the remote and surrounding objects, or injury to other people.
Be sure to install the Nunchuk as described. Use the connector hook on the Nunchuk plug with the wrist strap cord or connector cover cord to prevent the 
Nunchuk plug from becoming...

Press in
and up
3233
Using Nintendo GameCube Controllers
Using Nintendo GameCube Controllers
Nintendo GameCube
Controller
Using Nintendo GameCube™ Controllers
Setup of Nintendo GameCube Controllers
NOTE: When using GameCube Controllers with the Wii console, be sure and 
use the stand plate to help prevent the console from being tipped over by 
pulling on the controller cable. (See page 11, Vertical Placement.)
Optionally, the console can be placed horizontally. When using GameCube 
Controllers in the...

Note:Label faces
towards the Wii game disc slot
SD Card SDHC Card
miniSD Card
and Adapter microSD Card
and Adapter
Using Memory Cards
34
35
Using Memory Cards
    Using Nintendo GameCube Memory Cards
NOTE: Nintendo GameCube Memory Cards can only be used to save game 
information for Nintendo GameCube Game Discs.
To use a Nintendo GameCube Memory Card, open the slot cover and insert the 
memory card as shown below.
Note: Label faces
towards the top or right side of the Wii console.
Using Memory Cards...

     Wii Remote lights blink, but don’t stay lit (remote
     does not sync)
• Review the Sensor Bar setup instructions in this manual to ensure proper placement.
•  Make sure batteries are not depleted.
•  Try resetting the Wii Remote - remove the batteries, wait one minute, then replace
  the batteries. Wait a few seconds, and then try synchronizing the remote again.
•  If you are unable to re-sync the remote, try the following procedure:
  1. Turn off the power of the Wii console with the POWER Button...