Whirlpool Wp 79 Quick Reference Guide

GB -1-
   Chart
5019 396 03753
BEFORE USING THE APPLIANCE FOR THE FIRST TIME CAREFULLY READ THIS QUICK REFERENCE GUIDE AND THE ASSEMBLY INSTRUCTIONS!
THE CONTROL PANEL OF THIS DISHWASHER ACTIVATES PUSHING ANY BUTTON EXCEPT CANCEL/OFF BUTTON.
FOR ENERGY SAVING THE CONTROL PANEL DEACTIVATES AUTOMATICALLY AFTER 30 SECONDS IF NO CYCLE HAS STARTED.
PROGRAM SELECTION 
BUTTON
Push “P” button (repeatedly) 
until selected program number 
is shown on the display 
(P1...Px) - see “Table of 
programs” next page....

GB -2-
Chart
1) Program data obtained in conformity with European standard EN 50242, obtained under normal conditions (without additional options) and may vary 
depending on conditions. Differences of up to 20 minutes are possible with sensor programs as a result of the appliance’s automatic calibration system.
2) Reference program for energy label in compliance with EN 50242 regulations. - Note for Testing Institutes: for detailed information on the EN/Standard 
loading comparison test and other tests,...

GB -3-
First time use
1
410
9
23
5    78 6
1- salt reservoir
2- rinse aid dispenser
3- detergent dispenser
4- racks system
5,6,7,8- available functions on the panel
9- filters
10- spray armsWater hardness should be set 
only before the first wash or if 
water hardness has been 
changed
1
Visual indicator 
(depending 
on the model).
Unscrew cap.
Fill the salt reservoir with water 
before the first wash only.
(depending on the model)
The salt level indicator lamp may remain lit 
at the end of several wash...

GB -4-
Daily check
3
Daily useAdding detergent - Use only detergent specifically for dishwashers in accordance with the supplier’s recommendations
Open the cover A 
(press the dedicated button).
Only fill the detergent 
dispenser prior to 
starting a wash 
program.Shut the cover 
by pressing dedicated ribs.
If required, 
open the 
cover B 
(press the 
dedicated 
button).Add rinse 
aid to the 
max. line 
~150 mlThe rinse aid dosage can be 
adjusted to the detergent 
used. The lower the setting, 
the less...

GB -5-
How to load the racks
4Load cutlery with the handle into the pins.
Knives or cutlery with bulky handle can be
loaded with the head into the pins.
How to remove cutlery rack (if available) - It could be useful to remove 
cutlery rack to load stem glasses in upper rack.
- Open the two retainers (D) to take off the rack. 
When the cutlery rack is in place the retainers must always be closed.
D - CLOSEDD - OPEN
Cutlery rack
 

GB -6-
How to load the racks
4
CLICK!
Rotate the flap
clockwise and
hook on rack
A - OPEN TO OPEN A:
A - CLOSED
AAB
D - CLOSEDD - OPEN
In the upper rack you can load glasses, cups, bowls and, in the right side of the rack, you can load the dessert dishes.
Foldable flaps (A) when open help to load stemmed glasses, long tools or coffee cups.
Plate holders (B) can be folded down to load bowls.
How to adjust upper rack height (if available) - it could be useful to 
lift up upper rack to have more space in...

GB -7-
How to load the racks
4
Arrange crockery so that water does not collect in cavities, ensuring that the spray arms turn freely. Only use dishwasher-proof crockery and dishes. 
Do not use the dishwasher for washing wooden items, aluminium, tin, silver cutlery or decorated crockery (unglazed). In the baskets, dishes (e.g. plates, 
bowls, pots) must be placed in a correct way to let water flow down!
In the lower rack plates and pots can be loaded. Vertical plate holders (E) can 
be folded down to...

GB -8-
Switching off the appliance. Everything OK...
Wash cycle
Select program
6
7
8
Maintenance and careMaintenance and care
Rectifying minor faults yourself...
109
Overview of programs
The max. possible number of programs is illustrated in the chapter “Chart”. The corresponding programs for your appliance can be found on the panel (page 1).
Choose program according to the attached Table of programs (page 2).
Duration of the program depends on the external conditions in the apartment, temperature and...

GB -9-
What to do if...
If a fault occurs, before contacting the After-sales Service, make the following checks to try and remedy the problem.
Most faults can be remedied by taking the following courses of action, quickly restoring normal appliance operation.
How the faults are shown on the display: Function number “F”x - blinkingError number “E”y - blinking 0.5 sec. pause
The appliance...Possible causes...Solutions...
...is not working/will not start- The appliance must be switched on.- Check the...

GB -10-
What to do if...
Crockery and cutlery... Possible causes... Solutions...
...are not perfectly clean/have 
food residues- Too little space between dishes (incorrect 
arrangement of the concave items in the rack).- Arrange crockery so that items do not touch each other. Concave items (e.g. 
bowls, cups) must be arranged facing downwards in the rack.
- Too little detergent; detergent too old or 
incorrectly stored.- If necessary, use more detergent, observing the manufacturer’s indications as...