Home > Whirlpool > Dishwasher > Whirlpool Wp 76 Installation And Maintenance Instructions

Whirlpool Wp 76 Installation And Maintenance Instructions

Here you can view all the pages of manual Whirlpool Wp 76 Installation And Maintenance Instructions. The Whirlpool manuals for Dishwasher are available online for free. You can easily download all the documents as PDF.

Page 1

Whirlpool is a registered trademark of Whirlpool USA5019 396 01064
1
GBWP 76
Before using the dishwasher, read the 
installation and maintenance instructions carefully!
1) Programme data obtained in conformity with European standard EN 50242. Values may vary in relation to usage, e.g.  
different loads, options, different sensor settings (only with sensor programmes), different water supply temperatures, as well 
as water hardness and power supply voltage.
2) Reference programme for energy label in...

Page 2

2
2. QUICK REFERENCE GUIDE
Detailed instructions are given in the following pages, see also chapter “5. What to do if...”
1. Switch on the 
applianceOpen the dishwasher door.
Press the 
ON button.
2. Select a programmePress the button   or   to bring up the desired programme on the display. 
Select options, if available.
3. Select the type of 
detergentThe detergent selection procedure varies depending on the dishwasher model. 
Chapter “1. Overview ” provides instructions for selecting detergent type.
4....

Page 3

3
3. HOW TO USE THE APPLIANCE
PROGRAMME SELECTION
Press the button   or   to bring up the desired programme on the display. The appliance must be switched 
on. If required, select options (if supplied). The corresponding indicator lamp switches on. Appropriate 
programmes and relative available options are detailed in table 1.1 on page 1.
Programme times stated in the table were obtained under normal conditions and may vary 
depending on conditions. Differences of up to 20 minutes are possible with...

Page 4

4
3. HOW TO USE THE APPLIANCE
c. How to adjust the rinse aid dosage regulator
The rinse aid dosage can be adjusted to the detergent used. The lower the setting, the less 
rinse aid is dispensed (factory setting: position 4).
Press the lever 
2 to open the cover.
Using a coin or similar object, turn the arrow to the desired setting. 
After adjusting the rinse aid setting, shut the cover again.
If there are streaks: reduce the dosage by turning the dial to a lower setting (1-3). If crockery is 
not...

Page 5

5
3. HOW TO USE THE APPLIANCE
HOW TO LOAD THE RACKS
UPPER RACK - depending on model
Long-handled utensils (kitchen knives) must be arranged with 
the sharp end facing in towards the appliance.
LOWER RACK - depending on model
Sharp utensils that might cause injury must be placed in the cutlery basket with the sharp end facing downwards. Arrange 
crockery so that water does not collect in cavities, ensuring that the spray arms turn freely.
Only use dishwasher-proof crockery and dishes. Do not use the...

Page 6

6
4. PRECAUTIONS AND GENERAL RECOMMENDATIONS
1. Packing
The packaging materials are 100% recyclable and marked with the recycling symbol.  .
2. Removing the packaging and inspecting the contents
After unpacking, make sure that the dishwasher is undamaged and that the door closes correctly. If in doubt, contact a 
qualified technician or your local retailer.
3. Before using the dishwasher for the first time
- The appliance is designed to operate at ambient temperatures of between 5°C and 45°C.
- This...

Page 7

7
5. WHAT TO DO IF...
If a fault occurs, 
before contacting the After-sales Service, make the following checks to try and remedy the 
problem. Most faults can be remedied by taking the following courses of action, quickly restoring normal 
appliance operation.
The appliance... Possible causes/solutions
...is not working/will not start - The appliance must be switched on.
- Check the household circuit fuse if there is no power supply.
- The dishwasher door must be closed.
- Check whether the “Delayed...

Page 8

8
5. WHAT TO DO IF...
Crockery and cutlery ... Possible causes/solutions
...are not perfectly clean/have food 
residues- In the event of frequent use of the Eco programme 50°C 
(if available), from time to time select the intensive 70°C 
programme (if available).
- The spray arms must not be clogged, the filters must not be 
dirty and must be fitted correctly (see the instructions in 
“Maintenance and installation”).
- The spray arms must be able to turn freely and must not be 
impeded by crockery or...
Start reading Whirlpool Wp 76 Installation And Maintenance Instructions

Related Manuals for Whirlpool Wp 76 Installation And Maintenance Instructions

All Whirlpool manuals