Whirlpool Awoe 9558 Programme Chart Manual

							GB PROGRAMME CHART
The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of 
Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the 
instructions on the garment label and those issued in this programme chart.  M0702
❉:optional / Yes : dosing required
1)
For improved garment care, spin speed is restricted in these programmes.
5019 301 06223
Whirlpool is a registered trademark of Whirlpool USA
Programme
Te m p e -
rature
Care
Labels
Max 
Load
kg
Type of wash/Notes
- Respect the manufacturer’s recommendations on the care label
Detergents and additives
Selectable options
Start
delayInicio
diferido
Spin
Pre-
wash
Main
wash
Softener
Pre-
washPrelav.
Easy
ironing
Intensive
rinseAclar./enx.
Intensivo
Va r i a b l e
spinCentrif.
Max
Spin
Speed
rpm
White Cotton /
Antibacterial
70 - 95 °C9.0
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. 
made of cotton and linen.
At a temperature of 80°C or more, this programme eliminates bacteria, ensuring 
sanitization of your laundry. The bacteria removal efficiency has been tested 
following a similar methodology to the NF EN 13697 standard of Nov. 2001.
❉
Ye s
❉❉❉ ❉ ❉ ❉ ❉
max.
Cotton
Algod.
20 - 60 °C
 
9.0
Synthetics
Sintéticos
20 - 60 °C
 
 
3.5
Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), 
polyamide (Perlon, Nylon) or blends with cotton.
❉
Ye s
❉❉❉ ❉ ❉ ❉ ❉
max.
Delicates
Delicados
20 - 40 °C
 
2.5
Curtains and delicate clothing, dresses, skirts, shirts and blouses.
❉
Ye s
❉❉—— —
❉❉
1000
1)
Wool
Lana/lã
20 - 40 °C2.0
Only woollens, labelled with the Woolmark and identified as machine washable. 
This programme (40°C) is tested and approved by The Woolmark Company for 
machine washable wool.
—
Ye s
❉—— — —
❉❉
1000
1)
Handwash
20 - 40 °C2.0
Textiles made of silk, linen, wool and viscose marked as “handwashable”.
This programme (40°C) is tested and approved by The Woolmark Company for 
handwashable wool.
—
Ye s
❉—— — —
❉❉
400
1)
Baby
Baby/
fabric
20 - 60 °C7.0
Normally soiled baby clothes, baby quilts, beddings and blankets as well as washable 
toys made of cotton and/or linen. 
The washing liquid is rinsed out even more thoroughly and thus helps to protect sensitive 
baby skin.
❉
Ye s
❉❉❉——
❉❉
max.
Big Items
Edredón
20 - 60 °C
 
3.0
Blankets made of synthetic fibres; bed covers filled with feathers, polyester or other 
artificial fibers; sleeping bags, bathmats and similar items.
❉
Ye s
❉❉——
❉❉❉
1000
1)
Outdoor
Sport
20 - 30 °C
 
 
3.5
Normally soiled and sweaty sportswear made of cotton jersey or microfibers.
This programme includes a prewash cycle – you can add detergent also to the prewash 
chamber. Do not add any softener.
❉
Ye s
———
❉❉❉❉
max.
SuperEco
20 - 60 °C9.0
Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc. 
made of cotton and linen.
Offers highest economy in energy consumption by prolonged washing duration. Ideal to 
be run overnight to additionally profit from the more favourable energy rates. To avoid 
noise of spinning at night, set spin speed to “0” and start spin programme in the 
morning, or define programme start with “Start delay ” accordingly.
—
Ye s
❉—— —
❉❉❉
max.
Daily load
20 - 60 °C
 
6.0
Slightly to normally soiled textiles made of cotton and/or synthetics.
—
Ye s
❉——
❉❉❉❉
max.
Speed 15
20 - 30 °C3.0
Refreshes briefly worn outer clothing made of cotton, artificial fibers and blends 
with cotton.
—
Ye s
❉—— — —
❉❉
max.
Rinse & Spin
Aclar./enx. & Centrif.
——
9.0
Same as the last rinse and the final spin in the “Cotton” programme.
——
❉—— —
❉❉❉
max.
Spin
Centrifug.
——
9.0
In this programme spinning is intensive. Same as the spin cycle in the “Cotton” 
programme.
—— — — — — —
❉❉
max.
A. Programme selector
B. Display
C. “Temperature” button
D. “Variable spin” button  
E. “Start delay” button
F. “Start (Pause)” button
G. “Reset/Drain” button
H. “Favourites” buttonI. Programme sequence indication
J. “Child lock” indication
K. “Detergent overdosage” indication
L. Red failure indications
Add garment Programme
in processProgramme
finished
F
G
AB
L
KC
D
E
H
I
}
J
F
GB
L
KC
D
E
H
I
}
J
30106223GB.fm  Page 1  Friday, October 17, 2008  5:06 PM
Black process 45.0° 150.0 LPI 
 
						

							5019 301 06223
Whirlpool is a registered trademark of Whirlpool USA
Add detergent as indicated on the front page and as described in 
the chapter “Detergent and Additives” in your Instructions for Use.
Turn the programme selector to the desired programme; the light 
of the 
“Start (Pause)” button   blinks. The 
temperature and 
spin speed indicated on the display can be altered by pressing the 
“Temperature” button   or the “Variable spin” button .
When the combination of programme and additional option(s) is 
not possible, the indication lights switch off automatically. 
Unsuitable combinations of options are deselected automatically.
“Prewash” button
 Only for heavily soiled loads (for example sand, granular dirt) 
sensible. Increases the cycle time by approximately 15 min.
 Do not use liquid detergent for the main wash when activating 
the “Prewash” option.
“Clean+” button
 Choose this option if you use an in-wash additive for stain removal 
(powder, for example “Vanish”) - it will optimize the additive’s 
efficiency to get better wash performance and stain removal.
 Choose temperature of 30 or 40°C and use with maximum load.
 Add an appropriate amount of in-wash additive for stain 
removal (powder) to the main wash chamber, together with 
your detergent (only use powder detergent with this option). 
Respect the manufacturer’s dosing instructions.
 Prolongs the programme by approx. 10 to 15 minutes.
 Appropriate for use of stain removers and bleaches on oxygen 
basis. 
Chlorine or perborate bleaches must not be used!“Easy ironing” button
 Makes ironing easier by an increased water quantity and a very 
gentle spin.
“Intensive rinse” button
 More water is added and rinse cycle is prolonged.
 This option is particularly suitable for areas with very soft water or 
for washing baby linen, and helps people with allergies.
“ Variable spin” button
 Every programme has a predefined spin speed.
 Press the button to set another spin speed.
 If spin speed “0” is selected, the final spinning is cancelled but 
intermediate spin peaks remain during rinse. The water is 
drained out only.
 If you select “Rinse hold”  , the laundry remains in the last 
rinse water without progressing to the final spin cycle, to avoid 
creasing and prevent colours from changing. To activate the 
“Rinse hold”, press the “Variable spin” button repeatedly until the 
“Rinse hold” symbol   on the display lights up.
- The wash programme stops to “Rinse hold” when the 
“Rinse hold” symbol   on the display blinks; the light of 
“Start (Pause)” button blinks as well.
- To terminate the “Rinse hold” by draining the water, 
without any spinning, press the 
“Start (Pause)” button.
- To terminate the “Rinse hold” by spinning the laundry, press 
the “Variable spin” button to select the desired spin speed 
and then 
“Start (Pause)” to start the spin cycle.
- Do not leave the laundry to soak for too long in the “Rinse hold”.
If there is a programme setting which you use frequently, the 
appliance offers the possibility to save one setting for each 
programme so that it can be used again by just pushing one button.CONSUMPTION DATA
Programme
Te m p e r a t u r e
(°C)
Load
(kg)
Wa t e r
(l)
Energy
(kWh)
Approx. Programme Duration
(hours : minutes)
*
White Cotton / Antibacterial 95 9.0 87
**2.60 2:10
Cotton
***60 9.0 69 1.53 2:20
Cotton 40 9.0 82 0.80 2:05
Synthetics 60 3.5 46
**0.85 1:35
Synthetics 40 3.5 42 0.50 1:20
Delicates 30 2.5 60 0.40 0:45
Wool 40 2.0 60 0.60 0:45
Handwash 40 2.0 45 0.60 0:40
Baby 40 7.0 95 0.85 2:21
Big Items 40 3.0 74 0.75 1:30
Outdoor 30 3.5 54 0.55 1:34
SuperEco 60 9.0 80 1.08 4:00
Daily load 40 6.0 73 0.60 1:00
Speed 15 30 3.0 30 0.20 0:15
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home 
may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
*The time indicated on the display can deviate from the values in the table, because it takes into account the operation conditions 
applicable at that time.
**To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
***Reference Programme for Energy Label.ADD DETERGENTS, CLOSE THE DOOR 
AND SELECT THE PROGRAMMESELECT ANY DESIRED OPTION
SAVE YOUR FAVOURITE PROGRAMMES
 Select the desired programme, temperature, spin speed and 
option(s), push and hold the 
“Favourites” button for at least 
3 seconds. The lamp next to 
“Favourites” shortly blinks and 
then lights up - the programme setting is saved.
Next time you want to use your individual programme setting, 
select the programme, push the 
“Favourites” button and start by 
pushing 
“Start (Pause)”.
If you want to replace the saved programme setting by another 
one, proceed as already described above.
The “Start delay” allows to run the machine at the consumer’s 
convenience, for example at night when electricity is cheaper. Do 
not use liquid detergent when activating the “Start delay”.
 Select programme, temperature, spin speed and options.
 Press the Start delay button to select one of the delay time 
steps between 0:30 and 23:00 hours.
Press the 
“Start (Pause)” button. 
The countdown of the delay time begins; the clock symbol next to 
the delay time and the colon between hours and minutes blink.
 The time delay indication disappears when the programme 
starts and it is replaced by the remaining programme time.
To cancel the “Start delay ”
..before you press the “Start (Pause)” button:
 Press the 
“Reset / Drain” button, or set the start delay time to 
“0:00” - the delay time disappears after a few seconds.
..after having pressed the “Start (Pause)” button:
Press the 
“Reset/Drain” button for at least 3 seconds; the start 
delay time disappears from the display. Or press 
“Start (Pause)” 
twice to start the selected programme immediately.
Before starting a programme, the symbol lights to show that the 
door can be opened to add more washing. As soon as you press 
“Start (Pause)”, the door will lock until the end of the 
programme and must on no account be forced open. In case you 
have to open it urgently during a running programme, refer to 
“Reset a running programme before the end”.
If you try to start a wash programme and the door is not properly 
closed, the “Add garment” indication will blink.
Open the tap and press the 
“Start (Pause)” button; the blinking 
“Start (Pause)” button light becomes constant. The “Add 
garment” indication goes out, and the lit bubbles indicate that the 
programme is in process. In some phases, the remaining 
programme time is newly calculated - if this is the case, the “6
th 
sense” indication   on the display will fade, and the remaining 
programme time is replaced by an animation.
Activating the child lock prevents children from starting a wash 
cycle or changing the settings of a running programme. The child 
lock cannot be activated or deactivated when the programme 
selector is in the “Off/O” position. To activate the child lock:  Turn the programme selector to a programme position, or run 
a programme as usual. 
 Press the “Temperature” and the “Variable spin” button 
simultaneously for at least 3 seconds. The “Child lock” symbol 
 will shortly blink and then light up to indicate that the 
child lock is active.
The programme setting cannot be changed anymore; the only change 
possible is to switch the washer off by turning the programme selector 
to the “Off/O” position. To deactivate the child lock, proceed in the 
same way as for activating it.
If one of the red failure indications on the display lights up, refer to 
the “Troubleshooting Guide” in your “Instructions for Use”.
 The display shows “End”, and the “Programme finished” 
indication   lights up.
1. Turn the programme selector to the “Off/O” position.
2. Close the water tap.
3. Open the door and unload the machine.
 Leave the door ajar to allow the drum to dry.
 If you do not turn the programme selector to the “Off / O” 
position, all lights of the control panel go out after a few 
minutes to save energy - only “End” will remain on the display.
The symbol will blink at the end of the programme if you used too 
much detergent. Use less detergent next time.
1. Press the 
“Start (Pause)” button to pause the programme. 
The light blinks.
2. Select the new programme, temperature, any options and 
another spin speed if you want.
3. Press the 
“Start (Pause)” button again. The new 
programme continues at the same position where the 
previous programme was interrupted. Do not add detergent 
for this programme.
The 
“Reset/Drain” button cancels a programme before the end.
Press the 
“Reset/Drain” button for at least 3 seconds; an 
animation appears on the display. Any existing water is drained 
out before the door can be opened.
START DELAY“ADD GARMENT” INDICATION PROGRAMME STARTCHILD LOCK
RED FAILURE INDICATIONS PROGRAMME ENDDETERGENT OVERDOSAGE INDICATIONCHANGE PROGRAMME AND/OR OPTIONS 
AFTER PROGRAMME STARTRESET A RUNNING PROGRAMME BEFORE 
THE END
30106223GB.fm  Page 2  Friday, October 17, 2008  5:06 PM
Black process 45.0° 150.0 LPI