Whirlpool Awoe 9349 Programme Chart Manual

							GB PROGRAMME CHART
5019 301 06397
Whirlpool is a registered trademark of Whirlpool USA
❉:optional / Yes : dosing required
1)
For improved garment care, spin speed is restricted in this programme.The wool/handwash cycle of this machine has been tested and approved by The Woolmark Company for the washing of 
Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the 
instructions on the garment label and those issued in this programme chart.  M0702
Programme
Te m p e -
rature
Care
Labels
Max.
Load
kg
Type of wash/Notes
- Respect the manufacturer’s recommendations on the care label
Detergents and additives
Selectable options
Start
delay
Spin
Pre-
wash
Main
wash
Softener
Pre-
wash
Eco
Easy
ironing
Intensive
rinse
Spin
speed
Max.
Spin
Speed
rpm
Mixed
20 - 60 °C6.0
Slightly to normally soiled robust laundry made of cotton, linen, artificial fibres and their blends.
Effective one-hour programme. Make sure to wash only similar colours together in one wash load. If soil level 
requires, add oxygen-based stain removers.
—
Ye s
❉——
❉❉❉❉
max.
Cotton
20 - 95 °C9.0
Normally to heavily soiled towels, underwear, table and bed linen etc. made of cotton and linen.
❉
Ye s
❉❉❉ ❉ ❉❉ ❉
max.
Synthetics
20 - 60 °C3.5
Normally soiled blouses, shirts, overalls, etc. made of polyester (Diolen, Trevira), polyamide (Perlon, 
Nylon) or blends with cotton.
❉
Ye s
❉❉❉ ❉ ❉❉ ❉
max.
Delicates
20 - 40 °C2.5
Curtains and delicate clothing, dresses, skirts, shirts and blouses.
❉
Ye s
❉❉—— —
❉❉
1000
1)
Wool/Handwash
20 - 40 °C2.0
Woollens, labelled with the Woolmark and identified as machine washable, as well as textiles made of 
silk, linen, wool and viscose marked as handwashable.
This programme is tested and approved by The Woolmark Company for machine- and handwashable wool. 
Select spin speed according to the manufacturers recommendations on the care label.
—
Ye s
❉—— — —
❉❉
1000
1)
White
20 - 60 °C9.0
Normally to heavily soiled and robust white cotton laundry.
Save energy by selecting a lower wash temperature and adding an oxygen-based bleach product, in addition to your detergent.
—
Ye s
❉—— — —
❉❉
max.
Light colours
20 - 60 °C6.0
White and pastel shaded garments made of delicate fabrics.
Gentle wash programme to avoid graying or yellowing of your laundry. Use heavy duty detergent, if necessary also 
stain removers or bleaches on oxygen basis. Do not use liquid detergent.
—
Ye s
❉—— — —
❉❉
1000
1)
Dark
20 - 60 °C6.0
Black and dark garments made of cotton, cotton blends and polyester.
Special programme to reduce colour fading and local discolouration. Prefer to use a special liquid detergent for 
dark garments with this programme.
—
Ye s
❉—— —
❉❉ ❉
1000
1)
SuperEco
20 - 60 °C9.0
Normally to heavily soiled and robust underwear, table and bed linen, towels and shirts made of cotton and linen.
Offers highest economy in energy consumption by prolonged washing duration. Ideal to be run overnight to 
additionally profit from the more favourable energy rates. To avoid noise of spinning at night, set spin speed to “0” 
and start spin programme in the morning, or define programme start with “Start delay ” accordingly.
—
Ye s
❉—— —
❉❉ ❉
max.
AquaEco
20 - 40 °C3.0
Lightly soiled laundry made of synthetic fibres, or synthetics mixed with cotton garments. 
Saving programme with a very low water consumption. Use liquid detergent and the lowest recommended 
amount for 3kg laundry. Do not use softener.
—
Ye s
——— — —
❉❉
max.
Speed 15
20 - 30 °C3.0
Briefly worn clothing made of cotton, artificial fibers and blends with cotton.
Refresh programme. Use lowest recommended detergent amount.
—
Ye s
❉—— — —
❉❉
max.
Bedlinen
20 - 95 °C
 
3.5
White and coloured bedlinen made of cotton and synthetic fibres, or blends of both. 
Reduces microbes and gently cleans, also delicate bedlinen, A thorough rinse phase helps to prevent detergent and 
pollen residues. Prefer powder detergent for this programme.
—
Ye s
❉—— —
❉❉ ❉
max.
Big Items
20 - 60 °C3.0
Blankets made of synthetic fibres; bedcovers filled with feathers, polyester or other artificial fibres; 
sleeping bags, bathmats and similar items.
❉
Ye s
❉❉——
❉❉ ❉
1000
1)
Rinse & Spin
——
9.0
Rinse and intensive spin programme.
Same as the last rinse and the final spin in the “Cotton” programme.
——
❉—— —
❉❉ ❉
max.
0
°C
A. “Door open” indication
This washing machine is equipped with 
automatic safety functions which detect and 
diagnose faults at an early stage and react 
appropriately, e.g.:
B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication
E. Programme selector
F. “Start (Pause)” button
G. “Spin speed” button
(with “Rinse hold”  )
H. Programme sequence indication
I. “Reset/Drain” button
J. “Start delay” button
K. “Temperature” button
L. Display
DC
F
I
EAB
G
L
}
H
K
J
FabricsColoursEcoSpecials
30106397GB.fm  Page 1  Tuesday, June 1, 2010  10:18 AM
Black process 45.0° 150.0 LPI 
 
						

							5019 301 06397
Whirlpool is a registered trademark of Whirlpool USA
Load your laundry, close the door properly and add detergent as 
indicated on the front page and as described in the chapter “Detergent 
and Additives” in your Instructions for Use (remove separator in 
detergent dispenser for use of powder detergent if necessary).
1. Turn the 
programme selector to the desired programme. 
The display shows the programme duration in hours and 
minutes as well as the predefined temperature. The 
“Start 
(Pause)” button  blinks.
2. The 
temperature can be altered by pressing the 
“Temperature” button.
3. The indication lamp of the predefined 
spin speed lights up. In 
case you want to set another spin speed, press the “Spin 
speed” button .
Push the button(s) of any option(s) desired - the respective 
indication lights up.
When the combination of programme and option is not possible, 
the lights switch off automatically. Unsuitable combinations of 
options are deselected automatically.
“Prewash” button
 Only for heavily soiled loads (for example sand, granular dirt). 
Increases the cycle time by approximately 15 min.
 Do not use liquid detergent for the main wash when activating 
the Prewash option.
“Eco” button
 With a modified temperature profile and a prolonged washing 
duration, the optimum combination of good washing result and 
lower energy consumption is achieved.“Easy ironing” button
 Reduces creasing by an increased water quantity and a very gentle spin.
“Intensive rinse” button
 More water is added and rinse cycle is prolonged.
 This option is particularly suitable for areas with very soft 
water, washing baby linen and helping people with allergies.
“Spin speed” button  (incl. “Rinse hold”  )
 Every programme has a predefined spin speed.
 Press the button to set another spin speed.
 If you select spin speed “0”, the final spinning is cancelled, and 
the water is drained out only. However, intermediate spin 
phases remain during rinse.
If you select 
“Rinse hold”  , the laundry remains in the 
last rinse water without progressing to the final spin cycle to 
avoid creasing and prevent colours from changing.
-Select 
“Rinse hold” if you want to postpone spinning to a 
later time or if you want to drain only.
- Do not leave the laundry to soak in the rinse hold for too long.
- The programme stops to “Rinse hold” when the “Rinse 
hold”   light in the programme sequence indicator is 
on. The 
“Start (Pause)” button
 light blinks.
- To terminate the “Rinse hold” by draining the water, without 
any spinning, press the 
“Start (Pause)” button
 .
- To terminate the programme by spinning the laundry, press the 
“Spin speed” button to select the desired spin speed and then 
the 
“Start (Pause)” button   to start the spin cycle.CONSUMPTION DATA
Programme
Te m p e r a t u r e
(°C)
Load
(kg)
Wa t e r
(l)
Energy
(kWh)
Approx. Programme Duration
(hours : minutes)
*
Mixed 40 6.0 73 0.60 1:00
Cotton 95 9.0 87
**2.60 2:20
Cotton 60 9.0 64 1.53 2:30
Cotton with “Eco”
***60 9.0 64 1.17 4:00
Cotton 40 9.0 82 0.80 2:15
Synthetics 60 3.5 46
**0.85 1:35
Synthetics 40 3.5 42 0.50 1:20
Delicates 30 2.5 60 0.40 0:45
Wool/Handwash 40 2.0 45 0.60 0:40
White 40 9.0 82 0.90 2:30
Light colours 40 6.0 70 0.50 1:20
Dark 40 6.0 49 0.60 1:40
SuperEco 60 9.0 80 1.08 4:00
AquaEco 40 3.0 19 0.45 1:00
Speed 15 30 3.0 30 0.20 0:15
Bedlinen 60 3.5 60 1.30 2:00
Big Items 40 3.0 74 0.75 1:30
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home  may vary with respect 
to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
*The time indicated on the display can deviate from the values in the table, because it takes into account the operation conditions applicable at that time.
**To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
***Reference Programme for Energy Label (with separator in detergent dispenser removed for use of powder detergent).ADD DETERGENTS, CLOSE THE DOOR 
AND SELECT THE PROGRAMMESELECT ANY DESIRED OPTION
The “Start delay”   allows to run the machine at the consumer’s 
convenience, for example at night when electricity is cheaper. Do 
not use liquid detergent when activating the “Start delay”.
 Select programme, temperature and options.
 Press the “Start delay ” button to select a delay time up to 23 
hours. The light of the 
“Start (Pause)” button   blinks.
Press the 
“Start (Pause)” button  . The countdown of 
the delay time begins. The light of the 
“Start (Pause)” button 
 is on. The light of the start delay button will keep blinking 
until the programme starts.
 As soon as the programme starts, the start delay on the display 
is replaced by the remaining programme time, and the light of 
the “Start delay ” button goes off.
 Once having pressed the 
“Start (Pause)” button , the 
number of hours preselected can be changed by pressing and 
holding the “Start delay ” button.
To cancel the “Start delay ”
...before you press “Start (Pause)” :
 Turn the programme selector to another position or press the 
“Reset/Drain” button  .
...after having pressed “Start (Pause)” :
Press 
“Start (Pause)” - the delay time disappears from 
the display. Press 
“Start (Pause)” again to start the 
selected programme immediately.
Open the tap and press 
“Start (Pause)” . The light stops 
blinking and is on. The programme sequence indicator shows the 
current programme phase, running from left to right through 
Wash, Rinse, Spin/Drain.
The display shows the remaining programme time. Due to 
variations in load and temperature of inlet water, the remaining 
time is newly calculated in certain programme phases. If this is the 
case, 
an animation appears on the display.
Activating the child lock prevents children from starting a wash 
cycle or changing the settings of a running programme. The child 
lock cannot be activated or deactivated when the programme 
selector is in the “Off/O” position. To activate the child lock: 
 Turn the programme selector to a programme position, or run 
a programme as usual. 
 Press the 2 buttons marked with the key symbol   
simultaneously for at least 3 seconds. A key-like symbol will shortly 
appear on the display to indicate that the child lock is active.
Any time you try to change a programme setting with active child 
lock, the display will briefly show the key-like symbol. The 
programme setting cannot be changed anymore. The only change 
possible is to switch the washer off by turning the programme 
selector to the “Off/O” position. To deactivate the child lock:
 Press again the 2 buttons marked with the key symbol   
simultaneously for at least 3 seconds.Before starting and after end of a programme, the lamp lights to show 
that the door can be opened. As long as a wash programme is running, 
the door remains locked and must on no account be forced open. In 
case you have an urgent need to open it during a running programme, 
refer to “Reset a running programme before the end”.
“Service”
Lighting up of the “Service” indication can be caused by a fault in an 
electrical component. Refer to the “Troubleshooting Guide” in your 
Instructions for Use. If the fault persists, contact our After Sales Service.
“Water tap closed”
The appliance has no or insufficient water supply. Open the water 
tap. If the indication still lights up, refer to the “Troubleshooting 
Guide” in the Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the drain hose is 
kinked or the filter must be cleaned. In the latter case refer to the 
Instructions for Use (“Removing the Filter”).
 The display shows “End” and the “Door open” indication   lights.
1. Turn the programme selector to the “Off/O” position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
1. Press 
“Start (Pause)”   to pause the programme. The 
light blinks.
2. Select the new programme, temperature, any options and 
another spin speed if you want.
3. Press 
“Start (Pause)”   again. The light is on, and the 
programme continues at the same position where the 
previous programme was interrupted. Do not add detergent 
for this programme.
The 
“Reset/Drain” button   cancels a programme before 
the end.
Press the 
“Reset/Drain” button   for at least 3 
seconds. “rES” appears on the display. The water is drained 
out; it may last a while until you can open the door.START DELAYPROGRAMME STARTCHILD LOCK
“DOOR OPEN” INDICATIONRED INDICATIONSPROGRAMME ENDCHANGE PROGRAMME AND/OR OPTIONS 
AFTER PROGRAMME STARTRESET A RUNNING PROGRAMME BEFORE 
THE END
The Sensor Technology automatically adapts Programme Time, Water and Energy consumption to the size of your wash load.
30106397GB.fm  Page 2  Tuesday, June 1, 2010  10:18 AM
Black process 45.0° 150.0 LPI