Whirlpool Awoe 9348 Programme Chart Manual

							GB PROGRAMME CHART
5019 301 06217
Whirlpool is a registered trademark of Whirlpool USA
❉:optional / Yes : dosing required
1)
For improved garment care, spin speed is restricted in this programme.The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of 
Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the 
instructions on the garment label and those issued in this programme chart.  M0702
Programme
Te m p e -
rature
Care
Labels
Max.
Load
kg
Type of wash/Notes
- Respect the manufacturer’s recommendations on the 
care label
Detergents and additives
Special options
Max
Spin
Speed
rpm
Pre-
wash
Main 
Wa s h
Softener
Start
delay
Opóźnienie
startu
Pre-
washWstępne
Easy
ironingBez
zagnieceń
Intensive
rinseIntensywne
płukanie
Va r i a b l e
spinPredkość
wirowania
White Cotton /
Antibacterial
Bawełniane
(Antybakteria)
70 - 95 °C
9.0
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts 
etc. made of cotton and linen.
At a temperature of 80°C or more, this programme eliminates bacteria, 
ensuring sanitization of your laundry. The bacteria removal efficiency has been 
tested following a similar methodology to the NF EN 13697 standard of Nov. 
2001.
❉
Ye s
❉❉❉❉❉ ❉ ❉
max.
Colours
Bawełniane
20 - 60 °C
 
9.0
Synthetics
Syntetyczne
20 - 60 °C
 
 
3.5
Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, 
Trevira), polyamide (Perlon, Nylon) or blends with cotton.
❉
Ye s
❉❉❉❉❉ ❉ ❉
max.
Delicates
Delikatne
20 - 40 °C
 
2.5
Curtains and delicate clothing, dresses skirts, shirts and blouses.
❉
Ye s
❉❉❉—— —
❉
1000
1)
Wool
Wełniane
20 - 40 °C
2.0
Only woollens, labelled with the Woolmark and identified as machine washable. 
This programme (40°C) is tested and approved by The Woolmark Company 
for machine washable wool.
—
Ye s
❉❉—— — —
❉
1000
1)
Handwash /
Lingerie
20 - 40 °C
2.0
Textiles made of silk, linen, wool and viscose marked as “handwashable”. 
Up to a temperature of 30°C, this programme is particularly suitable to treat 
delicate lingerie (use of a laundry net strongly recommended).
This programme (40°C) is tested and approved by The Woolmark Company 
for handwashable wool.
—
Ye s
❉❉—— — —
❉
400
1)
Jeans
Jeans
20 - 60 °C
7.0
Normally soiled cotton jeanswear and garments made of robust jeanslike 
material such as trousers and jackets.
❉
Ye s
❉❉❉❉——
❉
max.
Big Items
Duże rzeczy
20 - 60 °C
 
3.0
Blankets made of synthetic fibres; bed covers filled with feathers, polyester or 
other artificial fibres; sleeping bags, bathmats and similar items.
❉
Ye s
❉❉❉——
❉❉
1000
1)
Sport
Sport
20 - 30 °C
 
 
3.5
Normally soiled and sweaty sportswear made of cotton jersey or microfibres.
This programme includes a prewash cycle – you can add detergent also to the 
prewash chamber. Do not add any softener.
❉
Ye s
—
❉——
❉❉❉
max.
SuperEco
20 - 60 °C
9.0
Slightly to normally soiled bed linen, table linen and underwear, towels, shirts 
etc. made of cotton and linen.
Offers highest economy in energy consumption by prolonged washing duration. Ideal 
to be run overnight to additionally profit from the more favourable energy rates. To 
avoid noise of spinning at night, set spin speed to “0” and start spin programme in 
the morning, or define programme start with “Start Delay ” accordingly.
—
Ye s
❉❉—— —
❉❉
max.
Daily load
20 - 60 °C
 
6.0
Slightly to normally soiled textiles made of cotton and/or synthetics.
—
Ye s
❉❉——
❉❉❉
max.
Speed 15
20 - 30 °C
3.0
Shortly worn outer clothing made of cotton, polyester, polyamide and blends 
with cotton.
—
Ye s
❉❉—— — —
❉
max.
Rinse & Spin
Płukanie & Wirowanie
——
9.0
Same as the last rinse and the final spin in the “Cotton” programme.
——
❉❉—— —
❉❉
max.
Spin
Wirowanie
——
9.0
In this programme spinning is intensive. Same as the spin cycle in the “Cotton” 
programme.
—— —
❉—— — —
❉
max.
A. “Door open” indication
This washing machine is equipped with 
automatic safety functions which 
detect and diagnose faults at an early 
stage and react appropriately, e.g.:
B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication
E. Programme selector
F. “Start (Pause)” button
G. “Child lock button 
H. “Variable spin” button
I. Programme sequence indicator
J. “Reset/Drain” button
K. “Start delay” button
L. “Temperature” button
M. Display
DC
F
J
EAB
H
M
}
I
L
K
G
30106217GB.fm  Page 1  Wednesday, September 17, 2008  3:38 PM
Black process 45.0° 150.0 LPI 
 
						

							5019 301 06217
Whirlpool is a registered trademark of Whirlpool USA
Load your laundry, close the door properly and add 
detergent as indicated on the front page and as described 
in the chapter “Detergent and Additives” in your 
Instructions for Use.
1. Turn the 
programme selector to the desired 
programme. The display shows the programme duration 
in hours and minutes as well as the predefined 
temperature. The 
“Start (Pause)” button blinks.
2. The 
temperature can be altered by pressing the 
“Temperature” button.
3. The indication lamp of the predefined 
spin speed 
lights up; in case you want to set another spin speed, 
press the “Variable spin” button.
Push the button(s) of any option(s) desired - the respective 
indication lights up.
When the combination of programme and option is not 
possible, the lights switch off automatically. Unsuitable 
combinations of options are deselected automatically.
“Prewash” button
 Only for heavily soiled loads (for example sand, 
granular dirt) sensible. Increases the cycle time by 
approximately 15 min.
 Do not use liquid detergent for the main wash when 
activating the Prewash option.
“Clean +” button
 Choose this option if you use an in-wash additive for 
stain removal (powder, for example “Vanish”) - it will 
optimize the additive’s efficiency to get better wash 
performance and stain removal.
 Selectable for programmes “Cotton” and “Synthetics”; 
choose temperature of 30 or 40°C and use with 
maximum load. Add an appropriate amount of in-wash additive for stain 
removal (powder) to the main wash chamber, together 
with your detergent (only use powder detergent with this 
option). Respect the manufacturer’s dosing instructions.
 Prolongs the programme by approx. 10 to 15 minutes.
 Appropriate for use of stain removers and bleaches on 
oxygen basis. 
Chlorine or perborate bleaches must 
not be used!
“Easy ironing” button
 Helps to make ironing easier.
 Increases the water quantity and the clothes are spun 
very gently.
“Intensive rinse” button
 More water is added and rinse cycle is prolonged.
 This option is particularly suitable for areas with very soft 
water, washing baby linen and helps people with allergies.
“ Variable spin” button
 Every programme has a predefined spin speed.
 Press the button to set another spin speed.
 If you select spin speed “0”, the final spinning is 
cancelled but intermediate spin peaks remain during 
rinse. The water is drained out only.
If you select 
“Rinse hold”, the laundry remains in the last 
rinse water without progressing to the final spin cycle to 
avoid creasing and prevent colours from changing.
-Select 
“Rinse hold” if you want to postpone 
spinning to a later time or if you want to drain only.
- Do not leave the laundry to soak in the rinse hold for too long.
- The programme stops to “Rinse hold” when the 
“Rinse hold” light in the programme sequence 
indicator is on; the 
“Start (Pause)” button blinks.
-To terminate the “Rinse hold” by draining the 
water, without any spinning, press the 
“Start 
(Pause)” button.
- To terminate the programme by spinning the 
laundry, press the “Variable spin” button to select 
the desired spin speed and then the 
“Start 
(Pause)” button to start the spin cycle.CONSUMPTION DATA
Programme
Te m p e r a t u r e
(°C)
Load
(kg)
Wa t e r
(l)
Energy
(kWh)
Approx. Programme Duration
(hours : minutes)
*
White Cotton / Antibacterial 95 9.0 87
**2.60 2:10
Cotton
***60 9.0 69 1.53 2:20
Cotton 40 9.0 82 0.80 2:05
Synthetics 60 3.5 46
**0.85 1:35
Synthetics 40 3.5 42 0.50 1:20
Delicates 30 2.5 60 0.40 0:45
Wool 40 2.0 60 0.60 0:45
Handwash 40 2.0 45 0.60 0:40
Handwash / Lingerie 30 2.0 45 0.60 0:40
Jeans 40 7.0 95 0.85 2:21
Big Items 40 3.0 74 0.75 1:30
Sport 30 3.5 54 0.55 1:34
SuperEco 60 9.0 80 1.08 4:00
Daily load 40 6.0 73 0.60 1:00
Speed 15 30 3.0 30 0.20 0:15
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary 
with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.*
The time indicated on the display can deviate from the values in the table, because it takes into account the household conditions applicable at that time.
**
To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
***
Reference Programme for Energy Label.
ADD DETERGENTS, CLOSE THE DOOR 
AND SELECT THE PROGRAMMESELECT ANY DESIRED OPTION
The “Start delay” allows to run the machine at the 
consumer’s convenience, for example at night when 
electricity is cheaper. Do not use liquid detergent when 
activating the “Start delay”.
 Select programme, temperature and options.
 Press the “Start delay ” button to select a delay time up to 23 
hours; the light of the 
“Start (Pause)” button blinks.
Press the 
“Start (Pause)” button; the countdown of 
the delay time begins. The light of the 
“Start (Pause)” 
button is on; the light of the start delay button will keep 
blinking until the programme starts.
 As soon as the programme starts, the start delay on 
the display is replaced by the remaining programme 
time, and the light of the “Start delay ” button goes off.
 Once having pressed the 
“Start (Pause)” button, the 
number of hours preselected can be reduced by 
pressing and holding the “Start delay ” button. From 1 
hour on, the delay time can also be reduced by minutes.
To cancel the “Start delay ”
..before you press “Start (Pause)”:
 Turn the programme selector to another position or 
press the 
“Reset/Drain” button.
..after having pressed “Start (Pause)”:
 Press the 
“Reset/Drain” button for at least 3 seconds 
- the start delay time disappears from the display, or 
just press 
“Start (Pause)” to start the selected 
programme immediately.
Open the tap and press 
“Start (Pause)”; the light stops 
blinking and is on. The programme sequence indicator 
shows the current programme phase, running from left to 
right through Wash, Rinse, Spin/Drain.
The display shows the remaining programme time. Due to 
variations in load and temperature of inlet water, the remaining 
time is newly calculated in certain programme phases. If this is 
the case, 
an animation appears on the display.
Activating the child lock prevents children from starting a 
wash cycle or changing the settings of a running 
programme. The child lock cannot be activated or 
deactivated when the programme selector is in the “Off/
O” position. To activate the child lock: 
 Turn the programme selector to a programme 
position, or run a programme as usual. 
 Press the 2 buttons marked with the key symbol 
 simultaneously for at least 3 seconds; a key-like 
symbol will shortly appear on the display to indicate 
that the child lock is active.
Any time you try to change a programme setting with 
active child lock, the display will shortly show the key-like 
symbol. The programme setting cannot be changed 
anymore; the only change possible is to switch the washer 
off by turning the programme selector to the “Off/O” 
position. To deactivate the child lock: Press again the 2 buttons marked with the key symbol 
 simultaneously for at least 3 seconds.
Before starting and after end of a programme, the lamp 
lights to show that the door can be opened. As long as a 
wash programme is running, the door remains locked and 
must on no account be forced open. In case you have an 
urgent need to open it during a running programme, refer 
to “Reset a running programme before the end”.
“Service”
Lighting up of the “Service” indication can be caused by a 
fault in an electrical component. Refer to the 
“Troubleshooting Guide” in your Instructions for Use; if 
the fault persists, contact our After Sales Service.
“Water tap closed”
The appliance has no or insufficient water supply; a signal 
sounds. Open the water tap; if the indication still lights up, refer 
to the “Troubleshooting Guide” in the Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the drain 
hose is kinked or the filter must be cleaned; in the latter case 
refer to the Instructions for Use (“Removing the Filter”).
 The display shows “End” and the “Door open” 
indication lights.
1. Turn the programme selector to the “Off/O” position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
1. Press 
“Start (Pause)” to pause the programme; the 
light blinks.
2. Select the new programme, temperature, any options 
and another spin speed if you want.
3. Press 
“Start (Pause)” again. The light is on, and the 
programme continues at the same position where the 
previous programme was interrupted. Do not add 
detergent for this programme.
The 
“Reset/Drain” button cancels a programme before the 
end.
Press the 
“Reset/Drain” button for at least 3 seconds; 
“rES” appears on the display. Any existing water is drained 
out before the door can be opened.START DELAYPROGRAMME STARTCHILD LOCK
“DOOR OPEN” INDICATIONRED INDICATIONSPROGRAMME ENDCHANGE PROGRAMME AND/OR OPTIONS 
AFTER PROGRAMME STARTRESET A RUNNING PROGRAMME BEFORE 
THE END
30106217GB.fm  Page 2  Wednesday, September 17, 2008  3:38 PM
Black process 45.0° 150.0 LPI