Whirlpool Awoe 8758 Programme Chart Manual

							GB PROGRAMME CHART❉:optional / Yes : dosing required
1)
For improved garment care, spin speed is restricted in these programmes.
2)
Do not use liquid detergent when activating the “Start Delay ”.
3)
Do not use liquid detergent for the main wash when activating the “Prewash” option.
Whirlpool is a registered trademark of Whirlpool USA
The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of 
Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the 
instructions on the garment label and those issued in this programme chart.  M0702
5019 301 06213
Programme
Te m p e -
rature
Care
Labels
Max 
Load
kg
Ty p e  o f  w a s h / N o t e s
- Respect the manufacturer’s recommendations on the care label
Detergents and additives
Selectable options
Start
delay
2)
Spin
Pre-
wash
Main
wash
Softener
Pre-
wash
Clean +
Easy
ironing
Intensive
rinse
Va r i a b l e
spin
Max
Spin
Speed
rpm
White Cotton /
Antibacterial
70 - 95 °C8.0
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of 
cotton and linen.
At a temperature of 80°C or more, this programme eliminates bacteria, ensuring sanitization of 
your laundry. The bacteria removal efficiency has been tested following a similar methodology 
to the NF EN 13697 standard of Nov. 2001.
❉3)
Ye s
❉❉❉ ❉ ❉ ❉ ❉
max.
Cotton
20 - 60 °C
 
8.0
Synthetics
20 - 60 °C
 
 
3.5
Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide 
(Perlon, Nylon) or blends with cotton.
❉3)
Ye s
❉❉❉ ❉ ❉ ❉ ❉
max.
Delicates
20 - 40 °C
 
2.5
Curtains and delicate clothing, dresses, skirts, shirts and blouses.
❉3)
Ye s
❉❉—— —
❉❉
1000
1)
Wool
20 - 40 °C2.0
Only woollens, labelled with the Woolmark and identified as machine washable. 
This programme (40°C) is tested and approved by The Woolmark Company for machine 
washable wool.
—
Ye s
❉—— — —
❉❉
1000
1)
Handwash
20 - 40 °C2.0
Textiles made of silk, linen, wool and viscose marked as “handwashable”.
This programme (40°C) is tested and approved by The Woolmark Company for handwashable 
wool.
—
Ye s
❉—— — —
❉❉
400
1)
Jeans
20 - 60 °C
 
7.0
Normally soiled cotton jeanswear and garments made of robust jeanslike material such as 
trousers and jackets.
❉
Ye s
❉❉❉——
❉❉
max.
Big Items
20 - 60 °C
 
3.0
Blankets made of synthetic fibres; bed covers filled with feathers, polyester or other artificial 
fibers; sleeping bags, bathmats and similar items.
❉3)
Ye s
❉❉——
❉❉❉
1000
1)
Outdoor
20 - 30 °C
 
 
3.5
Normally soiled and sweaty sportswear made of cotton jersey or microfibers.
This programme includes a prewash cycle – you can add detergent also to the prewash chamber. Do 
not add any softener.
—
Ye s
—— —
❉❉❉❉
max.
SuperEco
20 - 60 °C8.0
Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc. made of 
cotton and linen.
Offers highest economy in energy consumption by prolonged washing duration. Ideal to be run 
overnight to additionally profit from the more favourable energy rates. To avoid noise of spinning at 
night, set spin speed to “0” and start spin programme in the morning, or define programme start 
with “Start delay ” accordingly.
—
Ye s
❉—— —
❉❉❉
max.
Daily load
20 - 60 °C
 
6.0
Slightly to normally soiled textiles made of cotton and/or synthetics.
—
Ye s
❉——
❉❉❉❉
max.
Speed 15
20 - 30 °C3.0
Refreshes briefly worn outer clothing made of cotton, artificial fibers and blends with cotton.
—
Ye s
❉—— — —
❉❉
max.
Rinse & Spin
——
8.0
Same as the last rinse and the final spin in the “Cotton” programme.
——
❉—— —
❉❉❉
max.
Spin
——
8.0
In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.
—— — — — — —
❉❉
max.
A. Programme selector
B. Display
C. “Temperature” button
D. “Variable spin” button
E. “Start delay” button
F. “Start (Pause)” button
G. “Reset/Drain” button
H. “Favourites” button
I. Programme sequence indication
J. “Child lock” indication
K. “Detergent overdosage” indication
L. Red failure indications
Add garment Programme
in processProgramme
finished
F
G
AB
L
KC
D
E
H
I
}
J
30106213GB.fm  Page 1  Wednesday, September 3, 2008  2:48 PM
Black process 45.0° 150.0 LPI 
 
						

							5019 301 06213
Whirlpool is a registered trademark of Whirlpool USA
Add detergent as indicated on the front page and as described in 
the chapter “Detergent and Additives” in your Instructions for Use.
Turn the programme selector to the desired programme; the light 
of the 
“Start (Pause)” button   blinks. The 
temperature and 
spin speed indicated on the display can be altered by pressing the 
“Temperature” button   or the “Variable spin” button .
When the combination of programme and additional option(s) is 
not possible, the indication lights switch off automatically. 
Unsuitable combinations of options are deselected automatically.
“Prewash” button
 Only for heavily soiled loads (for example sand, granular dirt) 
sensible. Increases the cycle time by approximately 15 min.
 Do not use liquid detergent for the main wash when activating 
the “Prewash” option.
“Clean+” button
 Choose this option if you use an in-wash additive for stain removal 
(powder, for example “Vanish”) - it will optimize the additive’s 
efficiency to get better wash performance and stain removal.
 Selectable for programmes “Cotton” and “Synthetics”; choose 
temperature of 30 or 40°C and use with maximum load.
 Add an appropriate amount of in-wash additive for stain 
removal (powder) to the main wash chamber, together with 
your detergent (only use powder detergent with this option). 
Respect the manufacturer’s dosing instructions.
 Prolongs the programme by approx. 10 to 15 minutes.
 Appropriate for use of stain removers and bleaches on oxygen 
basis. 
Chlorine or perborate bleaches must not be used!“Easy ironing” button
 Can be used together with “Cotton”, “Synthetics” and “Daily 
load” programmes to make ironing easier.
 Increases the water quantity and the clothes are spun very gently.
“Intensive rinse” button
 More water is added and rinse cycle is prolonged.
 This option is particularly suitable for areas with very soft water or 
for washing baby linen, and helps people with allergies.
“ Variable spin” button
 Every programme has a predefined spin speed.
 Press the button to set another spin speed.
 If spin speed “0” is selected, the final spinning is cancelled but 
intermediate spin peaks remain during rinse. The water is 
drained out only.
 If you select “Rinse hold”  , the laundry remains in the last 
rinse water without progressing to the final spin cycle, to avoid 
creasing and prevent colours from changing. To activate the 
“Rinse hold”, press the “Variable spin” button repeatedly until the 
“Rinse hold” symbol   on the “Variable spin” button lights up.
- The wash programme stops to “Rinse hold” when the 
“Rinse hold” symbol   on the “Variable spin” button 
blinks; the light of 
“Start (Pause)” blinks as well.
- To terminate the “Rinse hold” by draining the water, 
without any spinning, press the 
“Start (Pause)” button.
- To terminate the “Rinse hold” by spinning the laundry, press 
the “Variable spin” button to select the desired spin speed 
and then 
“Start (Pause)” to start the spin cycle.
- Do not leave the laundry to soak for too long in the “Rinse hold”.
If there is a programme setting which you use frequently, the 
appliance offers the possibility to save one setting for each 
programme so that it can be used again by just pushing one button.CONSUMPTION DATA
Programme
Te m p e r a t u r e
(°C)
Load
(kg)
Wa t e r
(l)
Energy
(kWh)
Approx. Programme Duration
(hours : minutes)
*
White Cotton / Antibacterial 95 8.0 82
**2.40 2:10
Cotton
***
60
8.0
64
1.36
2:20
Cotton 40 8.0 77 0.75 2:05
Synthetics 60 3.5 46
**0.85 1:35
Synthetics 40 3.5 42 0.50 1:20
Delicates 30 2.5 60 0.40 0:45
Wool 40 2.0 60 0.60 0:45
Handwash 40 2.0 45 0.60 0:40
Jeans 40 7.0 95 0.80 2:21
Big Items 60 3.0 74 0.75 1:30
Outdoor 30 3.5 54 0.55 1:34
SuperEco 60 8.0 75 0.95 4:00
Daily load 40 6.0 73 0.60 1:00
Speed 15 30 3.0 30 0.20 0:15
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home 
may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
*The time indicated on the display can deviate from the values in the table, because it takes into account the operation conditions 
applicable at that time.
**To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
***Reference Programme for Energy Label.ADD DETERGENTS, CLOSE THE DOOR 
AND SELECT THE PROGRAMMESELECT ANY DESIRED OPTION
SAVE YOUR FAVOURITE PROGRAMMES
 Select the desired programme, temperature, spin speed and 
option(s), push and hold the 
“Favourites” button   for at 
least 3 seconds. The lamp next to 
“Favourites”  shortly 
blinks and then lights up - the programme setting is saved.
Next time you want to use your individual programme setting, 
select the programme, push the 
“Favourites” button   and 
start by pushing 
“Start (Pause)” .
If you want to replace the saved programme setting by 
another one, proceed as already described above.
The “Start delay”   allows to run the machine at the consumer’s 
convenience, for example at night when electricity is cheaper.
 Select programme, temperature, spin speed and options.
 Press the “Start delay ” button to select a delay time from 0:30 
to 23:00 hours.
Press the 
“Start (Pause)” button  . 
The countdown of the delay time begins; the clock symbol next to 
the delay time and the colon between hours and minutes blink.
 The time delay indication disappears when the programme 
starts and it is replaced by the remaining programme time.
To cancel the “Start delay ”
..before you press the “Start (Pause)” button:
 Select another programme or press the 
“Reset/Drain” 
button .
..after having pressed the “Start (Pause)” button:
Press the 
“Reset/Drain” button   for at least 3 seconds; the 
start delay time disappears from the display.
Before starting a programme, the symbol lights to show that the 
door can be opened to add more washing. As soon as you press 
“Start (Pause)”, the door will lock until the end of the 
programme and must on no account be forced open. In case you 
have to open it urgently during a running programme, refer to 
“Reset a running programme before the end”.
If you try to start a wash programme and the door is not properly 
closed, the “Add garment” indication will blink.
Open the tap and press the 
“Start (Pause)” button ; the 
blinking 
“Start (Pause)” button light becomes constant. The 
“Add garment” indication goes out, and the lit bubbles indicate that 
the programme is in process. In some phases, the remaining 
programme time is newly calculated - if this is the case, the “6
th 
sense” indication   on the display will fade.
Activating the child lock prevents children from starting a wash 
cycle or changing the settings of a running programme. The child 
lock cannot be activated or deactivated when the programme 
selector is in the “Off/O” position. To activate the child lock:  Turn the programme selector to a programme position, or run 
a programme as usual. 
 Press the “Temperature”   and the “Variable spin”   
button simultaneously for at least 3 seconds. The “Child lock” 
symbol   will shortly blink and then light up to indicate 
that the child lock is active.
The programme setting cannot be changed anymore; the only change 
possible is to switch the washer off by turning the programme selector 
to the “Off/O” position. To deactivate the child lock:
 Press again the 2 buttons marked with the key symbol   
simultaneosuly for at least 3 seconds.
If one of the red failure indications on the display lights up, refer to 
the “Troubleshooting Guide” in your “Instructions for Use”.
 The display shows “End”, and the “Programme finished” 
indication   lights up.
1. Turn the programme selector to the “Off/O” position.
2. Close the water tap.
3. Open the door and unload the machine.
 Leave the door ajar to allow the drum to dry.
 If you do not turn the programme selector to the “Off/O” 
position, the washing machine will switch off automatically 
after a few minutes.
This indication lights up when you added too much detergent. It 
can appear either when a wash programme is finished, or when too 
much foam interrupted the wash programme - in this case refer to 
the “Troubleshooting Guide” in your Instructions for Use to 
manage the programme interruption.
1. Press the 
“Start (Pause)” button   to pause the 
programme. The light blinks.
2. Select the new programme, temperature, any options and 
another spin speed if you want.
3. Press the 
“Start (Pause)” button   again. The new 
programme continues at the same position where the 
previous programme was interrupted. Do not add detergent 
for this programme.
The 
“Reset/Drain” button   cancels a programme before the end.
Press the 
“Reset/Drain” button   for at least 3 seconds; an 
animation appears on the display. Any existing water is drained 
out before the door can be opened.
START DELAY“ADD GARMENT” INDICATION PROGRAMME STARTCHILD LOCK
RED FAILURE INDICATIONS PROGRAMME ENDDETERGENT OVERDOSAGE INDICATIONCHANGE PROGRAMME AND/OR OPTIONS 
AFTER PROGRAMME STARTRESET A RUNNING PROGRAMME BEFORE 
THE END
30106213GB.fm  Page 2  Wednesday, September 3, 2008  2:48 PM
Black process 45.0° 150.0 LPI