Whirlpool Awod As128 Programme Chart Manual

							GB PROGRAMME CHART
5019 301 06102
Whirlpool is a registered trademark of Whirlpool USA
The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company 
for the washing of Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments 
are washed according to the instructions on the garment label and those issued in this programme chart. 
M0702
❉: optional / Yes : dosing required1)
For improved garment care, spin speed is restricted in these programmes.
2)
Only selectable within the temperature range of 40 to 60°C.
Programme
Te m p e -
rature
Care
Labels
Max 
Load
kg
Type of wash/Notes
- For temperature selection, respect the 
manufacturer’s recommendations on the 
care label
Detergents and additives
Special options
Start
delay
Inicio
diferido
Spin
Pre-
wash
Main
wash
Softener
Big
items
Edredón
Steam stain
removal
2)
2)
Steam
Sanitization
2)
2)
Pre-
wash
Prelav.
Intensive
rinse
Aclar./enx.
intensivo
Rinse
hold
Pa r o  c u b a
llena/cheia
Va r i a b l e
spin
Centrif.
Max
Spin
Speed
rpm
Cotton
(Anti-bacterial)
20 - 95 °C
 
8.0
Normally to heavily soiled bed linen, table linen and 
underwear, towels, shirts etc. made of cotton and 
linen.
At a temperature of 80°C or more, this programme 
eliminates bacteria, ensuring sanitization of your 
laundry. The bacteria removal efficiency has been 
tested following a similar methodology to the NF EN 
13697 standard of Nov. 2001.
❉
Ye s
❉—
❉❉❉❉❉❉❉
max.
Synthetics
Sintéticos
20 - 60 °C
 
 
3.5
Normally soiled blouses, shirts, overalls etc. made of 
polyester (Diolen, Trevira), polyamide (Perlon, 
Nylon) or blends with cotton.
❉
Ye s
❉❉ ❉ ❉ ❉ ❉ ❉ ❉❉
1000
1)
Daily load
20 - 60 °C
 
6.0
Slightly to normally soiled textiles made of cotton 
and/or synthetics.
—
Ye s
❉—— ——
❉❉❉❉
max.
Quick wash
(30 min)
Rápido 
(30 min)
20 - 30 °C
6.0
Shortly worn outer clothing made of cotton, 
polyester, polyamide and blends with cotton.
—
Ye s
❉—— ———
❉❉❉
max.
Delicates
Delicados
20 - 40 °C
 
2.5
Curtains and delicate clothing, dresses skirts, shirts 
and blouses.
❉
Ye s
❉—— —
❉—
❉❉❉
1000
1)
Handwash &
Wool
A mano/mão
& Lana/lã
20 - 40 °C
2.0
Textiles made of silk, linen, wool and viscose marked 
as “handwashable”, or woollens labelled with the 
Woolmark and identified as machine washable.
This programme (40°C) is tested and approved by 
The Woolmark Company for machine washable and 
handwashable wool.
—
Ye s
❉—— ———
❉❉❉
400
1)
20 - 60 °C
 
8.0
Slightly to normally soiled bed linen, table linen and 
underwear, towels, shirts etc. made of cotton and 
linen.
Offers highest economy in energy consumption by 
prolonged washing duration. Ideal to be run overnight to 
additionally profit from the more favourable energy 
rates. To avoid noise of spinning at night, set spin speed 
to “0” and start spin programme in the morning, or 
define programme start with “Start delay ” accordingly.
—
Ye s
❉—— ——
❉❉❉❉
max.
Steam Refresh
—
1.0
Clean and dry laundry items made of cotton and/or 
synthetics which were already used. 
Refreshes, reduces smells, moderates creasing and 
makes the items ready to wear or use within 20 
minutes. After programme end, immediately put the 
laundry on hangers for 10 minutes before using. During 
this programme “St” appears on the display.
———— — — — — —
❉——
Intensive Spin
Centrif. 
Intensivo
——
8.0
In this programme spinning is intensive. Same as the 
spin cycle in the “Cotton” programme.
———— — — — — —
❉❉
max.
Rinse & Spin
Aclarar/enx. & 
Centrif.
——
8.0
Same as the last rinse and the final spin in the “Cotton” 
programme.
——
❉—— ——
❉❉❉❉
max.
Drain
———
Drain only - no spinning. Alternative method of 
terminating programme after “Rinse Hold”. Press 
“Drain/Reset (3sec)” and then “Start/Pause” to start the 
“Drain” programme.
———— — — — — — —— —
A. “On/Off” button
B. Programme selection buttons
C. Option buttons
D. “Temperature” button
E. “Start delay” button
F. “Variable spin” button
G. “Start/Pause” button
H. “Drain/Reset (3sec)” button
I. Display
J. Programme sequence indication
K. “Door open” indication
L. “Child lock” indication
Your washing machine is equipped with 
automatic safety functions which detect 
and diagnose faults at an early stage 
and react appropriately, e.g.:
M. “Water tap closed” indication
N. “Clean pump” indication
O. “Service” indication
G
H
A
ON
I B
}
C
D
E
F J
K
M}
L
C
30106102GB.fm  Page 1  Friday, September 28, 2007  6:42 PM
Black process 45.0° 100.0 LPI 
 
						

							5019 301 06102
Whirlpool is a registered trademark of Whirlpool USA
Add detergent as indicated on the front page and as 
described in the chapter “Detergent and Additives” in 
your Instructions for Use.
1. Push the 
“On/Off” button . The blue light circle 
signals that the washer is switched on.
2. Select the 
desired programme by pushing the 
corresponding programme button; it is marked by a 
blue light.
3. The 
temperature and 
spin speed indicated on the 
display can be altered by pressing the “Temperature” 
button or the “Variable spin” button.
When the combination of programme and additional 
option(s) is not possible, the indication lights switch off 
automatically. Unsuitable combinations of options are 
deselected automatically.
“Big Items” button
 Select this option for washing big laundry items such as 
blankets made of synthetic fibres, bed covers filled 
with feathers or artificial fibres, sleeping bags, 
bathmats and similar.
“Steam stain removal” button
 Treats the laundry with hot steam during the wash 
cycle in order to help removing stains.
 Selectable for laundry made of cotton and/or 
synthetics within temperature range of 40 to 60°C.
“Steam sanitisation” button
 Eliminates bacteria and helps sanitizing the laundry.
 Appropriate for cotton and/or synthetic laundry items with 
care label   within temperature range of 40 to 60°C.
 Prolongs the programme by approx. half an hour to an 
hour, depending on the load size.“Prewash” button
 Only for heavily soiled loads (for example sand, 
granular dirt) sensible. Increases the cycle time by 
approximately 15 min.
 Do not use liquid detergent for the main wash when 
activating the Prewash option.
“Intensive rinse” button
 More water is added and rinse cycle is prolonged.
 This option is particularly suitable for areas with very 
soft water or for washing baby linen, and helps people 
with allergies.
“Rinse hold” button
 The laundry remains in the last rinse water without 
progressing to the final spin cycle to avoid creasing and 
prevent colours from changing.
 This option is particularly recommended for the 
programmes “Synthetics”, “Daily load” and “Delicates”.
 It is particularly useful if you want to postpone spinning 
to a later time, or if you want to drain only.
 If you select “Rinse hold”, do not leave the laundry to 
soak for too long.
Note: The programme stops to “Rinse hold” at the time 
the “Rinse hold” symbol on the display lights up. The blue 
light under the 
“Start/Pause” button   flashes.
Terminate the “Rinse hold” option:
 Press the 
“Start/Pause” button ; the programme 
will terminate automatically with the final spin cycle for 
the present wash programme.
 If you do not wish to spin the clothes, push the 
“Drain/
Reset (3sec)” button
  and then the 
“Start/
Pause” button  to start the Drain programme.CONSUMPTION DATA
Programme
Te m p e r a t u r e
(°C)
Load
(kg)
Wa t e r
(l)
Energy
(kWh)
Approx. Programme Duration
(hours : minutes)
*
Cotton (Anti-bacterial) 95 8.0 82
**2.40 2:10
Cotton
***60 8.0 69 1.36 2:20
Cotton 40 8.0 77 0.85 2:05
Synthetics 60 3.5 48
**0.95 1:35
Synthetics 40 3.5 44 0.55 1:20
Daily load 40 6.0 79 0.70 1:00
Quick wash (30 min) 30 6.0 72 0.35 0:30
Delicates 30 2.5 60 0.45 0:50
Handwash / Wool 40 2.0 45 0.65 0:40
Handwash / Wool 30 2.0 45 0.35 0:36
60 8.0 75 0.95 4:00
Steam Refresh — 1.0 1.0 0.20 0:10
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home 
may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
*The time indicated on the display can deviate from the values in the table, because it takes into account the operating conditions 
applicable at that time.
**To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
***Reference Programme for Energy Label.ADD DETERGENTS, CLOSE THE DOOR 
AND SELECT THE PROGRAMMESELECT ANY DESIRED OPTION
“ Variable spin” button
 Every programme has a predefined spin speed.
 Press the button to set another spin speed.
 If spin speed “0” is selected, the final spinning is 
cancelled but intermediate spin peaks remain during 
rinse. The water is drained out only.
The “Start delay” allows to run the machine at the 
consumer’s convenience, for example at night when 
electricity is cheaper. Do not use liquid detergent when 
activating the “Start delay”.
 Select programme, temperature, spin speed and options.
 Press the “Start delay ” button to select the delay time 
up to 23 hours.
 Press the 
“Start/Pause” button  . 
The countdown of the delay time begins; the clock 
symbol next to the delay time and the dot between 
hours and minutes flash.
 The time delay indication disappears when the 
programme starts and it is replaced by the remaining 
programme time.
 Once having pressed the 
“Start/Pause” button  , 
the number of hours preselected can be reduced by 
pressing and holding the “Start delay ” button. From 1 
hour on, the delay time can also be reduced by minutes.
To cancel the “Start delay ”
..before you press the “Start/Pause” button:
 Select another programme or press the 
“Drain/Reset 
(3sec)” button  .
..after having pressed the “Start/Pause” button:
 Press the 
“Drain/Reset (3sec)”  button   for at 
least 3 seconds - the start delay time disappears from the display.
Open the tap and press the 
“Start/Pause” button . 
The blue light under the 
“Start/Pause” button   is on. 
The programme sequence indicator shows the current 
programme phase, running from left to right through 
Wash, Rinse, Spin/Drain.
Before starting and after end of a programme, the symbol 
lights to show that the door can be opened. As long as a 
wash programme is running, the door remains locked and 
must on no account be forced open. In case you have an 
urgent need to open it during a running programme, refer 
to “Cancel (Reset) a running programme before the end”.You can lock the buttons of the control panel against 
improper use (e.g. by children).
 Press the temperature and the spin speed button 
simultaneously and hold them for at least 3 seconds. 
The key symbol on the display lights up.
 To unlock the buttons again: proceed in the same way.
“Water tap closed”
The appliance has no or insufficient water supply. Open 
the water tap; if the indication still lights up, refer to the 
“Troubleshooting Guide” in the Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the drain 
hose is kinked or the filter must be cleaned; in the latter case 
refer to the Instructions for Use (“Removing the Filter”).
“Service”
Lighting up of the “Service” indication can be caused by a 
fault in an electrical component. Refer to the 
“Troubleshooting Guide” in your Instructions for Use; if 
the fault persists, contact our After Sales Service.
 The symbols of the programme sequence indicator 
are dark, and the “Door open” symbol   lights up.
1. Switch the machine off by pushing 
“On/Off”.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
1. Press the 
“Start/Pause” button   to pause the 
programme. The light flashes.
2. Select the new programme, temperature, any options 
and another spin speed if you want.
3. Press the 
“Start/Pause” button   again. The new 
programme continues at the same position where the 
previous programme was interrupted. Do not add 
detergent for this programme.
The 
“Drain/Reset (3sec)” button   cancels 
a programme before the end.
 Press the 
“Drain/Reset (3sec)” button 
 for at least 3 seconds. Any existing 
water is drained out before the door can be opened. 
Caution! The washing might still be hot.START DELAYPROGRAMME START“DOOR OPEN” INDICATION
CHILD LOCKRED INDICATIONS ON THE DISPLAYPROGRAMME ENDCHANGE PROGRAMME AND/OR OPTIONS 
AFTER PROGRAMME STARTCANCEL (RESET) A RUNNING 
PROGRAMME BEFORE THE END
30106102GB.fm  Page 2  Friday, September 28, 2007  6:42 PM
Black process 45.0° 100.0 LPI