Whirlpool Awod 8500 Programme Chart Manual
Have a look at the manual Whirlpool Awod 8500 Programme Chart Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 415 Whirlpool manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
GB PROGRAMME CHART 5019 301 06061 Whirlpool is a registered trademark of Whirlpool USA ❉: optional / Yes : dosing required1) For improved garment care, spin speed is restricted in these programmes. The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the instructions on the garment label and those issued in this programme chart. M0512 Programme Te m p e - rature Care Labels Max Load kg Type of wash/Notes - For temperature selection, respect the manufacturer’s recommendations on the care label Detergents and additives Special options Max Spin Speed rpm Pre- wash Main wash Softener Eco Pre- wash Start delay Easy ironing Intensive rinse Rinse hold Va r i a b l e spin Cotton 70 - 95 °C 8.0 Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen. At a temperature of 80°C or more, this programme eliminates bacteria, ensuring sanitization of your laundry. The bacteria removal efficiency has been tested following a similar methodology to the NF EN 13697 standard of Nov. 2001. ❉ Ye s ❉❉❉❉❉ ❉ ❉ ❉ max. Coloured Cotton 20 - 60 °C 8.0 Synthetics 20 - 60 °C 3.5 Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton. ❉ Ye s ❉❉❉❉❉ ❉ ❉ ❉ 1000 1) Daily load (60 min) 20 - 60 °C 6.0 Slightly to normally soiled textiles made of cotton and/or synthetics. — Ye s ❉—— ❉❉ ❉ ❉ ❉ max. Quick wash (30 min) 20 - 30 °C 6.0 Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton. — Ye s ❉—— ❉—— ❉❉ max. Delicates 20 - 40 °C 2.5 Curtains and delicate clothing, dresses skirts, shirts and blouses. ❉ Ye s ❉— ❉❉—— ❉❉ 1000 1) Wool 20 - 40 °C 2.0 Only woollens, labelled with the Woolmark and identified as machine washable. This programme (40°C) is tested and approved by The Woolmark Company for machine washable wool. — Ye s ❉—— ❉—— ❉❉ 1000 1) Handwash (Lingerie) 20 - 40 °C 2.0 Textiles made of silk, linen, wool and viscose marked as “handwashable”. This programme (40°C) is tested and approved by The Woolmark Company for handwashable wool. Up to a temperature of 30°C, this cycle is particularly suitable to treat delicate lingerie (use of a laundry net strongly recommended). — Ye s ❉—— ❉—— ❉❉ 400 1) Rinse & Spin —— 8.0 Same as the last rinse and the final spin in the “Cotton” programme. —— ❉—— ❉— ❉❉❉ max. Spin —— 8.0 In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme. —— ——— ❉——— ❉ max. Gentle Spin —— 2.0 In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme. —— ——— ❉——— ❉ 1000 1) Drain ——— Drain only - no spinning. Alternative method of terminating programme after “Rinse Hold”. —— ————— ———— A. “Door open” indication This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.: B. “Service” indication C. “Water tap closed” indication D. “Clean pump” indication E. Programme selector F. “Start/Pause” button G. “Variable spin” button H. Programme sequence indicator I. “Reset” button J. “Start delay” button K. “Temperature” button L. Display D HC F I EA J B K G L 30106061GB.fm Page 1 Wednesday, June 13, 2007 4:06 PM Black process 45.0° 100.0 LPI
5019 301 06061 Whirlpool is a registered trademark of Whirlpool USA Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use. 1. Turn the programme selector to the desired programme. The display shows the programme duration in hours and minutes as well as the predefined temperature. The “Start/Pause” button flashes. 2. The temperature can be altered by pressing the “Temperature” button. 3. The indication lamp of the predefined spin speed lights up; in case you want to set another spin speed, press the “Variable spin” button. Push the button(s) of any option(s) desired - the respective indication lights up. When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically. “Eco” button With a modified temperature profile and a slightly prolonged washing duration, the optimum combination of excellent washing result and even lower energy consumption is achieved.“Prewash” button Only for heavily soiled loads (for example sand, granular dirt) sensible. Increases the cycle time by approximately 15 min. Do not use liquid detergent for the main wash when activating the Prewash option. “Easy ironing” button Can be used together with “Cotton”, “Synthetics” and “Daily load” programmes to make ironing easier. Increases the water quantity and the clothes are spun very gently. “Intensive rinse” button More water is added and rinse cycle is prolonged. This option is particularly suitable for areas with very soft water, washing baby linen and helps people with allergies. “Rinse hold” button The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing. This option is particularly recommended for the programmes “Synthetics”, “Daily load” and “Delicates”. It is particularly useful if you want to postpone spinning to a later time, or if you want to drain only. If you select “Rinse hold”, do not leave the laundry to soak for too long. Note: The programme stops to “Rinse hold” at the time the “Anticrease” light in the programme sequence indicator is on. The indication lamp next to the “Start/Pause” button flashes.CONSUMPTION DATA Programme Te m p e r a t u r e (°C) Load (kg) Wa t e r (l) Energy (kWh) Approx. Programme Duration (hours : minutes) * Cotton / Antibacterial 95 8.0 82 **2.40 2:10 Cotton 60 8.0 77 1.52 2:10 Cotton with “Eco” ***60 8.0 69 1.36 2:20 Cotton 40 8.0 77 0.85 2:05 Synthetics 60 3.5 48 **0.95 1:35 Synthetics 40 3.5 44 0.55 1:20 Daily load 40 6.0 79 0.70 1:00 Quick wash 30 6.0 72 0.35 0:30 Delicates 30 2.5 60 0.45 0:50 Wool 40 2.0 60 0.65 0:45 Handwash 40 2.0 45 0.65 0:40 Handwash (Lingerie) 30 2.0 45 0.35 0:36 Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash. *The time indicated on the display can deviate from the values in the table, because it takes into account the household conditions applicable at that time. **To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out. ***Reference Programme for Energy Label.ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMMESELECT ANY DESIRED OPTION Terminate the “Rinse hold” option: Press the “Start/Pause” button; the programme will terminate automatically with the final spin cycle for the present wash programme. If you do not wish to spin the clothes, turn the programme selector knob to the “Drain” programme and press the “Start/Pause” button. “ Variable spin” button Every programme has a predefined spin speed. Press the button to set another spin speed. If spin speed “0” is selected, the final spinning is cancelled but intermediate spin peaks remain during rinse. The water is drained out only. The “Start Delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating the “Start Delay”. Select programme, temperature and options. Press the “Start Delay ” button to select the delay time by 1 to 23 hours; Press the “Start/Pause” button. The indication light over the “Start Delay ” button as well as the dot between hours and minutes of the delay time indicated begin to flash and the countdown of the delay time starts. The time delay indication disappears when the programme starts and it is replaced by the remaining programme time. Once having pressed the “Start/Pause” button, the number of hours preselected can be reduced by pressing and holding the “Start Delay ” button. From 1 hour on, the delay time can also be reduced in steps of 10 minutes. To cancel the “Start Delay ” ..before you press the “Start/Pause” button: Turn the programme selector to another position or press the “Reset” button. ..after having pressed the “Start/Pause” button: Press the “Reset” button for at least 3 seconds - the start delay time disappears from the display. Open the tap and press the “Start/Pause” button. The indication lamp next to the “Start/Pause” button lights up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/ Drain. The display shows the remaining programme time. Due to variations in load and temperature of inlet water, the remaining time is newly calculated in certain programme phases. If this is the case, an animation appears on the display.Before starting and after end of a programme, the lamp lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”. “Service” Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your Instructions for Use; if the fault persists, contact our After Sales Service. “Water tap closed” The appliance has no or insufficient water supply. Open the water tap; if the indication still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use. “Clean pump” Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned; in the latter case refer to the Instructions for Use (“Removing the Filter”). All the lights of the programme sequence indicator are off, and the “Door open” indication lights up. 1. Turn the programme selector to the “Off/O” position. 2. Close the water tap. 3. Open the door and unload the machine. 4. Leave the door ajar to allow the drum to dry. 1. Press the “Start/Pause” button to pause the programme. The light flashes. 2. Select the new programme, temperature, any options and another spin speed if you want. 3. Press the “Start/Pause” button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme. The “Reset” button cancels a programme before the end. Press the “Reset” button for at least 3 seconds. Any existing water is drained out before the door can be opened.START DELAYPROGRAMME START “DOOR OPEN” INDICATIONRED INDICATIONSPROGRAMME ENDCHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME STARTCANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END 30106061GB.fm Page 2 Wednesday, June 13, 2007 4:06 PM Black process 45.0° 100.0 LPI