Whirlpool Awod 41105 Programme Chart Manual

							GB AWO/D 41105 PROGRAMME CHART❉: optional / Yes : dosing required1)
 For improved garment care, spin speed is restricted to 400 rpm in this programme.
5019 301 10283
Whirlpool is a registered trademark of Whirlpool USA
Programme
Care
Labels
Type of wash/Notes
- for temperature selection, respect the manufacturer’s recommendations on the care label
Max 
Load
kg
Detergents and additives
Special options
Spin
Speed
rpm
Pre-
wash
Main 
Wa s h
Softener
Intensive
rinse
Spin
speed
reduction
Cotton with prewash
95 °C
95 °CHeavily soiled, long wearing and temperature stable textiles in cotton and linen (bed linen, table 
linen, underwear, shirts etc.).
5.0 Yes Yes
❉❉ ❉
800
Cotton
40 - 60 - 95 °C
40 - 60 - 95 °C
 
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton 
and linen.
5.0
—Ye s
❉❉ ❉
800
Synthetics with prewash
60 °C
60 °CHeavily soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, 
Nylon) or blends with cotton.
2.5 Yes Yes
❉❉ ❉
800
Synthetics
30 - 40 - 60 °C
30 - 40 - 60 °C
 
 
Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide 
(Perlon, Nylon) or blends with cotton.
2.5
—Ye s
❉❉ ❉
800
Delicates30 °C
30 °C
 
Curtains and delicate clothing, dresses skirts, shirts and blouses.
1.5
—Ye s
❉
—
❉
800
Quick wash
30 °C
30 °CShortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton.
3.0 — Yes
❉
—
❉
800
Wo o lCold - 40 °C
 - 40 °COnly woollens with a felt-free finish, labelled with the woolmark and identified as machine 
washable.
1.0 — Yes
❉
—
❉
800
Handwash
40 °C
40 °CTextiles made of linen, silk, wool and viscose marked as “handwashable”.
1.0 — Yes
❉
——
400
1)
Lingerie30 °C
30 °CThis cycle is particularly suitable to treat delicate lingerie (use of a laundry net strongly 
recommended).
1.0 — Yes
❉
——
400
1)
Rinse & Spin
—
Same as the last rinse and the final spin in the “Cotton” programme.
5.0 — —
❉❉ ❉
800
Spin
—
In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.
5.0 — — — —
❉
800
Gentle Spin
—
In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.
1.0 — — — —
❉
800
Drain
—
Water is drained only without any spinning.
——— — — — —
A. “Door open” indication
This washing machine is equipped with 
automatic safety functions which 
detect and diagnose faults at an early 
stage and react appropriately, e.g.:
B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication
E. Programme selector
F. “Start/Pause” button
G. Programme sequence indicator
H. “Reset” button
D
GC
F
H
E
B A
 
						

							5019 301 10283
Whirlpool is a registered trademark of Whirlpool USA
Add detergent as indicated on the front page and as 
described in your Instructions for Use. Close the 
door and turn the 
programme selector to the 
desired programme and temperature. The indication 
lamp n ext t o the 
“Start /Pause” button   flashes.
Push the button(s) of any option(s) desired - the 
respective indication lamp lights up.
When the combination of programme and additional 
option(s) is not possible, the indication lights switch off 
automatically. Unsuitable combinations of options are 
deselected automatically.“Intensive rinse” button
 More water is added and rinse cycle is prolonged.
 This option is particularly suitable for areas with 
very soft water, washing baby linen and helps 
people with allergies.
“Spin speed reduction” button
 Reduces the predetermined automatic maximum 
spin speed to treat your laundry more gently.CONSUMPTION DATA
Programme
Te m p e r a t u r e  
(°C)
Load
(kg)
Wat e r
(l)
Energy
(kWh)
Approx. Programme
Duration
(hours : minutes)
*
Cotton 95 5.0 49
**1.90 2:00
Cotton
***60 5.0 44 0.85 2:20
Cotton 40 5.0 44 0.60 2:00
Synthetics 60 2.5 50
**0.70 1:30
Synthetics 40 2.5 45 0.55 1:15
Delicates 30 1.5 50 0.50 0:45
Quick wash 30 3.0 40 0.40 0:30
Wool 40 1.0 55 0.60 0:45
Handwash 40 1.0 45 0.60 0:40
Lingerie 30 1.0 45 0.50 0:40
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption 
data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, 
the load and the type of wash.
*
The remaining time indicator can deviate from the values in the table, because it takes into account the household 
conditions applicable at that time.
**
To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains 
the water out.
***
Reference Programme for Energy Label.ADD DETERGENTS, CLOSE THE DOOR 
AND SELECT THE PROGRAMMESELECT ANY DESIRED OPTION
Open the tap and press the 
“Start/Pause” 
button . The indication lamp next to the 
“Start/
Pause” button  lights up. The programme 
sequence indicator shows the current programme 
phase, running from left to right through Wash, Rinse, 
Spin/Drain.
When the programme phase is finished, the 
corresponding indication goes out.
Before starting and after end of a programme, the 
lamp lights to show that the door can be opened. As 
long as a wash programme is running, the door 
remains locked and must on no account be forced 
open. In case you have an urgent need to open it 
during a running programme, refer to “Cancel 
(Reset) a running programme before the end”.
“Service”
Lighting up of the “Service” indication can be caused 
by a fault in an electrical component. Refer to the 
“Troubleshooting Guide” in your “Instructions for 
Use”; if the fault persists, contact our After Sales 
Service.
“Water tap closed”
The appliance has no or insufficient water supply. 
Open the water tap; if the indication still lights up, 
refer to the “Troubleshooting Guide” in the 
Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the 
drain hose is kinked or the filter must be cleaned; in 
the latter case refer to the Instructions for Use 
(“Removing the Filter”). All the lights of the programme sequence 
indicator are off, and the “Door open” 
indication   lights up.
1. Turn the programme selector to the “Off/O” 
position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
1. Press the 
“Start/Pause” button   to pause 
the programme. The light flashes.
2. Select the new programme (with temperature), 
any options and another spin speed if you want.
3. Press the 
“Start/Pause” button   again. The 
new programme continues at the same position 
where the previous programme was interrupted. 
Do not add detergent for this programme.
The 
“Reset” button   cancels a programme 
before the end.
Press the 
“Reset” button   for at least 3 
seconds. Any existing water is drained out 
before the door can be opened.PROGRAMME START“DOOR OPEN” INDICATIONRED INDICATIONS
PROGRAMME ENDCHANGE PROGRAMME AND/OR OPTIONS 
AFTER PROGRAMME STARTCANCEL (RESET) A RUNNING 
PROGRAMME BEFORE THE END