Home > Whirlpool > Washing Machine > Whirlpool Awoc 61200 Programme Chart Manual

Whirlpool Awoc 61200 Programme Chart Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Whirlpool Awoc 61200 Programme Chart Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 415 Whirlpool manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							A
    B
    H
    FG
    C
    D
    J
    I
    E
    GB                                                                      \
                PROGRAMME CHART
    Whirlpool is a registered trademark of Whirlpool USA.
    5019 301 01215
    E. Programme selectorF. “Start/Pause” buttonG. Spin speed selectorH. Programme sequence indicatorI. “Reset” buttonJ. “Start delay ” button
    Acustic noise level :Washing   -    59 dB(A) / 1 pWSpinning  - 1400 rpm  77 dB(A) / 1 pW - 1200 rpm  75 dB(A) / 1 pW - 1000 rpm  74 dB(A) / 1 pW
    A. “Door open” indication
    This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:
    B. “Service” indication
    C. “Water tap closed” indication
    D. “Clean pump” indication
    ProgrammeCare LabelsMax.Load
    kg
    Type of wash / Notes
    - respect the manufacturer's recommendations on the care label
    Detergents and AdditivesSpecial optionsMaxSpin Speed
    rpm
    Pre- washMain WashSoftenerPre-wash
    Praniewstêpne
    Rapid
    Szybki
    Startdelay
    Opóźnienieurucho-mienia
    Clean+
    Clean+
    Coldwash
    Pranie na zimno
    Intensiverinse
    Superp³ukanie
    Easyironing
    Bezzagnieceń
    Rinsehold
    Stopp³ukanie
    Spin
    Wirowanie
    Cotton/ Antibacterial95 °C
          Bawełniane 95 °C6.0Normally to heavily soiled and robust white cotton laundry. In case of heavy soiling or stains, you can add an oxygenbased bleach additive which can \
    be used at 95°C. This programme eliminates bacteria, ensuring sanitization of your laundry. 
    iYesii–ii–iiiiMax.
    Cotton40 - 60 °CBawełniane40 - 60 °C6.0Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.iYesiiiiiiiiiiMax.
    SuperEco60 °C60 °C6.0
    Heavily soiled and robust laundry made of cotton, synthetics and their b\
    lends. Economical energy consumption by prolonged wash duration - ideal to be r\
    un overnight to profit from more favourable energy rates. Avoid noise of spinning at night by setting the spin speed to “0” and start spin programme in\
     the morning, or by defining programme start with “Start delay ” accordingly. - For garments with a high share of synthetic fibres, we recommend to use a laundry net.
    –Yesi––i–ii–iiMax.
    Synthetics30 - 40 - 60 °CSyntetyczne30 - 40 - 60 °C3.0Normally soiled garments made of artificial fibres (like polyester, polyacryl, viscose etc.) or their blends with cotton.iYesiiii–iiiiiMax.
    Delicates30 - 40 °CDelikatne30 - 40 °C1.5Curtains and delicate clothing, dresses, skirts, shirts and blouses.iYesii–i–i––ii1000 1)
    Daily load40 °CCodzienne40 °C3.0Slightly to normally soiled robust laundry made of cotton, linen, artifi\
    cial fibres and their blends. Effective one-hour programme. Make sure to wash only similar colours together in one wash load.–Yesi––i–iiiiiMax.
    Quick wash30 °CProgram szybki 30 °C3.0Shortly worn clothing made of cotton, polyester, polyamide and blends with cotton. Brief programme to refresh your laundry.–Yesi––i–i––iiMax.
    Wool20 - 40 °CWełniane20 - 40 °C1.0Only woollens, labelled with the Woolmark and identified as machine washable. This programme (40°C) is tested and approved by The Woolmark Company for machine washable wool.–Yesi––i–i––ii1000 1)
    Handwash40 °CPranie rêczne40 °C1.0Textiles made of silk, linen, wool and viscose marked as “handwashable”. This programme (40°C) is tested and approved by The Woolmark Company for handwashable wool.–Yesi––i–i––ii400 1)
    Lingerie30 °CBielizna  30 °C1.0This programme is particurarly suitable to treat delicate lingerie (use\
     of laundry net strongly recommended).–Yesi––i–i––ii400 1)
    Rinse & SpinPłukanie i wirowanie–6.0Same as the last rinse and the final spin in the “Cotton” programme.––i––i––i–iiMax.
    SpinWirowanie–6.0Intensive spin. Same as the spin cycle in the “Cotton” programme.–––––i–––––iMax.
    DrainWypompowanie––Drain only - no spinning. Alternative method of terminating programme af\
    ter “Rinse hold”.–––––i–––––––
    i : option / Yes : dosing required1) For improved garment care spin speed   is restricted in these programmes.
    The wool and handwash cycles of this machine have been tested and approv\
    ed by The Woolmark Company for the washing of Woolmark garments labelled as “machine wash” or “hand wash” p\
    rovided that the garments are washed according to theinstructions on the garment label and those issued in this programme cha\
    rt.                     M0619
                   
    						
    							CONSUMPTION DATA
    ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME
    SELECT ANY DESIRED OPTION
    “DOOR OPEN” INDICATION
    Before starting and after end of a programme, the lamp lights to show the the door can be opened. As long as a wash programme is running, the door remains locked and must on no account  be forced  open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.
    Push the button of any option desired - the respective indication lamp lights up. If the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.
    “Prewash” button• Only for heavily soiled loads (for example sand,  granular dirt). Increases the cycle time by approximately 15 min.• Do not use liquid detergent for the main wash when  activating the “Prewash” option.
    “Rapid” button•  Enables quicker washing by shortening the  programme duration.•  Recommendable for small loads or only lightly  soiled laundry.
    PROGRAMME START
    Open the tap and press the “Start/Pause” button. The indication lamp next to the “Start/Pause”  button lights up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain.
    PROGRAMME END
    • All the lights of the programme sequence indicator  are off, and the “Door open” indication lights up.1. Turn the programme selector to the “Off/O” position.2. Close the water tap.3. Open the door and unload the machine.4. Leave the door ajar to allow the drum to dry.
    CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START
    1. Press the “Start/Pause” button to pause the programme. The light blinks.2. Select the new programme (with temperature), any options and another spin speed if you want.3. Press the “Start/Pause” button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.
    CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END
    “Clean+” button•	Choose this option if you use an in-wash additive for  stain removal (powder, for example “Vanish”) - it will optimize the additive’s efficiency to get better wash performance and stain removal.•  Use with maximum load.•  Add an appropriate amount of in-wash additive for  stain removal (powder) to the main wash chamber,  together with your detergent (only use powder  detergent with this option).  Respect the manufacturer’s dosing instructions.•  Prolongs the programme by approx. 10 to 15  minutes.•  Appropriate for use of stain removers and bleaches  on oxygen basis. Chlorine or perborate bleaches  must not be used!
    “Cold wash” button•  Water is heated only up to 20°C.•  Suitable for delicate laundry items with wash  temperature recommendation of max. 30° on the  care label.•  Mainly selectable on the lowest temperature  step of the programmes only.
    “Intensive rinse” button• More water is added and rinse cycle is prolonged.• This option is particularly suitable for areas with very  soft water, washing baby linen and helps people with allergies.
    START DELAY
    Add detergents as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use.•	Turn the programme selector to the desired programme and temperature. •	The display shows the programme duration and the  predefined spin speed. •	The indication lamp next to the “Start/Pause”button  blinks.
    “Easy ironing” button• Can be used together with “Cotton”, “Synthetics”  and “Daily load” programmes to make ironing easier.• Increases the water quantity and the clothes are spun  very gently.
    “Rinse hold” button• The laundry remains in the last rinse water without  pregressing to the final spin cycle to avoid creasing and prevent colours from changing.• It is particularly useful if you want to postpone  spinning to a later time, or if you want to drain only. Note: The programme stops to “Rinse hold” at the time the “Rinse hold” lights in the preogramme sequence indication is on. The indication lamp next to the “Start/Pause” button blinks.
    Terminate the “Rinse hold” option:• Press the “Start/Pause” button; the programme  will terminate automatically with the final spin cycle for the present wash programme.• If you do not wish to spin the clothes, turn the  programme selector knob to the “Drain” programme and press the “Start/Pause” button.
    “Spin” button• Every programme has a predefined spin speed.• Press the button to set different spin speed.• If spin speed “0” is selected, the final spinning is  cancelled but intermediate spin peaks remain during rinse. The water is drained out only.
    The “Start delay ” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper.  Do not use liquid detergent when activating “Start delay ” option.• Select programme, temperature and options.• Press the “Start delay ” button to select the desired   delay time between 30 minutes and 23 hours.• Press the “Start/Pause” button.  On the display, the start delay symbol and the dot  between hours and minutes blink. The countdown of  the delay time begins.• The time delay indication disappears when the  programme starts and it is replaced by the remaining programme time.• Once having pressed the “Start/Pause” button,   the delay time can be reduced by pressing again the  “Start delay ” button.To cancel the “Start delay ”• Turn the programme selector to another position, or   press the “Start/Pause” button - the selected start  delay disappears from the display. Press “Start/ Pause” again if you want to start the selected  programme immediately.
    Whirlpool is a registered trademark of Whirlpool USA.
    5019 301 01215
    ProgrammeTemperature(°C)Load(kg)Water(l)
    Energy(kWh)without “Rapid”
    Approx. programme duration        (hours : minutes)
    without “Rapid”with “Rapid”
    Cotton/Antibacterial956.059*1.902:00-Cotton **606.0490.784:002:30Cotton **603.0370.692:20***Cotton 406.0540.652:451:45Cotton **403.0370.582:30***SuperEco606.0510.724:00-Synthetics603.050*0.701:301:09Synthetics403.0460.501:150:54Delicates301.5500.500:45-Daily load403.0450.451:00-Quick wash303.0400.400:30-Wool401.0550.600:45-Handwash401.0450.600:40-Lingerie301.0450.500:36-
    Consumption values were measured in normalized conditions in compliance \
    with standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the\
     water supply pressure and temperature, the load and the type of wash.Water and energy consumption refer to the default setting of the programm\
    es; selecting special options or modifying spin speed or temperature will change the consumption data.  The programme duration may differ from the values indicated above as it \
    depends on the operation conditions applicable at that time (see also “Troubleshooting Guide” in your Instructions for Use).* To reduce the water temperature, some cold water is added at the end of t\
    he main wash cycle, before the pump drains the water out.** Reference programmes for Energy Label.*** Automatic adaptation of programme duration after detection of wash load
    FAILURE INDICATIONS
    In case of any failures or irregularities, consult the“Troubleshooting Guide” in your Instructions for Use.
    “Service”Lighting up of the “Service” indication can be caused by a fault in an electrical component. 
    “Water tap closed”The washing machine has no or insufficient water supply; the water tap might be closed or the water inlet hose kinked.
    “Clean pump”Waste water is not pumped out. The drain hose may be kinked or the filter must be cleaned (see “Cleaning the filter” in your Instructions for Use).
    The “Reset” button cancels a programme before the end.• Press and hold the “Reset” button for a few   seconds.  Any existing water is drained out. It may last  some time until the door can be opened.
     
    						
    All Whirlpool manuals Comments (0)

    Related Manuals for Whirlpool Awoc 61200 Programme Chart Manual