Whirlpool Awo D 43130 Programme Chart Manual

							A
B
H
FEG
C
D
JI
Programme
Care LabelsMax.Load
kg
Type of wash / Notes
- respect the manufacturer's recommendations on the care label
Detergents and AdditivesSpecial optionsMaxSpin Speed
rpm
Pre- washMain WashSoftenerStartdelayRapidPre-washIntensiverinseRinse holdVariablespin
Cotton95 °C5.0Normally to heavily soiled and robust white cotton laundry. In case of heavy soiling or stains, you can add an oxygenbased bleach additive which can be used at \
95°C. This programme eliminates bacteria, ensuring sanitization of your laundry.iYe sii–iiiiMax.
Cotton40 - 60 °C5.0Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.iYe siiiiiiiMax.
SuperEco60 °C5.0
Heavily soiled and robust laundry made of cotton, synthetics and their b\
lends. Economical energy consumption by prolonged wash duration - ideal to be r\
un overnight to profit from more favourable energy rates. Avoid noise of spinning at night by setting the spin speed to “0” and start spin programme in the morning, or by d\
efining programme start with “Start delay ” accordingly. - For garments with a high share of synthetic fibres, we recommend to use a laundry net.
–Ye sii––iiiMax.
Synthetics30 - 40 - 60 °C2.5Normally soiled garments made of artificial fibres (like polyester, polyacryl, viscose etc.) or their blends with cotton.iYe siiiiiiiMax.
Delicates30 - 40 °C1.5Curtains and delicate clothing, dresses, skirts, shirts and blouses.iYe sii–i–ii1000 1)
Daily load40 °C3.0Slightly to normally soiled robust laundry made of cotton, linen, artifi\
cial fibres and their blends. Effective one-hour programme. Make sure to wash only similar colours together in one wash load.–Ye sii––iiiMax.
Quick wash30 °C3.0Shortly worn clothing made of cotton, polyester, polyamide and blends with cotton. Brief programme to refresh your laundry.–Ye sii–––iiMax.
WoolCold       - 40 °C1.0Only woollens, labelled with the Woolmark and identified as machine washable.–Ye sii–––ii1000 1)
Handwash30 - 40 °C1.0Textiles made of linen, silk, wool and viscose marked as “handwashable\
”.Care programme with a very gentle spin.–Ye sii–––ii400 1)
Rinse & Spin–5.0Same as the last rinse and the final spin in the “Cotton” programme.––ii ––iiiMax.
Spin–5.0In this programme spinning is intensive. Same as the spin cycle in the “\
Cotton” programme.–––i––––iMax.
Drain––Drain only - no spinning. Alternative method of terminating programme af\
ter “Rinse hold”.–––i––––––
Whirlpool is a registered trademark of Whirlpool USA.
5019 301 01260
A. “Door open” indication
This washing machine is equipped with 
automatic safety functions which detect 
and diagnose faults at an early stage and 
react appropriately, e.g.:
B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication
F. “Start/Pause” buttonG. “ Variable spin” button
H. Programme sequence indicator  and Start delay indicationI. “Reset” buttonJ. “Start delay ” button
Acustic noise level :Washing   -   59 dB(A) / 1 pWSpinning  - 1400 rpm  77 dB(A) / 1 pW   - 1200 rpm  75 dB(A) / 1 pW   - 1000 rpm  74 dB(A) / 1 pW
GB                                                                      \
            PROGRAMME CHART
i : option / Yes : dosing required1) For improved garment care spin speed  is restricted in these programmes.
  
						

							ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME
SELECT ANY DESIRED OPTION
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the lamp lights to show the the door can be opened. As long as a wash programme is running, the door remains locked and must on no account  be forced  open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.
PROGRAMME START
Open the tap and press the “Start/Pause” button.The indication lamp next to the “Start/Pause” button lights up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain.When the programme phase is finished, thecorresponding indication goes out. 
PROGRAMME END
• All the lights of the programme sequence indicator  are off, and the “Door open” indication lights up.1. Turn the programme selector to the “Off/O” position.2. Close the water tap.3. Open the door and unload the machine.4. Leave the door ajar to allow the drum to dry.
CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START
1. Press the “Start/Pause” button to pause the programme. The light flashes.2. Select the new programme (with temperature), any options and another spin speed if you want.3. Press the “Start/Pause” button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.
CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END
The “Reset” button cancels a programme before the end.• Press and hold the “Reset” button for a few   seconds. Any existing water is drained out. It may last  some time until the door can be opened.
The “Start Delay ” allows to run the machine at theconsumer’s convenience, for example at night whenelectricity is cheaper. Do not use liquid detergent when activating “Start delay ” option.•  Select programme, temperature and options.•  Press the “Start Delay ” button to select the delay time by 1, 3, 6, 9 or 12 hours.•  Press the “Start/Pause” button. The indication over to the “Start Delay ” button lights up and goes off when the programme     starts.•  Once having pressed the “Start/Pause” button, the countdown of the time delay begins. When the programme starts, the start delay indicator light goes off and is replaced by the programme sequence indication.•  After the “Start/Pause” button has been     pressed, the number of hours preselected can be   reduced by pressing again the “Start Delay ”   button.To cancel the “Start Delay ”..before you press the “Start/Pause” button:•  Turn the programme selector to another position   or press the “Reset” button...after having pressed the “Start/Pause” button:•  Press the “Reset” button for at least 3 seconds - the start delay indicator light goes out.
START DELAY
Push the button of any option desired - the respective indication lamp lights up. If the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.
“Rapid” button•   Enables quicker washing by shortening the  programme duration.•  Recommendable for small loads or only lightly  soiled laundry.
“Prewash” button• Only for heavily soiled loads (for example sand,  granular dirt). Increases the cycle time by approximately 15 min.• Do not use liquid detergent for the main wash  when activating the “Prewash” option.
“Intensive rinse” button• More water is added and rinse cycle is prolonged.• This option is particularly suitable for areas with   very soft water, washing baby linen and helps  people with allergies.
“Rinse hold” button• The laundry remains in the last rinse water   without pregressing to the final spin cycle to avoid  creasing and prevent colours from changing.• This option is particularly recommended for the  programmes “Synthetics”, “Daily load” and “Delicates”.• It is particularly useful if you want to postpone  spinning to a later time, or if you want to drain only.• If you select “Rinse hold” do not leave items to   soak  for too long. Note: The programme stops to “Rinse hold” at  the time the “Rinse hold” lights in the preogramme sequence indication is on. The indication lamp next to the “Start/Pause” button flashes. 
Terminate the “Rinse hold” option:• Press the “Start/Pause” button; the programme  will terminate automatically with the final spin  cycle for the present wash programme.• If you do not wish to spin the clothes, turn the  programme selector knob to the “Drain”   programme and press the “Start/Pause”button.
“Spin” button• Every programme has a predefined spin speed.• Press the button to set another spin speed.• If spin speed “0” is selected, the final spinning is  cancelled but intermediate spin peaks remain during the rinse. The water is drained out only.
ProgrammeTemperature(°C)Load(kg)Water(l)
Energy(kWh)without “Rapid”
Approx. programme duration        (hours : minutes)
without “Rapid”with “Rapid”
Cotton955.053*1.702:00-
Cotton **605.0440.754:002:30
Cotton **602.5320.652:20***
Cotton 405.0490.602:451:45
Cotton **402.5320.552:30***
SuperEco605.0470,604:00-
Synthetics602.550*0.701:301:09
Synthetics402.5450.501:150:54
Delicates301.5500.500:45-
Daily load403.0450.451:00-
Quick wash303.0400.400:30-
Wool401.0550.600:45-
Handwash401.0450.600:40-
Handwash301.0450.500:36-
CONSUMPTION DATA
Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the\
 water supply pressure and temperature, the load and the type of wash.Water and energy consumption refer to the default setting of the programm\
es; selecting special options or modifying spin speed or temperature will change the consumption data.  The programme duration may differ from the values indicated above as it \
depends on the operation conditions applicable at that time (see also “Troubleshooting Guide” in your Instructions for Use).* To reduce the water temperature, some cold water is added at the end of t\
he main wash cycle, before the pump drains the water out.** Reference programmes for Energy Label.*** Automatic adaptation of programme duration after detection of wash load
Add detergents as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use.• Turn the programme selector to the desired   programme and temperature. • The indication lamp next to “Start/Pause”  button blinks.• The indication lamp of the predefined spin speed  lights up.
FAILURE INDICATIONS
In case of any failures or irregularities, consult the“Troubleshooting Guide” in your Instructions for Use.
“Service”Lighting up of the “Service” indication can be caused by a fault in an electrical component. 
“Water tap closed”The washing machine has no or insufficient water supply; the water tap might be closed or the water inlet hose kinked.
“Clean pump”Waste water is not pumped out. The drain hose may be kinked or the filter must be cleaned (see “Cleaning the filter” in your Instructions for Use).
Whirlpool is a registered trademark of Whirlpool USA.
5019 301 01260