Whirlpool Awo 9361 Programme Chart Manual

							GB AWO  9361  PROGRAMME CHART
5019 301 05609❉: optional / Yes : dosing required1)
For improved garment care spin speed is restricted to 800 rpm in this programme.
2)
In this programme default spin speed can be increased till 400 rpm.
Whirlpool is a registered trademark of Whirlpool USA
Programme
Care
Labels
Type of wash/Notes
Max 
Load
Detergents and additives
Special options
Max
Spin
Speed
rpm
Te m p e r a t u r e
°C
Softener
Main
Wa s h
Prewash
Start
Delay
Easy
Ironing
Eco 
plus
Prewash
Intensive
Rinse
Rinse
Hold
Spin
Speed
Reduction
kg
Cotton
 
Normally to heavily soiled bed linen, table linen and underwear, towels, 
shirts etc. made of cotton, coloured cotton and linen. 
For temperature selection, please respect the manufacturers 
recommendation on the care label.
With heavily soiled laundry the additional “Prewash” option can be selected 
as well.
6.0
❉
Ye s
❉❉❉❉❉ ❉ ❉ ❉
1000 20 to 95
Synthetics
 
 
Normally to heavily soiled blouses, shirts, overalls etc. made of polyester 
(Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.
2.5
❉
Ye s
❉❉❉❉❉ ❉ ❉
❉
1)
800
1)
20 to 60
Daily
 
Slightly to normally soiled textiles made of cotton and/or synthetics.
3.0
❉
Ye s —
❉❉
——
❉❉ ❉
1000 30 to 60
Superrapid
Shortly worn outer clothing made of cotton, polyester, polyamide and 
blends with cotton.
3.0
❉
Ye s —
❉❉
——
❉❉ ❉
1000 20 to 30
Delicates
 
Curtains and delicate clothing, dresses skirts, shirts and blouses.
1.5
❉
Ye s
❉❉
——
❉
—
❉
❉
1)
800
1)
20 to 40
Wool
Only woollens with a felt-free finish, labelled with the woolmark and 
identified as machine washable.
If you select “Rinse Hold” do not leave items to soak for too long.
1.0
❉
Ye s —
❉
——— —
❉
❉
1)
800
1)
20 to 40
Handwash
Textiles made of silk, linen, wool and viscose marked as “handwashable”.
If you select “Rinse Hold” do not leave items to soak for too long. A very 
gentle spin is used in this programme.
1.0
❉
Ye s —
❉
——— —
❉
❉
2)
400
2)
20 to 30
Rinse + Spin
+
—
Same as the last rinse and the final spin in the “Cotton” programme.
6.0
❉
——
❉❉
——
❉❉ ❉
1000 —
Spin
—In this programme spinning is intensive. Same as the spin cycle in the 
“Cotton” programme.
6.0 — — —
❉
——— — —
❉
1000 —
Gentle Spin
—In this programme spinning is gentle. Same as the spin cycle in the “Wool” 
programme.
1.5 — — —
❉
——— — —
❉1)
800
1)
—
Drain
—Drain only - no spinning. Alternative method of terminating programme after 
“Rinse Hold”.
— ——— — ——— — — — — —
6th Sense intelligent technology always guarantees perfect results with maximum efficiency whatever 
the wash load.
B
I F
G
HA
DC
JK
LM E
This washing machine is equipped with 
automatic safety functions which detect 
and diagnose faults at an early stage and 
react appropriately, e.g.:
A. “Water Tap Closed” indication
B. “Clean Pump” indication
C. “Door Locked” indication
D. “Water Stop” indicationE. Programme selector knob
F. Programme sequence indication
G. Temperature selection button
H. “Start/Pause” button
I. “Start/Pause” indication
J. “Start Delay” button
K. “Start Delay” indication/“Remaining 
Time” display
L. “Reset” button
M. “Spin Speed” button
Selecting any option the indication lights 
up. When the combination of programme, 
additional options and temperature is not 
possible, the indication lights switch off 
automatically. Unsuitable combinations of 
options are deselected automatically.3gb05609.fm  Page 1  Friday, June 4, 2004  11:57 AM
Black process 45.0° 100.0 LPI 
 
						

							5019 301 05609
Whirlpool is a registered trademark of Whirlpool USA
Add the detergents as described in the programme 
table or in the chapter “Detergents and Additives” 
in the booklet.
1. Turn the 
programme selector knob to the 
desired programme.
2. The remaining time display shows the duration 
of the chosen programme (in hours and 
minutes) and the indication of the 
“Start/
Pause” button is flashing.
3. The programme sequence and the predefined 
spin speed indication corresponding to the 
selected programme lights up.
The recommended temperature (see the 
indicator) can be altered by pressing “
+/-” button.
Selecting any option the indication lights up.
When the combination of programme, additional 
options and temperature is not possible, the indication 
lights switch off automatically. Unsuitable 
combinations of options are deselected automatically.
“Easy Ironing” button
 Can be used together with “Cotton”, “Synthetics” 
and “Daily ” programmes to make ironing easier.
 Increases the water quantity and the clothes are 
spun very soft.“Eco plus” button
 With a modified temperature profile and a slightly 
prolonged washing duration, the optimum 
combination of excellent washing result and even 
lower energy consumption can be achieved.
“Prewash” button
 Only for heavily soiled loads (for example sand, 
granular dirt) sensible. The cycle time increases 
approximately 15 min.
“Intensive Rinse” button
 More water and a longer time in rinse cycle is added.
 This option is particularly suitable for areas with 
very soft water, washing baby linen and helps 
people with allergies.
“Rinse Hold” button
 The laundry remains in the last rinse water 
without progressing to the final spin cycle to avoid 
creasing and prevent colours from changing.
 This option is particularly recommended for the 
programme “Synthetics”, “Daily ” and “Delicates”.
 This function is particularly useful if you want to 
postpone spinning to a later time, or if you want 
to drain only.
Note: The programme stops to “Rinse Hold” at 
the time the “Rinse Hold” light in the programme 
sequence indication is on.
Terminate the “Rinse Hold” option:
 Press the “Rinse Hold” button again; the 
programme will terminate automatically with the 
final spin cycle for the present wash programme.CONSUMPTION DATA
Programme
Temperature 
Selector
(°C)
Load
(kg)
Wat e r
(l)
Energy
(kWh)
Approx. Programme
Duration
(hours : minutes)*
Cotton 95 6.0 54** 1.90 2:00
Cotton 60 6.0 49 1.14 2:20
Cotton with “Eco plus”*** 60 6.0 49 1.02 2:30
Cotton 40 5.0 44 0.60 2:05
Synthetics 60 2.5 55 0.80 1:30
Synthetics 40 2.5 55 0.60 1:20
Daily 40 3.0 45 0.50 1:00
Superrapid 30 3.0 37 0.40 0:30
Delicates 30 1.5 60 0.50 0:45
Wool 30 1.0 60 0.30 0:40
Handwash 30 1.0 45 0.30 0:40
Prewash cycle might increase programme duration. Consumption values were measured in normalized conditions in compliance 
with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the 
water supply pressure and temperature, the load and the type of wash.
* The remaining time indicator can similarly deviate from the values in the table, because it takes into account the household 
conditions applicable at that time.
** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the 
water out.*** Reference Programme for Energy LabelADD DETERGENTS, CLOSE THE DOOR 
AND SELECT THE PROGRAMMESELECT ANY DESIRED OPTION
 If you do not wish to spin the clothes, turn the 
programme selector knob counterclockwise to 
the “Drain” programme and press the 
“Start/Pause” button again when the indication 
next to it is flashing.
“Spin Speed” button
 Every programme has an automatic predefined 
maximum spin speed.
 Press the button to set another spin speed.
 If the spin speed “0” is selected, the final spinning is 
cancelled but intermediate spin peaks remain 
during rinse. The water is drained out only.
The “Start Delay” allows to run the machine at the 
consumer’s convenience, for example at night when 
electricity is cheaper.
 Select programme, temperature and options.
 Press the “Start Delay ” button to select the delay 
time by 1 to 23 hours;
Press the 
“Start/Pause” button. 
The indication next to the “Start Delay ” button 
lights up and goes off when the programme starts.
 The time delay indication disappears when the 
programme starts and it is replaced by the 
remaining time.
 The number of hours preselected can later be 
reduced pressing again the “Start Delay ” button.
To cancel the “Start Delay ”
..before you press the “Start/Pause” button:
 Turn the programme selector to the 
“Off
/0”
 
position.
 Reselect the desired programme and options and 
press 
“Start/Pause” button to start the programme.
..after having pressed the “Start/Pause” button:
 Press the “Reset” button for at least 3 seconds - 
the start delay time disappears from the 
remaining time indication,
 then either start the chosen programme by 
pressing the 
“Start/Pause” button twice
 or turn the programme selector knob to the 
“Off/0” position and chose another programme.
Open the tap and press the 
“Start/Pause” button. The 
indication next to the 
“Start/Pause” button lights up.
The indications show the sequence reached in the 
programme. After starting the programme, the 
sequence indication runs from left to right through 
Wash, Rinse, Spin.
When the sequence of the programme is finished 
the corresponding indication goes out.“Water Tap Closed”
The appliance has no or insufficient water supply. 
Open the water tap; if the indication still lights up, 
refer to the “Troubleshooting Guide” in the 
Instructions for Use.
“Clean Pump”
Waste water is not pumped out. Check whether the 
drain hose is kinked or the filter must be cleaned; in 
the latter case refer to the Instructions for Use 
(“Removing the Filter”).
“Door Locked”
As long as a washing programme is running, the 
lamp lights up to show that the door cannot be 
opened. When the indication goes off, the door can 
be opened again.
“Water Stop”
Lighting up of the water stop indication can be 
caused by a leak in the appliance or hose. Please 
refer to the “Troubleshooting Guide” in the 
Instructions for Use.
 The remaining time is on “0:00” and all the 
lights of the programme sequence indication 
are off.
1. Turn the programme selector to the 
“Off
/0”
 
position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry out.
1. Press the 
“Start/Pause” button to pause the 
programme. The light flashes.
2. Select the new programme (with temperature), 
any options and another spin speed if you want.
3. Press the 
“Start/Pause” button again. The 
new programme continues at the same position 
where the previous programme was 
interrupted. Do not add detergent for this 
programme.
The 
“Reset” button cancels a programme before 
the end.
Press the 
“Reset” button for at least 3 seconds. 
Any existing water is drained out before the 
door can be opened.
START DELAYPROGRAMME START
RED INDICATIONSPROGRAMME ENDCHANGE THE PROGRAMME, 
TEMPERATURE, OPTIONS AFTER 
PROGRAMME STARTCANCEL (RESET) A RUNNING 
PROGRAMME BEFORE THE END
3gb05609.fm  Page 2  Friday, June 4, 2004  11:57 AM
Black process 45.0° 100.0 LPI