Whirlpool Awo 10761 Programme Chart Manual

							GB AWO  10761 PROGRAMME CHART
5019 301 05797❉:optional / Yes : dosing required
1)
For improved garment care spin speed is restricted to 1000 rpm in this programme.
2)
For improved garment care spin speed is restricted to 400 rpm in this programme.
Whirlpool is a registered trademark of Whirlpool USA
M0501
- tested and approved by The Woolmark Company -
Main
programmes
Care
Labels
Type of wash/Notes
Max
Load
kg
Detergents and additives
Special options
Max
Spin
Speed
rpm
Te m p e -
rature
°C
Prewash
Main
Wa s h
Softener
Start
delayDépart
différé
Easy
IroningAnti-
froissage
Special
7 kgSpécial
7 kg
PrewashPré-
lavage
Intensive
RinseRinçage
plus
Rinse
HoldArrêt
cuve pleine
Cotton (Anti-bacterial) 
Coton
 
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. 
made of cotton, coloured cotton and linen. 
For temperature selection, please respect the manufacturers recommendation on 
the care label. At a temperature of 80°C or more, this programme eliminates 
bacteria, ensuring sanitization of your laundry. The bacteria removal efficiency has 
been tested following a similar methodology to the NF EN 13697 standard of Nov. 
2001.
With heavily soiled laundry the additional “Prewash” option can be selected as well.
6.0
❉
Ye s
❉❉❉❉❉ ❉ ❉
1400 20 to 95
SyntheticsSinthétique
 
 
Normally to heavily soiled blouses, shirts, overalls etc. made of polyester (Diolen, 
Trevira), polyamide (Perlon, Nylon) or blends with cotton.
2.5
❉
Ye s
❉
—❉
—❉❉ ❉
1000
1)20 to 60
Daily load
 
Slightly to normally soiled textiles made of cotton and/or synthetics.
3.0
—
Ye s
❉
—❉
——❉❉
1400 30 to 60
Quick wash 30 min
Chrono
Shortly worn outer clothing made of cotton, polyester, polyamide and blends with 
cotton.
3.0
—
Ye s
❉
—❉
——❉❉
1400 20 to 30
DelicateDélicat
 Curtains and delicate clothing, dresses skirts, shirts and blouses.
1.5
❉
Ye s
❉
———❉
—❉
1000
1)20 to 40
Woo lLaine
 
Only woollens with a felt-free finish, labelled with the woolmark and identified as 
machine washable. This programme (40°C) is tested and approved by The 
Woolmark Company for machine washable wool.
If you select “Rinse Hold” do not leave items to soak for too long.
1.0
—
Ye s
❉
———— —❉
1000
1)20 to 40
HandwashLavage main
 
Textiles made of silk, linen, wool and viscose marked as “handwashable”. 
This programme (40°C) is tested and approved by The Woolmark Company for 
handwashable wool.
If you select “Rinse Hold” do not leave items to soak for too long. A very gentle spin is 
used in this programme.
1.0
—
Ye s
❉
———— —❉
400
2)
20 to 40
Rinse & SpinRinçage & Essorage
—
Same as the last rinse and the final spin in the “Cotton” programme.
6.0
——❉
—
❉
—
—❉❉
1400
—
SpinEssorage
—
In this programme spinning is intensive. Same as the spin cycle in the “Cotton” 
programme.
6.0
——————— — —
1400
—
Short spinEssorage doux
—
In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.
1.5
——————— — —
1000
1)
—
Reset / DrainAnnulation / Vidange
—
Drain only - no spinning. Alternative method of terminating programme after “Rinse 
Hold”.
—
——————— — — ——
6th Sense intelligent technology always guarantees perfect results with maximum efficiency whatever the 
wash load.
A. “Door locked” indication - 
When the blue lamp lights up, the 
door cannot be opened -
This washing machine is equipped with 
automatic safety functions which detect 
and diagnose faults at an early stage and 
react appropriately:
B. “Clean filter” indication
C. “Water tap closed” indicationD. “On/Off” button
E. “Start/Pause” button
F. Display
G. Temperature selection buttons
H. Spin speed selection button
I. “Reset/Drain” button
J. “Start delay” button
K. “Favourites” button
L. Programme selection button
Programme Sequence Indicators (on display)
+/-
prewash main rinse rinse spin
wash stop
E
L
D
AB
F
G
J
H
I
K
C
30105797GB.fm  Page 1  Friday, September 23, 2005  7:12 PM
Black process 45.0° 100.0 LPI 
 
						

							5019 301 05797
Whirlpool is a registered trademark of Whirlpool USA
Add the detergents as described in the programme 
table or in the chapter “Detergents and Additives” 
in your Instructions for Use booklet.
1. Switch on the machine by pressing the 
“On/Off”-button.
2. The blue indication lights of the main programmes 
and of the “Reset/Drain” button light up.
3. Select the desired programme by pressing the 
corresponding button. The blue lamps of the other 
programmes go out, and the lamp of the 
“Start/
Pause” button flashes. The display shows the 
predefined spin speed and temperature 
corresponding to the selected programme.4.
The temperature can be altered by pressing the 
temperature selection buttons 
“+/-”, the spin 
speed by pressing the spin speed selection button 
. If spin speed “0” is selected, the final spinning 
is cancelled, but intermediate spin peaks remain 
during rinse; the water is drained out only.
 Wash your laundry in the desired programme 
(Cotton, Synthetics), adding an appropriate 
amount of chlorine bleach to the SOFTENER 
chamber (close the detergent dispenser 
carefully).
 Immediately after end of programme, start the “Rinse 
and Spin” programme to eliminate any residual bleach 
smell; if you want, you can add softener.Selecting any special option the indication lights up.
When the combination of programme, additional 
options and temperature is not possible, the indication 
lights switch off automatically. Unsuitable 
combinations of options are deselected automatically.
“Special 7 kg” button
 Allows you, in the “Cotton” programme, to 
effectively wash loads up to 7 kg  with minimal 
water usage and energy consumption.
“Easy Ironing” button
 Can be used together with “Cotton”, “Synthetics” 
and “Daily ” programmes to make ironing easier.
 Increases the water quantity and the clothes are 
spun very soft.
“Prewash” button
 Only for heavily soiled loads (for example sand, 
granular dirt) sensible. The cycle time increases 
approximately 15 min.
“Intensive Rinse” button
 More water and a longer time in rinse cycle is added.
 This option is particularly suitable for areas with 
very soft water, washing baby linen and helps 
people with allergies.
“Rinse Hold” button
 The laundry remains in the last rinse water 
without progressing to the final spin cycle to avoid 
creasing and prevent colours from changing.
CONSUMPTION DATA
Programme
Temperature 
Selector
(°C)
Load
(kg)
Wa t e r
(l)
Energy
(kWh)
Approx. Programme
Duration
(hours : minutes)*
Cotton (Anti-bacterial) 95 6.0 54** 1.90 2:00
Cotton 60 6.0 49 1.14 2:20
Cotton with “Special 7 kg” *** 60 7.0 57 1.33 2:35
Cotton 40 5.0 44 0.60 2:05
Synthetics 60 2.5 55 0.80 1:30
Synthetics 40 2.5 55 0.60 1:20
Daily load 40 3.0 45 0.50 1:00
Quick wash 30 3.0 37 0.40 0:30
Delicate 30 1.5 60 0.50 0:45
Wool 30 1.0 60 0.30 0:40
Handwash 30 1.0 45 0.30 0:40
Prewash cycle might increase programme duration. Consumption values were measured in normalized conditions in compliance 
with Standard IEC / EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the 
water supply pressure and temperature, the load and the type of wash.
* The remaining time indicator can similarly deviate from the values in the table, because it takes into account the household 
conditions applicable at that time. When the remaining programme duration is newly calculated, the 6th sense symbol 
appears on the display.
** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
*** Reference programme for the energy label.ADD DETERGENTS, CLOSE THE DOOR 
AND SELECT THE PROGRAMMEUSING CHLORINE BLEACH
SELECT SPECIAL OPTIONS
 This option is particularly recommended for the 
programme “Synthetics”, “Daily ” and “Delicates”.
 This function is particularly useful if you want to 
postpone spinning to a later time, or if you want 
to drain only.
Note: The programme stops to “Rinse Hold” at 
the time the “Rinse Hold” symbol is indicated on 
the display. The 
“Start/Pause” button flashes.
Terminate the “Rinse Hold” option:
Press the 
“Start/Pause” button; the 
programme will terminate automatically with the 
final spin cycle for the present wash programme.
 If you do not wish to spin the clothes, press the 
“Reset/Drain” button and afterwards the 
“Start/
Pause” button to start the “Drain” programme.
You have the possibility to store, for each main 
programme, your preferred combination of 
programme, options, temperature and spin speed. 
After having selected the desired combination, 
press the 
“Favourites” button for at least 3 sec. 
Next time you choose the corresponding 
programme, the display will show you the stored 
parameters, and you just have to press 
“Start/
Pause”. If you want to change the stored 
combination, just make your new choice and again 
press the “Favourites” button for at least 3 sec.
The previous combination is cancelled 
automatically, and the new one is stored.
The “Start Delay” allows to run the machine at the 
consumer’s convenience, for example at night when 
electricity is cheaper.
 Select programme, temperature, spin speed and 
options.
 Press the “Start Delay ” button   to select the 
delay time by 1 to 23 hours. The selected start 
delay is indicated on the display under 
“Remaining Time”.
Press the 
“Start/Pause” button - the 
countdown of the selected start delay begins.
 The start delay indication disappears when the 
programme starts and is replaced by the 
remaining time.
 The number of hours can be modified later by 
pressing the “Start Delay ” button again.
To cancel the “Start Delay ”
 Press the “Reset/Drain” button for at least 3 
seconds - the start delay time disappears from 
the remaining time indication.Open the tap and press the 
“Start/Pause” button. 
The blue lamp under the 
“Start/Pause” button 
stops flashing and lights up. The display indicates the 
sequence reached in the programme by the 
corresponding symbol. When the programme 
sequence is finished, the corresponding symbol 
disappears. Under “Remaining Time”, the display 
indicates the remaining programme duration.
As long as a washing programme is running, the lamp 
lights up to show that the door cannot be opened. When 
the indication goes off, the door can be opened again.
“Clean filter”
Waste water is not pumped out. Check whether the 
drain hose is kinked or the filter must be cleaned; in 
the latter case refer to the Instructions for Use 
(“Removing the Filter”).
“Water tap closed”
The appliance has no or insufficient water supply. Open 
the water tap; if the indication still lights up, refer to the 
“Troubleshooting Guide” in the Instructions for Use.
 On the display, the “Remaining time” disappears 
and “End” is indicated.
1. Switch the machine off by pressing the 
“On/Off”-button.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry out.
1. Press the 
“Start/Pause” button to pause the 
programme. The light flashes.
2. Select the new programme (with temperature), 
any options and another spin speed if you want.
3. Press the 
“Start/Pause” button again. The new 
programme continues at the same position where 
the previous programme was interrupted. Do not 
add detergent for this programme.
Press the 
“Reset/Drain” button for at least 3 
seconds. Any existing water is drained out 
before the door can be opened.FAVOURITESSTART DELAY
PROGRAMME STARTBLUE “DOOR LOCKED” INDICATIONRED INDICATIONSPROGRAMME ENDCHANGE THE PROGRAMME, 
TEMPERATURE, OPTIONS AFTER 
PROGRAMME STARTCANCEL (RESET) A RUNNING 
PROGRAMME BEFORE THE END
30105797GB.fm  Page 2  Friday, September 23, 2005  7:12 PM
Black process 45.0° 100.0 LPI