Whirlpool Awm 6102 Programme Chart Manual

							5019 301 10158
Whirlpool is a registered trademark of Whirlpool USA.
;
Programme
Care
Labels
Type of wash/Notes
Max Load
Detergents and additives
Special options
Max
Spin
Speed
rpm
Programme
Selector
Bleach
Softener
Main 
Wa s h
Pre-
wash
Start 
Delay
Easy
Ironing
Prewash
Intensive
Rinse
Rinse
Hold
Spin Speed
Reduction
Kg
Cotton
  
 
Normally to heavily soiled bed linen, table linen and underwear, towels, 
shirts etc. made of cotton and linen.
With heavily soiled laundry the additional “Prewash” option can be selected 
as well.
5.0
❉❉
Ye s
❉❉❉❉❉ ❉ ❉
1000
95°,60°,40°
Synthetics
  
Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, 
Trevira), polyamide (Perlon, Nylon) or blends with cotton.
2.5
—
❉
Ye s
❉❉❉❉❉ ❉
❉
1)
800
1)
60°,40°
Daily
 
Slightly to normally soiled textiles made of cotton and/or synthetics.
3.0
—
❉
Ye s —
❉❉
—
❉❉ ❉
1000
40°
ShortShortly worn outer clothing made of cotton, polyester, polyamide and 
blends with cotton.
3.0
—
❉
Ye s —
❉❉
—
❉❉ ❉
1000
30°
Delicates
 
Curtains and delicate clothing, dresses skirts, shirts and blouses.
1.5
—
❉
Ye s
❉❉
—
❉
—
❉
❉
1)
800
1)
40°,30°
WoolOnly woollens with a felt-free finish, labelled with the woolmark and 
identified as machine washable.
If you select “Rinse Hold” do not leave items to soak for too long.
1.0
—
❉
Ye s —
❉
———
❉
❉
1)
800
1)
30°,20°
SilkTextiles made of linen, silk, wool and viscose marked as “handwashable”.
If you select “Rinse Hold” do not leave items to soak for too long. No spinning.
1.0
—
❉
Ye s —
❉
———
❉
—
0
2)
30°
Rinse + spin —Same as the last rinse and the final spin in the “Cotton” programme.
5.0
—
❉
——
❉❉
—
❉❉ ❉
1000
Spin —In this programme spinning is intensive. Same as the spin cycle in the 
“Cotton” programme.
5.0
—— ——
❉
——— —
❉
1000
Gentle spin —In this programme spinning is gentle. Same as the spin cycle in the “Wool” 
programme.
1.5
—— ——
❉
——— —
❉1)
800
1)
Drain —Drain only - no spinning. Alternative method of terminating programme after 
“Rinse Hold”.
—
—— ——————— —
—
A. Programme Sequence Indicator
B. “Start/Pause” Button
C. “Door Open” Indication
D. “Spin Speed Reduction” ButtonSelecting any option the indication lights 
up.
When the combination of programme, 
additional options and temperature is not 
possible, the indication lights switch off 
automatically. Unsuitable combinations of 
options are deselected automatically.
❉ : optional / Yes : dosing required1For improved garment care spin speed is restricted 
to 800 rpm in this programme.2For improved garment care spin speed is null in this 
programme.
A
D C B
AWM  6102 GB
 
						

							5019 301 10158
Whirlpool is a registered trademark of Whirlpool USA.
Prewash cycle might increase programme duration. Consumption values were measured in normalized conditions in 
compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table 
in relation to the water supply pressure and temperature, the load and the type of wash.
* The remaining time indicator can similarly deviate from the values in the table, because it takes into account the 
household conditions applicable at that time.
** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water 
out.Add the detergent as described in the programme 
table or in the chapter “Detergents and Additives” in 
the booklet.
1. Turn the programme selector knob
 to the 
desired programme and temperature.
2. The remaining time display shows the duration of 
the chosen programme (in hours and minutes) 
and after taking some seconds for calculating, the 
pilot lamp of the “Start/Pause”
 button is 
flashing.
3. The programme sequence and the predefined 
spin speed indication corresponding to the 
selected programme lights up.
Selecting any option the indication lights up.
When the combination of programme, 
additional options and temperature is not 
possible, the indication lights switch off 
automatically. Unsuitable combinations of 
options are deselected automatically.“Easy Ironing” button
 Can be used together with Cotton, Synthetics 
and Daily programmes to make ironing easier.
 Increases the water quantity and the clothes are 
spun very soft.
“Prewash” button
 Only for heavily soiled loads (for example sand, 
granular dirt) sensible. The cycle time increases 
approximately 15 min.
“Intensive Rinse” button
 More water and a longer time in rinse cycle is 
added.
 This option is particularly suitable for areas with 
very soft water, washing baby linen and helps 
people with allergies.
“Rinse Hold” button
 The laundry remains in the last rinse water 
without progressing to the final spin cycle to 
avoid creasing and prevent colours from 
changing.
 This option is particularly recommended for the 
programme “Synthetics”, “Daily ” and 
“Delicates”.
 This function is particularly useful if you want to 
postpone spinning to a later time, or if you want 
to drain only.CONSUMPTION DATA
Programme
Te m p e r a t u r e  
Selector
(°C)
Load
(kg)
Wa t e r
(l)
Energy
(kWh)
Approx.
Programme
Duration
(hours : minutes)*
Cotton 95 5.0 49** 1.90 2:00
Cotton 60 5.0 44 0.95 2:20
Cotton 40 4.5 44 0.60 2:05
Synthetics 60 2.5 55 0.80 1:30
Synthetics 40 2.5 55 0.60 1:20
Daily 40 3.0 45 0.50 1:00
Short 30 3.0 37 0.40 0:30
Delicates 40 1.5 60 0.60 0:45
Wool 30 1.0 60 0.30 0:40
Silk 30 1.0 45 0.30 0:40
ADD DETERGENTS, CLOSE THE DOOR AND 
SELECT THE PROGRAMMESELECT ANY DESIRED OPTION
Note: 
The programme stops to “Rinse Hold” at 
the time the “Rinse Hold” light in the programme 
flow indication is on.
Terminate the “Rinse Hold” option:
 Press the “Rinse Hold” button again; the 
programme will terminate automatically with 
the final spin cycle for the present wash 
programme.
 If you do not wish to spin the clothes, turn the 
programme selector knob to the “Drain” 
programme and press the “Start/Pause”
 
button again when flashing.
“Spin Speed Reduction” button
 Every programme has an automatic predefined 
maximum spin speed.
 Press the button to set another spin speed.
 If the spin speed “0
” is selected, the final 
spinning is cancelled but intermediate spin 
peaks remain during rinse. The water is drained 
out only.
The “Start Delay” allows to run the machine at the 
consumer’s convenience, for example at night 
when electricity is cheaper.
 Press the “Start Delay ” button to select the 
delay time by 1 to 23 hours;
Press the “Start/Pause”
 button.
 The time delay indication disappears when the 
programme starts and it is replaced by the 
remaining time.
 The number of hours preselected can later be 
reduced pressing again the “Start Delay ” 
button.
To cancel the “Start Delay ”.
 Turn the programme selector to the “ ” 
position.
 Reselect the desired programme and options 
and press the “Start/Pause”
 button.
Open the tap and press the “Start/Pause”
 
button. The pilot lamp of the “Start/Pause”
 
button lights up.
The indicator lamps show the sequence reached in 
the programme. After starting the programme, the 
sequence indication runs from left to right through 
Wash, Rinse, Spin.
When the sequence of the programme is finished 
the corresponding lamp goes out.The door can be opened when the “Door Open” 
indication is on.
 The remaining time is on “0:00” and all the 
lights of the programme sequence indication 
are off.
1. Turn the programme selector to the 
“”
 
position.
2. Turn the water supply tap off.
3. Open the door and unload the machine.
4. Close the tap and leave the door ajar to allow 
the drum to dry out.
1. Press the “Start/Pause”
 button to pause the 
programme. The light flashes.
2. Select the new programme (with temperature), 
any options and another spin speed if you want.
3. Press the “Start/Pause”
 button again. The 
new programme continues at the same 
position where the previous programme was 
interrupted. Do not add detergent for this 
programme.
1. Press the “Start/Pause”
 button to pause the 
programme. The light flashes.
2. Set the programme selector to “Drain”. The 
spin indicators show “0”
 and the remaining 
time shows “0:02”.
3. Press the “Start/Pause”
 button to start the 
drain programme.
START DELAYPROGRAMME START
DOOR LOCKPROGRAMME ENDCHANGE THE PROGRAMME, OPTIONS 
AFTER PROGRAMME STARTCANCEL A PROGRAMME BEFORE THE 
END