Whirlpool Awm 1111 Programme Chart Manual

							GB AWM 1111 PROGRAMME CHART
5019 301 152631)
For improved garment care, spin speed is restricted in these programmes.
2)
In this column are indicated the most appropriate care labels, 
but not all which are possible to be treated with the programme.
Whirlpool is a registered trademark of Whirlpool USA
The wool cycle of this machine has been tested and approved by The Woolmark Company for the washing of Woolmark 
garments labelled as “machine wash” provided that the garments are washed according to the instructions on the garment 
label and those issued in this programme chart.  M0805
Programme
Care
labels
2)
Ty p e  o f  w a s h / N o t e s
- Respect the manufacturer’s recommendations on the care label.
Max.
Load
kg
Detergent and additives
Special Options and Modifiers
Start
delay
Max.
Spin
Speed
rpm
Te m p e -
rature
°C
Pre-
wash
Main
wash
Softener
Rapid
Easy
ironing
Rinse
hold
Rinse
sensitive
skin
Intensive
rinse
Pre-
wash
Clean +
SoiledHeavy
soil
Cotton /
(Antibacterial)
 
 
Normally soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and 
linen.
At a temperature of 95°C, this programme eliminates bacteria, ensuring sanitization of your 
laundry. 
11.0
❉
Ye s
❉❉❉❉❉ ❉❉❉❉❉
1200 20 to 95
Coloured
 
Lightly to normally soiled bed linen, table linen, shirts, trousers etc. made of cotton and linen.
10.0
❉
Ye s
❉❉❉❉❉ ❉❉❉❉❉
1200 20 to 40
Synthetics
 
 
Lightly to normally soiled blouses, shirts etc. made of polyester (Diolen, Trevira), polyamide 
(Perlon, Nylon) or blends with cotton.
5.5
❉
Ye s
❉❉❉❉❉ ❉❉❉❉❉
1000
1)20 to 60
Jeans
Normally soiled cotton jeanswear and garments made of robust jeanslike material such as trousers and 
jackets.
11.0
❉
Ye s
❉——❉❉ ❉❉❉❉❉
1200 20 to 60
Daily
 
 
Programme for lightly to normally soiled fabrics made of cotton and/or synthetic fibres.
6.0
—
Ye s
❉—❉❉❉ ❉—❉—❉
1200 20 to 60
Quick wash
 
Lightly soiled overalls and sports wear made of cotton, polyester, polyamide and blends with 
cotton.
6.0
—
Ye s
❉———❉❉—❉—❉
1200 20 to 30
Outdoor
 
Normally soiled and sweaty sportswear made of cotton jersey or microfibres.
Use a special detergent for garments made of microfibres; Do not add any softener.
5.5
❉
Ye s
———❉❉ ❉❉——❉
1000
1)20 to 60
Big items
 
 
Blankets made of synthetic fibres, bedcovers filled with polyester or other artificial fibres, 
sleeping bags, bathmats and similar items.
4.0
❉
Ye s
❉——❉❉ ❉❉—❉❉
1000
1)20 to 95
Delicates
 
Curtains and delicate dresses, skirts, shirts and blouses.
4.0
❉
Ye s
❉—❉❉❉ ❉❉❉—❉
1000
1)20 to 40
Wo o l
Only woollens, labelled with the Woolmark and identified as machine washable.
This programme (40°C) is tested and approved by The Woolmark Company for machine washable 
wool.
3.0
—
Ye s
❉——❉❉ ❉—— —❉
1000
1)20 to 40
Handwash
Textiles made of silk, linen, wool and viscose marked as “handwashable”.
A very gentle spin is used in this programme.
3.0
—
Ye s
❉——❉❉ ❉—— —❉
800
1)
20 to 30
SuperEco
Normally to heavily soiled and robust bed linen, table linen and underwear, towels, shirts etc. 
made of cotton and/or linen.
Economical energy consumption by prolonged wash duration. Ideal to be run overnight to additionally 
profit from the more favourable energy rates. To avoid noise of spinning at night, select “Rinse hold” 
option and start spinning in the morning, or define programme start with “Start delay ” accordingly.
11.0
—
Ye s
❉——❉❉ ❉—❉—❉
1200 20 to 60
Gentle Spin
—
In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.
3.0
—— — — — — — — — — —❉
1000
1)
—
Rinse & Spin
—
Same as the last rinse and the final spin in the “Coloured” programme.
11.0
——❉———❉❉—— —❉
1200
—
Drain & Spin
—
Use this programme to drain your washer or to drain and spin your wash load.
Delicate fabrics, handwashables and woolens should be drained with no spin or low spin speed to avoid fabric 
stress.
11.0
—— — — — — — — — — —❉
1200
—
A. “On/Off” button
B. Programme selector
C. “Start (Pause)” button
D. Option buttons
E. Modifiers
F. “Start delay” button
G. “Favourites” button
H. “Reset (Drain)” button
I. Programme sequence indicator
J. Overdosage indication
Selecting any option the indication lights up. When the 
combination of programme, additional options/modifiers 
and temperature is not possible, the indication lights 
switch off automatically and a signal sounds.❉ : optional / Yes: dosing required.
F
C
D
B
A
HD
}
E
}
G
I/J
30115263GB.fm  Page 1  Tuesday, April 19, 2011  12:21 PM
Black process 45,0° 150,0 LPI 
 
						

							Whirlpool is a registered trademark of Whirlpool USA
5019 301 15263
Add the detergent as described in the programme table or in the 
chapter “Detergent and Additives” in your Instructions for Use.
1. Press “On/Off”   to switch on the washer. The light of the 
selected programme is on, and the “Start (Pause)” button 
 blinks.
2. Turn the programme selector to the desired programme - 
it is marked by a light.
3. The predefined temperature and spin speed can be altered 
by pressing the “Temperature”   and the “Spin speed” 
 modifier.
Selecting any option or modifier, the indication lights up. If 
the combination of programme, options or modifiers is not 
possible, the indication lights switch off automatically and a 
signal sounds.
“Rapid” button
• Enables quicker washing by shortening the programme 
duration.
• Recommendable for lightly soiled laundry.
“Easy ironing” button
• Reduces creasing by increased water quantity and a very gentle 
spin. 
“Rinse hold” button
• The laundry remains in the last rinse water without being spun: 
this prevents creasing and colours from changing.
• Particularly useful if you want to postpone spinning to a later 
time, or if you want to drain only.
• Do not leave the laundry to soak in the rinse hold for too long.Note: The programme starts to “Rinse hold” when the “Rinse 
hold” button light blinks; the “Start (Pause)” button light   also 
blinks.
Terminate the “Rinse hold” option  :
• Press the “Rinse hold” or the “Start (Pause)” button  ; the 
programme will terminate automatically with the final spin 
cycle for the present wash programme.
• If you do not wish to spin the clothes,  press and hold the 
“Reset (Drain)” button   for a few seconds. The water 
is drained out then, before the door can be opened.
“Spin speed” modifier
• Every programme has an automatic predefined  spin speed.
• Press the button to set another spin speed.
• Spin speed “0” is only selectable for programme “Drain & 
Spin”; the final spinning is cancelled in this case - the water is 
drained out only at the end of the programme.
“Rinse” modifier 
•  “Sensitive skin”: maximum amount of rinse water is 
added, and rinse cycle is prolonged.
•  “Intensive rinse”: more rinse water is added, and rinse 
cycle is prolonged.
• Particularly suitable for areas with very soft water, for baby 
clothes or to help people with skin allergies.
“Options” modifier
 Prewash  :
• Adds a prewash cycle to the programme selected.
• Use only for heavily soiled loads (e.g. sand, granular dirt).
• Increases the cycle time by approx. 15 minutes.
• Do not use liquid detergent for the main wash when activating 
“Prewash”.CONSUMPTION DATA
Programme
Te m p e r a t u r e
(°C)
Load
(kg)
Wa te r
(l)
Energy
(kWh)
Approximate programme duration
 (hours : minutes)
without “Rapid”
with “Rapid”
Cotton
*
60 11.0 81 1.32 4:00 2:25o
Cotton
*
60 5.5 53 1.04 3:45
Cotton
*
40 5.5 54 0.78 3:40
Colouredo40 10.0 86 0.90 2:35 2:10
Coloured 40 5.5 57 0.69 1:39
Coloured 40 3.5 43 0.58 1:27
Coloured 40 1.0 26 0.39 0:40
Syntheticso40 5.5 69 0.65 1:55 1:40
Synthetics 40 3.0 42 0.60 1:23
Jeans 40 11.0 118 0.97 2:00 —
Daily 40 6.0 60 0.81 1:00 —
Quick wash 30 6.0 44 0.44 0:30 —
Outdoor 30 5.5 61 0.51 1:30 —
Big items 40 4.0 84 0.83 1:20 —
Delicates 30 4.0 80 0.50 0:50 —
Wo o l 40 3 .0 69 0 .7 8 0 : 45 —
Handwash 30 3.0 97 0.49 0:40 —
SuperEco 60 11.0 96 1.54 5:10 —
Prewash cycle increases programme duration by approximately 15 min. Consumption values were measured in normalized conditions in compliance with 
Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and 
temperature, the load and the type of wash. Water and energy consumption refer to the default setting of the programmes, with the temperatures indicated in 
the table; changing the options or modifiers setting will also change the consumption data.
The remaining time indicator can deviate from the values in the table, because it takes into account the operating conditions at that time (see also 
“Troubleshooting Guide” in your Instructions for Use).
*  Reference programmes for Energy Label.
**  Automatic adaptation of programme duration after detection of wash load.o  Recommended programmes for comparative tests at test institutes
**
**
**
**
**
**
ADD DETERGENT, CLOSE THE DOOR AND 
SELECT THE PROGRAMMESELECT ANY DESIRED OPTION OR MODIFIER
➡
 Clean + 
• Choose this option if you use an in-wash additive for stain 
removal (powder, for example “Vanish”) - it will optimize the 
additive’s efficiency to get better wash performance and stain 
removal.
• Use with maximum load.
• Add an appropriate amount of in-wash additive for stain 
removal (powder) to the main wash chamber, together with 
your detergent (only use powder detergent with this option). 
Respect the manufacturer’s dosing instructions.
• May prolong the programme by up to 15 minutes.
• Appropriate for use of stain removers and bleaches on oxygen 
basis. Chlorine or perborate bleaches must not be used!
 Normal
“Soil level” modifier 
• Adapts the programme duration to the soil level of your 
laundry.
 = Normal /   = Soiled /   = Heavy soil
If there is a programme setting which you use frequently, the 
washing machine offers the possibility to save one setting for each 
programme so that it can be used again by just pushing one button.
• Select the desired programme, temperature, spin speed and 
options/modifiers.
Press and hold the “Favourites” button   for some seconds; the 
light goes on and a signal sounds when the programme setting is 
saved.
Next time you want to use your individual programme setting, turn 
the programme selector to the desired programme, shortly push 
the “Favourites” button   and start by pressing “Start 
(Pause)” .
If you want to replace the saved setting by another one:
• Select the programme desired and the new temperature, spin, 
options/modifer setting.
• Press and hold the “Favourites” button   some seconds; 
the previously saved  setting is replaced by the new one.
The “Start delay”   allows to run the machine at the consumer’s 
convenience, for example at night when electricity is cheaper.
• Select programme, temperature and options/modifiers as 
desired.
• Press the “Start delay ” button to select the delay time by 1 to 
24 hours.
• Press and hold the “Start (Pause)” button  ; the 
countdown of the delay time begins. The light of the “Start 
delay ” button will keep blinking until the programme starts.
• The time delay indication disappears when the programme 
starts and it is replaced by the remaining time.
To cancel the “Start delay”:
•Press “Start (Pause)”  , or press and hold “Reset (Drain)” 
 - the delay time will disappear from the display.
Turn on the tap and press and hold the “Start (Pause)” button 
 - the blinking “Start (Pause)” button light   becomes 
constant; it will take some time until water enters into the washing machine.
The programme sequence indicator on the display shows the 
sequence reached in the programme. After starting the 
programme, the indication runs from left to right through prewash, 
wash, rinse, spin. When a programme sequence is finished, the 
corresponding symbol goes off.
The display shows the remaining programme time. Due to 
variations in load and temperature of inlet water, the remaining 
time is newly calculated in certain programme phases. If this is the 
case, an animation appears on the display and the “6
th Sense” 
symbol  lights up.
As soon as a programme starts, the “Door locked” symbol   lights 
up on the display.
You can interrupt the programme by pressing “Start (Pause)” 
 - the light blinks. The “Door locked” symbol   on the display 
goes off and you can open the door. In certain programme phases, 
the “Door locked” symbol   remains lit to show that the door 
cannot be opened in the present programme phase, e.g. when the 
water level is too high.
To continue the programme, just close the door and press “Start 
(Pause)”  again.
“End” appears on the display, and a signal sounds.
1. Switch the machine off by pressing “On/Off”  (if you do 
not, the machine will  switch off automatically about 5 minutes 
after programme end).
2. Turn off the tap and open the door to unload your washing. 
Leave the door open for some time so that the washer’s inside 
can dry.
The symbol will light up if you used too much detergent. Use less 
detergent next time. If the symbol lights up and the display shows 
“Fod”, too much foam interrupted the wash process; refer to the 
“Troubleshooting Guide” in your Instructions for Use.
1. Press the “Start (Pause)” button   to interrupt the 
programme. The light blinks.
2. Select the new programme, temperature and options/
modifiers as desired.
3. Press and hold the “Start (Pause)” button   again. The 
new programme continues at the same position where the 
previous programme was interrupted. Do not add detergent 
for this programme.
Press and hold the “Reset (Drain)” button   for a few 
seconds; the light blinks. It will take some time until the water is 
drained out and the door can be opened (up to 10 minutes). 
Caution, the washing might still be hot!
SAVE YOUR FAVOURITE PROGRAMMES START DELAY PROGRAMME START➡➡
ADD WASHING/DOOR LOCKPROGRAMME ENDDETERGENT OVERDOSAGE INDICATIONCHANGE THE PROGRAMME, TEMPERATURE, 
OPTIONS AFTER PROGRAMME STARTRESET A RUNNING PROGRAMME BEFORE 
THE END
For any failures or irregularities, consult the “Troubleshooting Guide” in your Instructions for Use.30115263GB.fm  Page 2  Tuesday, April 19, 2011  12:21 PM
Black process 45,0° 150,0 LPI