Whirlpool Awg 218 Instructions For Use

							3
INSTRUCTIONS FOR USE
BEFORE USING THE APPLIANCE...................................... PAGE 4
SAFEGUARDING THE ENVIRONMENT........................... PAGE 4
PRECAUTIONS AND GENERAL 
RECOMMENDATIONS
........................................................... PAGE 5
CONTROL PANEL DESCRIPTION...................................... PAGE 6
USE OF ICE MAKER AND WATER DISPENSER.............PAGE 9
WATER FILTER (SELECT MODELS).................................PAGE 10
GUIDE TO INTERNAL COMPONENTS..........................PAGE 11
GUIDE TO STORAGE AND THAWING OF 
FOOD
.......................................................................................... PAGE 16
MAINTENANCE AND CLEANING...................................PAGE 18
TROUBLESHOOTING GUIDE/AFTER-SALES 
SERVICE
..................................................................................... PAGE 19
AFTER-SALES SERVICE........................................................PAGE 20
INSTALLATION.......................................................................PAGE 21
WATER CONNECTION........................................................PAGE 28
ELECTRICAL CONNECTION..............................................PAGE 29
31102001GB.fm  Page 3  Tuesday, August 16, 2005  10:32 AM
 
						

							4
BEFORE USING THE APPLIANCE
SAFEGUARDING THE ENVIRONMENT
•
Your new appliance is designed exclusively for 
domestic use
To get the most out of your new appliance, 
read the user handbook thoroughly. The 
handbook contains a description of the 
appliance and useful tips for storing food.
Keep this handbook for future consultation.1.
After unpacking, make sure that the appliance 
is undamaged and that the door closes 
properly. Any damage must be reported to 
your dealer within 24 hours after delivery of 
the appliance.
2.
Wait at least two hours before switching the 
appliance on in order to ensure the refrigerant 
circuit is fully efficient.
3.
Installation of the appliance and electrical 
connections must be carried out by a qualified 
electrician, in accordance with the 
manufacturer’s instructions and local safety 
regulations
4.
Clean the inside of the appliance before using it.
1. Packing 
The packaging material is entirely recyclable, 
and marked with the recycling symbol. Follow 
local regulations for scrapping. Keep the 
packaging materials (plastic bags, polystyrene 
parts, etc.) out of reach of children, as they are 
potentially dangerous.
2. Scrapping
The appliance is manufactured using recyclable 
material. 
This appliance is marked according to the 
European directive 2002/96/EC on Waste 
Electrical and Electronic Equipment (WEEE).
By ensuring this product is disposed of correctly, 
you will help prevent potential negative 
consequences for the environment and human 
health, which could otherwise be caused by 
inappropriate waste handling of this product. 
The symbol   on the product, or on the 
documents accompanying the product, indicates 
that this appliance may not be treated as 
household waste. Instead it shall be handed over 
to the applicable collection point for the 
recycling of electrical and electronic equipment. 
Before scrapping, make the appliance unusable 
by cutting off the power cable and removing the 
doors and shelves so that children cannot easily 
climb inside the appliance. 
Disposal must be carried out in accordance with 
local environmental regulations for waste 
disposal. Deliver the appliance immediately to 
an authorized dump; do not leave it unattended 
even for a few days, since it is potentially 
dangerous for children. For more detailed 
information about treatment, recovery and 
recycling of this product, please contact your 
local city office, your household waste disposal 
service or the shop where you purchased the 
product.Information:
This appliance does not contain CFCs (replaced 
with R134a) or HFCs (replaced with R600a). 
Appliances with Isobutane (R600a):
isobutane is a naturally occurring, low 
environmental impact gas. Caution is required, 
however, because isobutane is flammable. 
Therefore, it is essential to ensure that 
refrigerant pipelines are not damaged.
Declaration of conformity

This appliance is designed to store food and is 
manufactured in conformity with European 
Directive 90/128/EEC, 02/72/EEC and 
Regulation (EC) No. 1935/2004

This appliance is designed, manufactured, and 
retailed in compliance with:
- the safety objectives of the Low Voltage 
Directive 73/23/EEC;
- the protection requirements of the “EMC” 
Directive 89/336/EEC
amended by Directive 93/68/EEC.

The electrical safety of the appliance can only 
be guaranteed if the product is connected to 
an approved earth connection.
31102001GB.fm  Page 4  Tuesday, August 16, 2005  10:32 AM
 
						

							5
PRECAUTIONS AND GENERAL 
RECOMMENDATIONS

Use the refrigerator compartment only for 
storing fresh food and beverages and use the 
freezer compartment only for storing frozen 
food, freezing fresh food and making ice 
cubes.

After installation, make sure that the 
appliance is not standing on the power supply 
cable.

Do not store glass containers with liquids in 
the freezer since they may burst.

Do not eat ice cubes or ice lollies immediately 
after taking them out of the freezer since they 
may cause cold burns.

Before carrying out any maintenance or 
cleaning, always unplug the appliance or 
disconnect the power supply.

Make sure that your appliance is not near a 
heat source.

Do not store or use gasoline or other 
flammable vapours and liquids in the vicinity of 
this or any other appliance. The fumes can 
create a fire hazard or explosion.

To ensure proper ventilation, leave a gap on 
both sides and above the appliance.

Ensure that the vent outlets on the appliance 
casing or housing unit are unobstructed in 
order to allow correct air circulation.

All appliances equipped with an ice maker or 
water dispenser must be connected to a 
mains water supply that delivers potable 
water only (with water pressure between 2.4 
and 8.3 bar (35 and 120 PSI)). Ice makers and/ 
or water dispensers not directly connected to 
a mains water supply must be filled with 
potable water only.

Install and level the appliance on a floor strong 
enough to take its weight and in an area 
suitable for its size and use.

Install the appliance in a dry and well-
ventilated place The appliance is set for 
operation at specific ambient temperature 
ranges, according to the climatic class 
indicated on the data plate: The appliance may 
not work properly if it is left for a long period 
at a temperature above or below the 
indicated range.

Be careful not to damage the floors when you 
move the appliance (e.g. parquet flooring).

Do not use mechanical devices or any means 
other than those recommended by the 
manufacturer to speed up the defrosting 
process.

Do not damage the refrigerant circuit.

Do not use electrical appliances inside the 
freezer compartments, unless such appliances 
are specifically recommended by the 
manufacturer.

This appliance is not designed for use by 
young children or the infirm.

To avoid the risk of children being trapped 
and therefore suffocating, do not allow them 
to play or hide inside the appliance.

The power cable may only be replaced by an 
authorized person.

Do not use extension leads or adapters.

It must be possible to disconnect the 
appliance from the mains by unplugging it or 
by means of a two-pole switch fitted upline of 
the socket.

Ensure that the voltage indicated on the 
appliance data plate corresponds to the 
domestic supply voltage

Do not ingest the contents (non-toxic) of the 
ice packs (if provided).

Do not place fingers or hands on the 
automatic ice making mechanism while the 
refrigeration is plugged in. This will help 
protect you from possible injury. It will also 
prevent interference with m o v i n g  p a r t s  o f  t h e  
ejector mechanism and the heating element 
that releases the cubes.

To prevent accidental child entrapment or 
suffocation risk, do not remove the divider in 
the top freezer basket.

Do not turn the ice maker on until it is 
connected to the water supply.
Climatic class Amb. T. (°C) Amb. T. (°F)
SN From 10 to 32 From 50 to 90
N From 16 to 32 From 61 to 90
ST From 18 to 38 From 64 to 100
T From 18 to 43 From 64 to 110
31102001GB.fm  Page 5  Tuesday, August 16, 2005  10:32 AM
 
						

							6
CONTROL PANEL DESCRIPTION
The control Panel is located at the top front of the refrigerator compartment.
Temperature Controls
For your convenience, your temperature controls are preset at the factory. When you first install your 
refrigerator, make sure the controls are still set to the recommended set points as shown.
Recommended Settings
IMPORTANT: 

Wait 24 hours for your refrigerator to cool 
completely before adding food. If you add food 
before the refrigerator has cooled completely, 
your food may spoil.

If the temperature is too warm or too cold in the 
refrigerator or freezer, first check the air vents to 
be sure they are not blocked before adjusting the 
controls. See “Ensuring Proper Air Circulation”.
To Turn Your appliance Off/On:

Press the freezer (+) touch pad repeatedly until 
“OFF” appears in the freezer display. Allow a few 
seconds for the refrigerator to shut off. Neither 
compartment will cool.

Press either the refrigerator or freezer (-) touch 
pad to turn on the appliance.
Adjusting Controls
The REFRIGERATOR control adjusts the 
refrigerator compartment temperature. The 
FREEZER control adjusts the freezer compartment 
temperature. If you need to adjust the temperature 
in either the refrigerator or freezer compartment, 
use the settings listed in the chart as a guide.
To Adjust Set Point Temperatures:

Press the (+) or (-) touch pads until the desired 
temperature set point is displayed.
NOTE:
 Except when first turning on the refrigerator, 
do not adjust either temperature control more than 
one setting at a time. Wait 24 hours for the 
temperature to stabilize between adjustments.
31102001GB.fm  Page 6  Tuesday, August 16, 2005  10:32 AM
 
						

							7
Fast Cooling & Fast Freezing
The Fast Cooling & Fast Freezing feature assists with periods of high refrigerator 
use, full grocery loads, or temporarily warm room temperatures.

Press the Fast Cooling & Fast Freezing touch pad to set the freezer and 
refrigerator to the lowest temperature settings. Press the Fast Cooling & Fast 
Freezing touch pad again to return to the normal refrigerator set point.
NOTE:
 The Fast Cooling & Fast Freezing feature will automatically shut off in 
approximately 12 hours.
Quick Ice
The Quick Ice Feature assists with temporary periods of heavy ice use by increasing 
ice production.

Press the Quick Ice Feature touch pad to set the freezer to the lowest 
temperature setting. Press the Quick Ice Feature touch pad again to return to the 
normal freezer set point.
NOTE:
 The Quick Ice Feature will automatically shut off in approximately 24 
hours.
Vacation Mode
In Vacation Mode, the freezer will not automatically defrost as often to conserve 
energy.

Press the Vacation Mode touch pad until the indicator light is lit to turn on this 
feature. Press the Vacation Mode touch pad again or open the refrigerator door 
to turn off this feature.
NOTE:
 The refrigerator door may be opened within 1 hour of setting Vacation 
Mode without turning off the feature.
Temp Alarm
The Temperature Alarm combines power outage and warm alarm features.
Power Outage
During a power outage, if the temperatures in the refrigerator and freezer 
compartments exceed normal operating temperatures, the highest temperature 
reached will be displayed.

Press the Temp Alarm touch pad until the indicator light is lit,to turn on this 
feature. Press and hold Temp Alarm for 3 seconds until the indicator light goes 
off to turn off this feature.
Warm Alarm
An alarm will sound repeatedly if the freezer or refrigerator compartment 
temperatures exceed normal operating temperatures for an hour or more. 
The temperature displays will alternately show the current temperatures and the 
highest temperatures the compartments reached when the power was out.
Press the Temp Alarm touch pad once to stop the audible alarm and alternating 
temperature displays. The Temp Alarm light will continue to flash until the 
refrigerator temperature stabilizes.
Door Alarm
The Door Alarm feature sounds a chime every few seconds when the refrigerator 
door has been left open for 5 continuous minutes.
The chime will sound until the door is closed or Door Alarm is turned off.
Press the Door Alarm touch pad to turn this feature on or off. The indicator light 
will be lit when the Door Alarm feature is on.
Water Filter Status Lights and Filter Reset (select models) 
The water filter status light will help you know when to change the water filter. 
When the yellow (Order) light is on, it is almost time to change the water filter. 
When the red (Replace) light is on, a new water filter should be installed. See 
“Water Filtration System.”
After replacing the water filter, press and hold FILTER RESET for 3 seconds until 
the Order or Replace light turns off.
31102001GB.fm  Page 7  Tuesday, August 16, 2005  10:32 AM
 
						

							8
Water Dispenser
(select models)
If you did not flush the water system when the refrigerator was first 
installed, dispense water into a container until you draw and discard 2 
to 3 L (8 to 12 gal.) or for approximately 6 to 7 minutes after the water 
begins dispensing. The water you draw and discard rinses the pipes. 
Allow several hours for the refrigerator to cool down and chill water.
Dispensing Water
1.
Hold a container under the dispenser while pressing the button.
2.
Release the button to stop dispensing.
NOTE:
 Dispense enough water every week to maintain a fresh 
supply.
User Preferences
The control center allows you to set user preferences, if desired.
Temperature Display (C_F)
This preference allows you to change the temperature display.
C - Temperature in degrees Celsius
F - Temperature in degrees Fahrenheit
Alarm (AL)
This preference allows you to turn off the sound of all alarms.
ON - You will hear the alarm sound.
OFF - You will not hear the alarm sound.
Sabbath Mode (SAB)
IMPORTANT:
 This preference does not disable interior lights.
ON - All control panel lights will be disabled.
OFF - All control panel lights will be enabled.
NOTE:
 Press any touch pad on the control panel to restore the 
control panel lights.
To Access the User Preferences Menu:
1.
Press and hold the Door Alarm touch pad for 3 seconds. The 
preference name will appear in the Freezer display and the 
preference status (C or F) or (ON or OFF) will appear in the 
Refrigerator display.
2.
Use the Freezer (+) or (-) touch pads to scroll through the 
preference names. When the desired preference name is displayed, 
press the Refrigerator (+) or (-) touch pads to change the 
preference status.
3.
Set your preferences by pressing and holding the Door Alarm touch 
pad for 3 seconds, or by shutting the refrigerator compartment door.
31102001GB.fm  Page 8  Tuesday, August 16, 2005  10:32 AM
 
						

							9
USE OF ICE MAKER AND WATER DISPENSER
Automatic Ice Maker
Connect the ice maker to the water supply as instructed. Proper 
water flow and a level refrigerator are essential for optimal ice 
maker performance.
Ice Maker Operation
To turn ice maker On push arm down from locked position.

Lift arm up and lock into position to turn ice maker Off.
Operating Instructions
Confirm ice bin is in place and ice maker arm is down.

After freezer section reaches between -17° to -18° C (2° to 0° F), 
ice maker fills with water and begins operating. You will have a 
complete harvest of ice approximately every three hours.

Allow approximately 24 hours after installation to receive first 
harvest of ice.

Discard ice created within first 12 hours of operation to assure 
system is flushed of impurities.

Stop ice production by raising ice maker arm until click is heard.

Ice maker will remain in the off position until arm is pushed down.

The first one or two batches will probably contain undersized and 
irregular cubes because of air in the supply line.

When the ice cubes are ejected it is normal for several cubes to be 
joined together at the ends. They can easily be broken apart. 
The ice maker will continue to make ice until the supply of ice cubes 
raises the ice maker arm, shutting the ice maker off.

Certain sounds may accompany the various cycles of the ice maker. 
The motor may have a slight hum, the cubes will rattle as they fall 
into an empty storage pan and the water valve may click or “buzz” 
occasionally.

If the ice is not used frequently, the ice cubes will become cloudy, 
shrink, stick together and taste stale. Empty the ice storage bin 
periodically and wash it in lukewarm water. Be sure to dry the bin 
thoroughly before replacing it.

Beverages and foods should not be placed in the ice storage bin for 
quick chilling. These items can block the ice maker arm, causing the 
ice maker to malfunction.

Turn off (arm up) the ice maker when the water supply is to be shut 
off for several hours.
To Remove the Ice Bin:
Pull it forward, away from the ice maker. To avoid the ice maker 
dumping ice while the bin is removed, turn the ice maker off by 
raising the ice maker arm.
To Install the Ice Bin:
Reverse the above procedure. Turn the ice maker on by lowering 
the ice maker arm.
Water Dispenser (select models)
The Water Dispenser is located on the left side wall of the fresh 
food section. This design is for cold water dispensing only.
To Dispense Water:
Hold container under spout and press dispenser pad.
31102001GB.fm  Page 9  Tuesday, August 16, 2005  10:32 AM
 
						

							10
WATER FILTER (SELECT MODELS)
Water Filter Removal and Installation
If your appliance must be connected to the mains water supply to 
operate the water dispenser and/or ice maker, it must be a water 
supply which delivers potable water only. Ice makers not connected 
to a mains water supply must be filled with potable water only.
Initial Installation
The water filter is located in the upper right-hand corner of the fresh 
food compartment.
1.
Remove blue bypass cap and retain for later use.
2.
Remove sealing label from end of filter and insert into filter head.
3.
Rotate gently clockwise until filter stops. Snap filter cover closed.
4.
Reduce water spurts by flushing air from system. Run water 
continuously for two minutes through dispenser until water runs 
steady. During initial use, allow about a one- to two-minute delay in 
water dispersal to allow internal water tank to fill.

Additional flushing may be required in some households where 
water is of poor quality.
Replacing Water Filter
IMPORTANT: Air trapped in system may cause water and 
cartridge to eject. Always dispense water for at least 2 minutes 
before removing the filter for any reason. Use caution when 
removing.
1.
Turn filter counterclockwise until it releases from filter head.
2.
Drain water from filter into sink, and dispose in normal household 
trash.
3.
Wipe up excess water in filter cover and continue with Initial 
Installation, steps 2 through 4.
IMPORTANT: 
Condition of water and amount used determines life 
span of water filter cartridge. If water use is high, or if water is of poor 
quality, replacement may need to take place more often.
To purchase a replacement water filter cartridge, contact your dealer.
The dispenser feature may be used without a water filter cartridge. If 
you choose this option, replace filter with blue bypass cap.
NOTES:
1.
The bypass cap does not filter water. Be sure to have replacement 
cartridge available when filter change is required.
2.
If water filtration system has been allowed to freeze, replace filter 
cartridge.
3.
If system has not been used for several months, or water has an 
unpleasant taste or odor, flush system by dispensing water for two 
to three minutes. If unpleasant taste or odor persists, change filter 
cartridge.
31102001GB.fm  Page 10  Tuesday, August 16, 2005  10:32 AM
 
						

							11
GUIDE TO INTERNAL COMPONENTS
Shelves
Never attempt to adjust a shelf that is loaded with food 
(except in the case of the lift shelf).

Confirm shelf is secure before placing items on shelf.
Your refrigerator has either spill guard glass shelf
 or non-
sealed Shelves
. The spill guard glass shelf shelves have a spill 
retainer edge which allows for easier clean up and some are 
equipped with the Easy Glide
 slide out feature. To slide out 
(select models), grasp the front of the shelf and pull forward. 
Push in the shelf to return to the original position.
To Remove a Shelf:

Slightly tilt up the front and lift up the rear of the shelf, then 
pull the shelf straight out.
To Lock the Shelf Into Another Position:

Tilt up the front edge of the shelf.

Insert the hooks into the desired frame openings and let the 
shelf settle into place.

Be sure the shelf is securely locked at the rear.
Lift Shelf (select models)
The fresh food compartment is equipped with an lift
 shelf.
This shelf can be adjusted up or down without having to be 
unloaded of its contents. To adjust an lift shelf, pull out the knob 
on the crank handle. Rotate the crank clockwise to raise the 
height of the shelf, and counterclockwise to lower the height of 
the shelf.
Note

Do not raise the shelf to the very top of the vertical rails, as 
the shelf may become jammed.
To Remove: 
Completely unload the shelf and pull the shelf forward. 
When the shelf stops, press up on the tabs located underneath 
its outside edges, then continue pulling forward, clear of the 
frame. 
To Install: 
Align the shelf to the frame and push it all the way back. 
(There is no need to depress the tabs for reinstallation). 
In ordinary use, the lift shelf frame assembly does not
 require 
removal. Though unlikely, and not recommended, the correct 
removal procedure is as follows: 
To Remove: 

Unload the shelf completely. 

Remove glass shelf by pulling forward. When shelf stops lift up 
and continue pulling forward. 

Manually move the two rear latches toward the shelf center. 

While supporting the entire shelf and frame from underneath, 
lift slightly and rotate the assembly approximately 30° to allow 
the rear mechanism to clear the vertical rear side rails. 

The entire assembly can then be moved forward and clear of 
the refrigerator compartment. 
31102001GB.fm  Page 11  Tuesday, August 16, 2005  10:32 AM
 
						

							12
To Install: 

Reverse the removal procedure. Be sure the shelf is in a level 
position. 

When the sliding shelf is pushed to the rear, it will reposition 
the rear latches to their correct operating position.
The Crisper Top
 serves as the lower fresh food shelf. 
To Remove the Crisper Top: 

Remove crisper drawers as indicated on page 11. 

Place hand under the frame to push up the glass. Lift glass out. 

Lift frame from refrigerator liner rails. 
To Install: 

Repeat above instructions in reverse order. 
Door Storage 
Dairy Compartment 
The Dairy Compartment
 provides convenient door storage 
for spreadable items such as butter and margarine. This 
compartment can be moved to different locations to 
accommodate storage needs. To use the dairy compartment, 
raise the cover. 
To Remove: 

Raise the cover, pull upward and tilt out. 
To Install: 

Reverse above procedure. 
Door Buckets 
Door Buckets
 can be moved to meet storage needs. 
To Remove: 

Slide bucket up and pull straight out. 
To Install: 

Slide bucket in and down until firmly seated in the door liner. 
Full-width Door Shelf 
Full-width Door Shelf
 removes for easy cleaning. 
To Remove: 

Slide shelf up and pull straight out. 
To Install: 

Reverse above procedure
Storage Drawers 
Snack Drawer (select models) 
The Snack Drawer
 can be used for storage of miscellaneous 
items or extra produce. 
To Remove: 

Pull drawer out to full extension. Tilt up front of drawer and 
pull straight out. 
To Install: 

Insert drawer into frame rails and push back into place. 
31102001GB.fm  Page 12  Tuesday, August 16, 2005  10:32 AM