Whirlpool Awe 9723 Programme Chart Manual

							5019 312 10276
Whirlpool is a registered trademark of Whirlpool USA
For further details please refer to the User Guide
N.B. This appliance is controlled by sensors. Please avoid excessive detergent dosing.
❉ : option / Yes: dosing required
Programme
Care 
Labels
Type of wash / Notes
Max. 
load
kg
Detergents and additives
Special Options
Tempera-
ture
°C
Max. 
Spin 
Speed
rpm
Prewash
Main
Was h
Softener
Bleach
Easy 
Ironing
Eco plus
Prewash
Intensive
Rinse
Rinse 
Hold
Spin Speed
Reduction
Start
Delay
Cotton
 Normally to heavily soiled bed linen, table linen and underwear, 
towels, shirts etc. made of cotton and linen.
For heavily soiled laundry the additional “Prewash” option can be 
selected as well.
5.0
❉ 1)
Ye s
❉❉❉❉❉ ❉ ❉ ❉ ❉
20 to 90 1200
Synthetics
Normally soiled blouses, shirts, overalls etc. made of polyester 
(Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.
2.0
❉ 1)
Ye s
❉—
❉❉ ❉ ❉ ❉ ❉ ❉
20 to 60
1000
2)
Daily Mixed
Slightly to normally soiled textiles made of cotton and/or synthetics
3.0
—
Ye s
❉—
❉——
❉❉ ❉ ❉
30 to 60 1200
 Rapid
Shortly worn outer clothing made of cotton, polyester, polyamide or 
blends with cotton.
3.0
—
Ye s
❉——— — —
❉❉ ❉
20 to 30 1200
Delicates
Curtains and delicate clothing, dresses, skirts, shirts and blouses.
1.5
❉ 1)
Ye s
❉———
❉—
❉❉ 
2)
❉
20 to 40
800
2)
Handwash
Textiles made of silk, linen, wool and viscose marked as “handwashable”.
If you select “Rinse Hold” do not leave items to soak for too long.
1.0
—
Ye s
❉——— — —
❉— 
3)
❉
20 to 30
—
3)
Wool
Only woollens with a felt-free finish, labelled with the woolmark and 
identified as machine washable.
If you select “Rinse Hold” do not leave items to soak for too long.
1.0
—
Ye s
❉——— — —
❉❉
 2)
❉
20 to 40
800
2)
Rinse + Spin
—Programme for treating the laundry with starch and softener or to moisten 
the laundry. For delicate laundry reduce the spin speed to 400 - 800 rpm.
5.0
—
Ye s
❉——— —
❉❉ ❉ ❉—
1200
Spin
—Programme to spin cotton or linen laundry intensively with maximum 
spin speed.
5.0
—— ———————
❉❉—
1200
Gentle spin
—Programme to spin delicate laundry gently with a restricted spin speed.
1.5
—— ———————
❉ 
2)
❉—
800
2)
Drain
—Drain only - no spinning. Alternative method of terminating programme 
after “Rinse Hold”.
—— — ————— — — —
❉——
A. Temperature Adjustment Button 
B. Programme Sequence Indicators
C. Start/Pause button (press to start or pause 
programme)
D. Water tap indicator (lights up when water inlet is 
closed, please open tap)
E. Reset buttonWhen you select an option, the corresponding 
indicator lights up, except if the combination of 
programme, additional options and temperature is 
not possible.
C ABED
Favorites Button You have the possibility to store preferred programme and option 
combinations. For further details please refer to User guide.6th Sense 
Lights up when time, energy and water settings are being 
automatically updated to optimise the washing performance.Drum Up Lights up during the automatic re-adjustment of the drum opening.Reset Button When selected before start button is pressed all selections and 
options are resetted.
When selected after start button is pressed water is drained for 
about 2 minutes and End symbol will light up. New programme 
and options can be selected.End  Appears in display when programme is ended and drum opening 
is in position.
AWE 9723
GB
1Do not use liquid detergents.2For improved garment care spin speed is restricted to lower spin speed in this programme.3For improved garment care spin speed is zero in this programme.
 
						

							5019 312 10276
Whirlpool is a registered trademark of Whirlpool USA
Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized 
conditions in compliance with standard IEC 60 456. Consumption data in the home may vary with respect to the values in the 
table in relation to the water supply pressure and temperature, the load and the type of wash.
* The remaining time indicator can similarly deviate from the values in the table, because it takes into account the 
household conditions applicable at that time.
** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains 
the water out.
***Reference Programme for Energy Label1. Close the drum door flaps and check that they are 
properly locked.
2. Add detergents and additives into the dispenser to 
no more then the “MAX”
 level mark, as follows:
 Programme with pre and main wash
 Main wash programme without prewash
 Fabric softeners and conditioners
 Chlorine bleach
Stain remover agents
 Anti-scale agents (if necessary)
3. Turn the programme selector knob
 to the 
desired programme. 
The remaining time of the chosen programme is 
shown in the display (in hours and minutes) and 
the indicator light of the “Start/Pause”
 button 
flashes. 
The predefefined temperature & spin speed 
corresponding to the selected programme are 
indicated in the display. The temperature (+/-
) 
and spin speed   can be changed by pressing 
the corresponding button.
When you select an option authorized by the 
programme, the corresponding indicator lights up, 
except if the combination of programme, 
additional options and temperature is not possible.“Easy Ironing” button
 Can be used together with “Cotton”, “Synthetic” and 
“Daily Mixed” programmes to make ironing easier.
 Increases the water quantity in rinsing and the 
clothes are spun in a softer manner.
“Eco plus” button
 With a modified temperature profile and a slightly 
prolonged washing duration, the optimum 
combination of excellent washing result and even 
lower energy consumption can be achieved.
“Prewash” button
 Only for heavily soiled loads (for example mud, 
granular dirt).
“Intensive Rinse” button
 The amount of water is increased to ensure a 
more intensive rinse.
 This option is particularly suitable for areas with 
very soft water or washing linen laundry for 
people with skin allergies.
“Rinse Hold” button
 The laundry remains in the last rinse water 
without progressing to the final spin cycle to avoid 
creasing from fading.
 This option is particularly recommended for the 
“Synthetic”, “Delicate” and “Daily Mixed” 
programmes.
 Use this option if you want to postpone spinning 
to a later time, or if you want to drain only.CONSUMPTION DATA
Programme
Temperature Selector
(°C)
Load
(kg)
Wa t e r
(l)
Energy 
(kWh)
Approx. Programme
Duration
(hours : minutes)*
Cotton 90/40 5.0 49**/48 1.60/0.60 2:05/2:00
Cotton 60 5.0 48 0.95 2:05
Cotton with Eco plus*** 60 5.0 48 0.85 2:10
Daily Mixed 40 3.0 45 0.45 1:00
Synthetics 60/40 2.0 55/50 0.70/0.50 1:30/1:15
Rapid Plus 30 3.0 35 0.40 0:30
Delicates 40 1.5 50 0.50 0:45
Wool 40 1.0 50 0.50 0:45
Handwash 30 1.0 35 0.40 0:35
PREPARATION OF WASH CYCLESELECT THE DESIRED OPTION
Note:
 The programme with “Rinse Hold” stops 
when the “Rinse Hold”   is indicated in the 
display.
Appliance in “Rinse Hold”:
 If you want  to continue the programme press 
the “Start/Pause”
 button again: The 
programme will terminate automatically with 
the selected spin cycle.  If the load is dry then 
please press the “Start/Pause”
 button.
 If you do not wish to spin the load, turn the 
programme selector knob to the “Drain” 
programme and press the “Start/Pause”
 button.
“Spin Speed Reduction” button
 Every programme has an automatically allocated 
maximum spin speed.
 Press the button  until you have reached the 
requested spin speed indicated in the display.If the spin speed “0
” is selected, the final spin is 
cancelled, but not the intermediate spins. The 
programme ends with a drain cycle.
The “Start Delay” button   allows the user to run 
the appliance at his convenience, for example at 
night when electricity is cheaper.
 Select programme, temperature and options.
 Press the “Start Delay ” button several times to 
select the delay time by 1 to 24 hours (selected 
delay is indicated in display);
Press the “Start/Pause”
 button. The indicator 
light of the “Start/Pause”
 button lights up, the 
lamp of the “Start Delay ” button flashes and the 
selected delay is indicated in the display.
 The time delay indication disappears when the 
programme starts and is replaced by the 
remaining time.
 The number of hours preselected can be reduced 
later by pressing the “Start Delay ” button again.
To cancel the pre-selected “Start Delay ”
 Turn the programme selector to the “ ” 
position.
 Reselect the desired programme and options 
and press the “Start/Pause”
 button.
Open the tap and press the “Start/Pause”
 button. 
The indicator light of the “Start/Pause”
 button lights 
up. At programme start the sequences reached by the 
programme are indicated in the display.
Note
:  If theres a power cut during the cycle, the 
programme will continue automatically from where 
it was interrupted.For safety reasons, the lid is locked during certain 
phases of the cycle. At the end of the cycle or 
during an interruption, the lid unlocks automatically 
after about 1 minute.
 Upon programme end “ ” is shown in 
the display.
1. Turn the programme selector to the “ ” position.
2. Close the tap.
3.
Open the lid and the door flaps and unload the 
appliance.
Press “Start/Pause”
 button. Select new programme 
and/or new options, temperature and spin speed and 
press “Start/Pause”
 button again. The new 
programme will continue at the same position where 
the previous programme was interrupted. Do not add 
detergent for this programme.
Note: 
 The “Start Delay” and “Prewash” cannot be 
selected after a programme change.
If, for adding some forgotten pieces of clothing or any 
other reasons, you wish to interrupt or pause the 
programme for a certain time and continue it later:
1. Press the “Start/Pause”
 button. 
The light flashes.
2. After the desired pause, press again on the 
“Start/Pause”
 button.
To cancel a programme please press Reset 
button 
for 3 seconds.
Note:
 After power cuts or disconnection from the 
mains after programme end, the LCD display may 
show the previously selected settings. In this case 
we suggest to check laundry’s humidity in drum. 
If laundry is damp, the cycle finished properly. 
Unload the drum and press Reset Button
 for 
3 seconds before selecting a new cycle for 
next laundry.
START DELAYPROGRAMME START
LID LOCKEND OF WASH CYCLECHANGE THE PROGRAMME OR OPTIONS 
DURING THE CYCLEPAUSE/INTERRUPT A PROGRAMMECANCEL PROGRAMME