Whirlpool Awe 9630 Programme Chart Manual

							Whirlpool is a registered trademark of Whirlpool USA.i:	 optional	/	Yes	:	dosing	required1)	 For	improved	garment	care,	spin	speed	is	restricted	in	these	programmes.The	wool 	and 	handwash 	cycles 	of 	this 	machine 	have 	been 	tested 	and 	approved 	by 	The 	Woolmark 	Company 	for 	the	washing 	of 	Woolmark 	garments 	labelled 	as 	“machine 	wash” 	or 	“hand 	wash”provided 	that 	the 	garments 	are 	washed	according 	to 	the 	instructions 	on 	the 	garment 	label 	and 	those 	issued 	in 	this 	programme 	chart. 															M0703
GB
5019 312 10804
ProgrammeTempe-ratureCareLabels
Max.Load
kg
Type	of	wash	/	Notes
- Respect the manufacturer's recommendations on the care label
Detergents 	and 	additivesOptionsStartdelaySpinPre-	washMain	WashSoftenerPre-washEcoIntensiverinseRinseholdClean+SpinMaxspinspeedrpm
Mixed20 - 60°C3.0Slightly to normally soiled robust laundry made of cotton, linen, artificial fibres and their blends. Effective	one-hour	programme.	Make	sure	to	wash	only	similar	colours	together	in	one	wash	load.	If	soil	level	requires,	add	oxygen-based	stain	removers.–Yesi––ii–iimax.
Fabrics
Cotton20 - 95°C6.0Normally to heavily soiled towels, underwear, table and bed linen etc. made of cotton and linen.iYesiiiiiiiimax.
Synthetics20 - 60°C3.0Normally soiled blouses, shirts, overalls, etc. made of polyester (Diolen, T revira), polyamide (Perlon, Nylon) or blends with cotton.iYesiiiiiiiimax.
Delicates20 - 40°C1.5Curtains and delicate clothing, dresses, skirts, shirts and blouses.iYesii––i–ii1000	1)
Wool / Handwash20 - 40°C1.0Woolens, labelled with the Woolmark and identified as machine washable, as well as textiles made of silk, linen, wool and viscose marked as handwashableThis	programme	is	tested	and	approved	by	The	Woolmark	Company	for	machine-	and	handwashable	wool.	Select	spin	speed	according	to	the	manufacturer‘s	recommendation	on	the	care	label–Yesi–––i–ii1000	1)
Jeans20 - 60°C5.0Normally soiled cotton jeanswear and garments made of jeanslike material such as trousers and jackets.iYesii––iiiimax.
Colours
White20 - 60°C6.0Normally to heavily soiled and robust cotton laundry.Save	energy	by	selecting	a	lower	wash	temperature	and	adding	an	oxygen-based	bleach	product,	in	addition	to	your	detergent–Yesi––ii–iimax.
Light colours20 - 60°C4.0White and pastel shaded garments made of delicate fabrics.Gentle	wash	programme	to	avoid	graying	or	yellowing	of	your	laundry.	Use	heavy	duty	detergent,	if	necessary	also	stain	removers	or	bleaches	on	oxygen	basis.	Do	not	use	liquid	detergent.iYesii––i–ii1000	1)
Dark20 - 60°C4.0Black and dark garments made of cotton, cotton blends and polyester.Special	programme	to	reduce	colour	fading	and	local	discolouration.	Prefer	to	use	a	liquid	detergent	for	dark	garments	with	this	programme.iYesii–ii–iimax.
Economy
Super Silent20 - 60°C6.0Normally to hevily soiled and robust bed linen, table linen and underwear , towels, shirtsetc. made of cotton and/or linen.This	program	is	optimised	to	allow	a	silent	washing	by	prolonged	washing	duration	and	silent	spinning.	To	avoid	noise	of	spinning	at	night,	set	spin	speed	to	„0“	and	start	spin	programme	in	the	morning,	or	define	programme	start	with	„Start	delay “	accordingly.–Yesi––ii–ii1000	1)
AquaEco20 - 40°C2.5Lightly soiled laundry made of synthetic fibres, or synthetics mixed with cotton garments. Saving	programme	with	a	very	low	water	consumption.	Use	liquid	detergent	and	the	lowest	recommended	amount	for	3kg	laundry.	Do	not	use	softener.–Yes––––i–iimax.
Speed 15´20 - 30°C3.0Briefly worn clothing made of cotton, artificial fibers and blends with cotton.Refresh	programme.	Use	lowest	recommended	detergent	amount.–Yesi–––i–iimax.
EcoCotton60°C6.0Heavily soiled and robust laundry washable at 60°C such as bed linen, table linen towels etc..The	extended	programme	duration	enables	economic	energy	and	water	consumption	while	maintaining	good	washing	results.–Yesi––ii–iimax.
Rinse & Spin--6.0Rinse and intensive spin programme.Same	as	the	last	rinse	and	the	final	spin	in	the	“Cotton”	programme.––i––ii–iimax.
A. Programme selectorB. Option buttonsC. “Temperature” buttonD. “Start delay ” buttonE “Spin” buttonF. “Start/Pause” buttonG. “Reset/Drain” buttonH. DisplayI. “Favourite” buttonJ. Programme sequence indicator
K. “Lid open” indicationL. “Child lock” indicationYour washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:M. “Water tap closed” indicationN. “Clean pump” indicationO. “Service” indication
PROGRAMME CHART
A
H
ED
F
B
C
I
G
JKL
B
M
NO
Acustic noise level :	 Washing 	- 		 	 	 51	dB(A) 	/ 	1pW	 Spinning 	- 		 	 1200, 	rpm, 	75 	dB(A) 	/ 	1pW
 
						

							5019 312 10804
ProgrammeTemperature(°C)Load(kg)Water(l)Energy(kWh)ApproxProgrammeDuration*(hours	:	minutes)
Mixed403.0450.431:00White406.0550.652:45Light	colours404.0670.501:20Dark404.0440.531:45Cotton956.059**1.852:00Cotton606.0551.022:30Cotton406.0550.602:30Synthetics603.054**0.851:40Synthetics403.0500.501:25Delicates401.5500.550:45Wool/Handwash401.0400.550:35Jeans405.0700.652:43Super	Silent606.0550.784:00AquaEco402.5190.431:00Speed	15´303.0300.150:15EcoCotton		***606.0550.903:30
CONSUMPTION DATA
Whirlpool is a registered trademark of Whirlpool USA.
Add	detergent	as	indicated	on	the	front	page	and	as	described	in	the	chapter	“Detergent	and	Additives”	in	your	Instructions	for	Use.1.	 Turn	the	programme	selector	to	the	desired	 programme.The	light 	of 	the 	“Start (Pause)”	button 			 blinks.2.	 The	temperature	and	spin speed	indicated	on	the	 display	can	be	altered	by	pressing	the	“Temperature”	 button	or	the	“Spin”	button.	
Consumption 	values 	were 	measured 	in 	normalized 	conditions 	in 	compliance 	with 	standard 	IEC/EN 	60 	456. 	Consumption 	data 	in 	the 	home	may 	vary 	with 	respect 	to 	the 	values 	in 	the 	table 	in 	relation 	to 	the 	water 	supply 	pressure 	and 	temperature, 	the 	load 	and 	the 	type 	of 	wash.*	 The	remaining	time	indicator	can	deviate	from	the	values	in	the	table,	because	it	takes	into	account	the	household	conditions	 applicable	at	that	time.**	 To 	reduce 	the 	water 	temperature, 	some 	cold 	water 	is 	added 	at 	the 	end 	of 	the 	main 	wash 	cycle,before 	the 	pump 	drains 	the 	water 	out.***	 Reference	Programme	for	Energy	Label.
ADD DETERGENTS, CLOSE THE LID AND SELECT THE PROGRAMME
“LID OPEN” INDICATION
Before	starting	and	after	end	of	a	programme,	the	symbol	appears	on	the	display	to	show	that	the	lid	can	be	opened.	As	long	as	a	wash	programme	is	running,	the	lid	remains	locked	and	must	on	no	account	be	forced	open.	In	case	you	have	an	urgent	need	to	open	it	during	a	running	programme,	refer	to	“Reset	a	running	programme	before	the	end”.
RED INDICATIONS ON THE DISPLAY
“Water tap closed”The	appliance	has	no	or	insufficient	water	supply.	Open	the	water	tap:	if	the	indications	still	lights	up,	refer	to	the	“Troubleshooting	Guide”	in	the	Instructions	for	Use.
“Clean pump”Waste	water	is	not	pumped	out.	Check	whether	the	drain	hose	is	kinked	or	the	filter	must	be	cleaned;	in	the	latter	case	refer	to	the	Instructions	for	Use	(“Removing	the	Filter”).
“Service”Lighting	up	of	the	“Service”	indication	can	be	caused	by	a	fault	in	an	electrical	component.	Refer	to	the	“Troubleshooting	Guide”	in	your	“Instructions	for	Use”;	if	the	fault	persists,	contact	our	After	Sales	Service.
“Rinse hold” button•	 The	laundry	remains	in	the	last	rinse	water	without	 progressing	to	the	final	spin	cycle	to	avoid	creasing	 and	prevent	colours	from	changing.•	It	is	particularly	useful	if	you	want	to	postpone	 spinning	to	a	later	time,	or	if	you	want	to	drain	only.•	If	you	select	“Rinse	hold”,	do	not	leave	items	to	 soak	for	too	long.	Note:	The	programme	stops	to	“Rinse	hold”	at	the	 time	the	“Rinse	hold”	symbol							on	the	display	lights	 up.	The	light	next	to	the	“Start(Pause)”	button	 blinks.Terminate the “Rinse Hold” option:•	 Press	the	“Start(Pause)”	button;	the	programme	 will	terminate	automatically	with	the	final	spin	cycle	 for	the	present	wash	programme.•		 If	you	do	not	wish	to	spin	the	clothes,	press	and	hold			 the 	“Reset/Drain“	button 	for 	a 	few 	seconds 	to 	start 			 the	drain	programme.“Clean+” button•	 Choose	this	option	if	you	use	an	in-wash	additive	for	 stain	removal	(powder,	for	example	“Vanish”)	-	it	 will	optimize	the	additive’s	efficiency	to	get	better	 wash	performance	and	stain	removal.•	 Choose	temperature	of	30	or	40°C	and	use	with	 maximum	load.•	 Add	an	appropriate	amount	of	in-wash	additive	for	 stain	removal	(powder)	to	the	main	wash	chamber,	 together	with	your	detergent	(only	use	powder	 detergent	with	this	option).		 Respect 	the 	manufacturer’s 	dosing 	instructions.•	 Prolongs 	the 	programme 	by 	approx. 	10 	to 	15 	minutes.•	 Appropriate	for	use	of	stain	removers	and	bleaches	 on	oxygen	basis.	Chlorine or perborate bleaches  must not be used!
PROGRAMME START
Open	the	tap	and	press	the	“Start(Pause)” button.	The	blinking	light	next	to	the	“Start(Pause)”	button	becomes	constant.	The	programme	sequence	indicator	shows	the	current	programme	phase,	running	from	left	to	right	through	Wash,	Rinse,	Spin/Drain.
PROGRAMME END
•	 The	symbols	of	the	programme	sequence	indicator	 are	dark,	and	the	“Door	open”	indication	lights	up.1.	 Turn 	the 	programme 	selector 	to 	the 	“Off/O” 	position.2.	 Close	the	water	tap.3.	 Open	lid	and	drum	and	unload	the	machine.4.	 Leave	the	lid	open	to	allow	the	inside	of	the	machine			 to	dry.
CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START
1.	 Press	the	“Start(Pause)” button	to	pause	the	 programme.	The	light	blinks.2.	 Select	the	new	programme,	temperature,	any	 options	and	another	spin	speed	if	you	want.3.	 Press	the	“Start(Pause)” button	again.	The	new	 programme	continues	at	the	same	position	where	 the	previous	programme	was	interrupted.	Do	not	 add	detergent	for	this	programme.
RESET A RUNNING PROGRAMME BEFORE THE END
The	“Reset/Drain”	button		cancels	a	programme	before	the	end.•	 Press	the	“Reset/Drain”	button		for	at	least	3		 		 seconds.	The 	water	is	drained	out;	it 	may	last	a	while 			 until	you	can	open	the	lid.
SELECT ANY DESIRED OPTION
START DELAY
The	“Start	Delay ”	allows	to	run	the	machine	at	the	consumer’s	convenience,	for	example	at	night	when	electricity	is	cheaper.	Do	not	use	liquid	detergent	when	activating	the	“Start	Delay ”.•	 Select 	programme, 	temperature, 	spin 	speed 	and 	options.•	 Press	the	“Start	Delay ”	button	to	select	the	delay	 time	up	to	23	hours.•	 Press	the	“Start(Pause)”	button.	 The	countdown	of	the	delay	time	begins;	the	clock	 symbol	next	to	the	delay	time	and	the	dot	between	 hours	and	minutes	blink.•	 The	time	delay	indication	disappears	when	the	 programme	starts	and	it	is	replaced	by	the	remaining	 programme	time.•	 Once	having	pressed	the“Start(Pause)”	button,	the	 number	of	hours	preselected	can	be	reduced	by	 pressing 	and 	holding 	the 	“Start 	Delay ” 	button. 	From 			 one 	hour 	on, 	the 	delay 	time 	can 	also 	be 	reduced 	in 		 		 steps 	of 	10 	minutes.To cancel the “Start Delay ”..before you press the “Start(Pause)” button:•	 Select 	another 	programme 	or 	press 	the 	“Reset/Drain”			 button...after having pressed the “Start(Pause)” button:•	 Press	“Start (Pause)“	-	the	delay	time	disappears				 from	the	display;	press	“Start (Pause)“	again	to		 start	the	selected	programme	immediately.
LOCK BUTTONS
You	can	lock	the	buttons	of	the	control	panel	against	improper	use	(e.g.	by	children).•	 Press	the	temperature	and	spin	speed	button	 simultaneously	and	hold	them	for	at	least	3	seconds.	 The	key	symbol	on	the	display	lights	up.•	 To 	unlock 	the 	buttons 	again: 	proceed 	in 	the 	same 	way.
When	the	combination	of	programme	and	additional	option(s)	is	not	possible,	the	indication	lights	switch	off	automatically.	Unsuitable	combinations	of	options	are	deselected	automatically.“Prewash” button•	 Only	for	heavily	soiled	loads	(for	example	sand,	 granular	dirt)	sensible.	Increases	the	cycle	time	by	 approximately	15	min.•	 Do	not	use	liquid	detergent	for	the	main	wash	when	 activating	the	Prewash	option.“Eco” button•		 With	modified	temperature	profile	and	a	slightly	 prologned	washing	duration,	the	optimum	 combination	of	excellent	washingresult	and	even	 lower	energy	consumption	is	achieved.“Intensive rinse” button•	 More	water	is	added	and	rinse	cycle	is	prolonged.•	 This	option	is	particularly	suitable	for	areas	with	very	 soft	water,	washing	baby	linen	and	helping	people	 with	allergies.
SAVE YOUR FAVOURITE PROGRAMMES
If	there	is	a	programme	setting	which	you	use	frequently,	the	appliance	offers	the	possibility	to	save	one	setting	for	each	programme	so	that	it	can	be	used	again	by	just	pushing	one	button.•	 Select	the	desired	programme,	temperature,	spin	 speed	and	option(s),	push	and	hold	the	“Favourites”		 button	for	at	least	3	seconds.	 The	lamp	next	to	“Favourites”	shortly	flashes	and	 then	lights	up	-	the	programme	settings	is	saved.Next	time	you	want	to	use	your	individual	programme	settings,	select	the	programme,	push	the	“Favourites”	button	and	start	by	pushing	“Start(Pause)”.If you want to replace the saved programme setting by another one:•	 Select	the	desired	programme,	temperature,	spin	 speed	and	option(s),	push	and	hold	the	“Favourites”		 button	for	at	least	3	seconds.	 The	previously	saved	programme	setting	will	be	 replaced	by	the	new	one.
“ Spin” button•	 Every	programme	has	a	predefined	spin	speed.•		 Press	the	button	to	set	another	spin	speed.•		 If	spin	speed	“0”	is	selected,	the	final	spinning	is	 cancelled	but	intermediate	spin	peaks	remain	during	 the	rinse.	The	water	is	drained	out	only.