Whirlpool Awe 9527 Programme Chart Manual

							GB AWE 9527 PROGRAMME CHART
5019 312 10613
Whirlpool is a registered trademark of Whirlpool USA
The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company 
for the washing of Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments 
are washed according to the instructions on the garment label and those issued in this programme chart. 
M0703
❉: optional / Yes : dosing required1)
For improved garment care, spin speed is restricted in these programmes.
2)
Do not use liquid detergent when activating the “Start Delay ”.
3)
Do not use liquid detergent for the main wash when activating the “Prewash” option.
Programme
Te m p e -
rature
Care
Labels
Max 
Load
kg
Ty p e  o f  w a s h / N o t e s
- For temperature selection, respect the manufacturer’s recommendations on 
the care label
Detergents and additives
Special options
Start
delay
Spin
Pre-
wash
Main
wash
Softener
Pre-
wash
Eco
Intensive
rinse
Rinse
hold
Easy
ironing
Va r i a b l e
spin
Max
Spin
Speed
rpm
White Cotton /
Antibacterial
70 - 95 °C
5.5
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts 
etc. made of cotton and linen.
At a temperature of 80°C or more, this programme eliminates bacteria, 
ensuring sanitization of your laundry. The bacteria removal efficiency has been 
tested following a similar methodology to the NF EN 13697 standard of Nov. 
2001.
❉
Ye s
3)
❉❉❉❉ ❉ ❉
❉
2)
❉
1000
Cotton
20 - 60 °C
 
5.5
Synthetics
20 - 60 °C
 
 
2.5
Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, 
Trevira), polyamide (Perlon, Nylon) or blends with cotton.
❉
Ye s
3)
❉❉❉❉ ❉ ❉
❉
2)
❉
1000
Daily load
20 - 60 °C
 
3.0
Slightly to normally soiled textiles made of cotton and/or synthetics.
—
Ye s
❉
——❉❉ ❉
❉
2)
❉
1000
Quick wash
20 - 30 °C
3.0
Shortly worn outer clothing made of cotton, polyester, polyamide and blends 
with cotton.
—
Ye s
❉
——❉❉
—
❉
2)
❉
1000
Delicates
20 - 40 °C
 
1.5
Curtains and delicate clothing, dresses skirts, shirts and blouses.
❉
Ye s
3)
❉❉
——❉
—
❉
2)
❉
1000
Jeans
20 - 60 °C
 
5.5
Normally soiled cotton jeanswear and garments made of robust jeanslike 
material such as trousers and jackets.
❉
Ye s
3)
❉❉
——❉
—
❉
2)
❉
1000
Lingerie
20 - 40 °C
1.0
This programme is particularly suitable to treat delicate lingerie (use of a 
laundry net strongly recommended).
—
Ye s
❉
—— —❉
—
❉
2)
❉
400
1)
Wo o l
20 - 40 °C
1.0
Only woollens, labelled with the Woolmark and identified as machine washable. 
This programme (40°C) is tested and approved by The Woolmark Company for 
machine washable wool.
—
Ye s
❉
—— —❉
—
❉
2)
❉
1000
Handwash
20 - 40 °C
1.0
Textiles made of silk, linen, wool and viscose marked as “handwashable”.
This programme (40°C) is tested and approved by The Woolmark Company for 
handwashable wool.
—
Ye s
❉
—— —❉
—
❉
2)
❉
400
1)
Rinse & Spin
——
5.5
Same as the last rinse and the final spin in the “Cotton” programme.
——❉
——❉❉
—❉❉
1000
Spin
——
5.5
In this programme spinning is intensive. Same as the spin cycle in the “Cotton” 
programme.
—— — —— — — —❉❉
1000
Gentle Spin
——
1.0
In this programme spinning is gentle. Same as the spin cycle in the “Wool” 
programme.
—— — —— — — —❉❉
1000
Drain
———
Drain only - no spinning. Alternative method of terminating programme after “Rinse 
Hold”.
—— — —— — — — — — —
A. Programme selector
B. Option buttons
C. “Favourite” button
D. “Temperature” button
E. “Start delay” button
F. “Variable spin” button
G. “Start/Pause” button
H. “Reset” button 
I. Display
J. Programme sequence indication
K. “Door open” indication
L. “Buttons locked” indication
Your washing machine is equipped with 
automatic safety functions which detect 
and diagnose faults at an early stage 
and react appropriately, e.g.:
M. “Water tap closed” indication
N. “Clean pump” indication
O. “Service” indication
G AON
I
}
B
CD
E
F K
M
L
J
}
B
H
 
						

							5019 312 10613
Whirlpool is a registered trademark of Whirlpool USA
Add detergent as indicated on the front page and as 
described in the chapter “Detergent and Additives” in 
your Instructions for Use.
1. Turn the programme selector to the desired 
programme.
2. The temperature
 and spin speed
 indicated on 
the display can be altered by pressing the 
“Temperature” button   or the “Variable spin” 
button . The light next to the “Start/Pause” 
button  flashes.
When the combination of programme and additional 
option(s) is not possible, the indication lights switch off 
automatically. Unsuitable combinations of options are 
deselected automatically.
“Prewash” button
 Only for heavily soiled loads (for example sand, 
granular dirt) sensible. Increases the cycle time by 
approximately 15 min.
 Do not use liquid detergent for the main wash 
when activating the Prewash option.
“Eco” button
 With a modified temperature profile and a slightly 
prolonged washing duration, the optimum 
combination of excellent washing result and even 
lower energy consumption is achieved.
“Intensive rinse” button
 More water is added and rinse cycle is prolonged.
 This option is particularly suitable for areas with 
very soft water or for washing baby linen, and helps 
people with allergies.“Rinse hold” button
 The laundry remains in the last rinse water without 
progressing to the final spin cycle to avoid creasing 
and prevent colours from changing.
 This option is particularly recommended for the 
programmes “Synthetics”, “Daily load” and 
“Delicates”.
 It is particularly useful if you want to postpone 
spinning to a later time, or if you want to drain only.
 If you select “Rinse hold”, do not leave the laundry 
to soak for too long.
Note:
 The programme stops to “Rinse hold” at the 
time the “Rinse hold”   lights up on the display. 
The light next to the “Start/Pause”
 button   
flashes.
Terminate the “Rinse hold” option  :
Press the “Start/Pause”
 button ; the 
programme will terminate automatically with the 
final spin cycle for the present wash programme.
 If you do not wish to spin the clothes, turn the 
programme selector to “Drain”
   and press the 
“Start/Pause”
 button  to start the Drain 
programme.
“Easy ironing” button
 Can be used together with “Cotton”, “Synthetics” 
and “Daily load” programmes to make ironing 
easier.
 Increases the water quantity and the clothes are 
spun very gently.
“ Variable spin” button
 Every programme has a predefined spin speed.
 Press the button to set another spin speed.
 If spin speed “0” is selected, the final spinning is 
cancelled but intermediate spin peaks remain 
during rinse. The water is drained out only.CONSUMPTION DATA
Programme
Te m p e r a t u r e  
(°C)
Load
(kg)
Wa ter
(l)
Energy
(kWh)
Approx. Programme Duration
(hours : minutes)*
White Cotton / Antibacterial 95 5.5 55**
1.70 1:55
Cotton 60 5.5 49 1.02 2:25
Cotton with “Eco”***
60 5.5 49 0.93 2:35
Cotton 40 5.5 53 0.55 2:00
Synthetics 60 2.5 53**
0.85 1:30
Synthetics 40 2.5 47 0.50 1:15
Daily load 40 3.0 43 0.48 1:00
Quick wash 30 3.0 36 0.30 0:30
Delicates 40 1.5 51 0.50 0:45
Jeans 40 5.5 73 0.55 2:15
Lingerie 30 1.0 42 0.30 0:35
Wool 40 1.0 53 0.50 0:45
Handwash 40 1.0 43 0.50 0:35
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home 
may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of  w a s h .
*
The time indicated on the display can deviate from the values in the table, because it takes into account the household condition s 
applicable at that time.
**
To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
***
Reference Programme for Energy Label.ADD DETERGENTS, CLOSE THE LID AND 
SELECT THE PROGRAMMESELECT ANY DESIRED OPTION
If there is a programme setting which you use 
frequently, the appliance offers the possibility to save 
one setting for each programme so that it can be used 
again by just pushing one button.
 Select the desired programme, temperature, spin 
speed and option(s), push and hold the 
“Favourites”
 button   for at least 3 seconds. 
The lamp next to “Favourites”
  shortly flashes 
and then lights up - the programme setting is saved.
Next time you want to use your individual programme 
setting, select the programme, push the “Favourites”
 
button   and start by pushing “Start/Pause” 
.
If you want to replace the saved programme 
setting by another one:
 Select the desired programme, temperature, spin 
speed and options and then press and hold the 
“Favourites”
 button   for at least 3 seconds. 
The previously saved programme setting will be 
replaced by the new one.
The  “Star t De lay”   all ow s  to run the machine at the 
consumer’s convenience, for example at night when 
electricity is cheaper.
 Select programme, temperature, spin speed and 
options.
 Press the “Start Delay ” button to select the delay 
time up to 23 hours.
Press the “Start/Pause”
 button  . 
The countdown of the delay time begins; the clock 
symbol next to the delay time and the dot between 
hours and minutes flash.
 The time delay indication disappears when the 
programme starts and it is replaced by the 
remaining programme time.
 Once having pressed the “Start/Pause”
 button  , 
the number of hours preselected can be reduced by 
pressing and holding the “Start Delay ” button. From 1 
hour on, the delay time can also be reduced by minutes.
To cancel the “Start Delay ”
..before you press the “Start/Pause” button:
 Select another programme or press the “Reset”
 
button .
..after having pressed the “Start/Pause” button:
Press the “Reset”
 button   for at least 3 seconds 
- the start delay time disappears from the display.
Open the tap and press the “Start/Pause”
 
button . The light next to the “Start/Pause”
 
button  is on. The programme sequence indicator 
shows the current programme phase, running from left 
to right through Wash, Rinse, Spin/Drain.
Before starting and after end of a programme, the symbol 
lights to show that the lid can be opened. As long as a 
wash programme is running, the lid remains locked and must on no account be forced open. In case you have an 
urgent need to open it during a running programme, refer 
to “Cancel (Reset) a running programme before the end”.
You can lock the buttons of the control panel against 
improper use (e.g. by children).
 Press the temperature and the spin speed button 
simultaneously and hold them for at least 3 
seconds. The key symbol on the display lights up.
 To unlock the buttons again: proceed in the same 
way.
“Water tap closed”
The appliance has no or insufficient water supply. Open 
the water tap; if the indication still lights up, refer to the 
“Troubleshooting Guide” in the Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the 
drain hose is kinked or the filter must be cleaned; in the 
latter case refer to the Instructions for Use (“Removing 
the Filter”).
“Service”
Lighting up of the “Service” indication can be caused by 
a fault in an electrical component. Refer to the 
“Troubleshooting Guide” in your Instructions for Use; 
if the fault persists, contact our After Sales Service.
 The symbols of the programme sequence 
indicator are dark, and the “Door open” 
symbol  lights up.
1. Turn the programme selector to the “Off/O” 
position.
2. Close the water tap.
3. Open lid and drum and unload the machine.
4. Leave the lid open to allow the inside of the 
machine to dry.
1. Press the “Start/Pause”
 button   to pause the 
programme. The light flashes.
2. Select the new programme, temperature, any 
options and another spin speed if you want.
3. Press the “Start/Pause”
 button   again. The 
new programme continues at the same position 
where the previous programme was interrupted. 
Do not add detergent for this programme.
The “Reset”
 button   cancels a programme before 
the end.
Press the “Reset”
 button   for at least 3 
seconds. Any existing water is drained out before 
the lid can be opened.SAVE YOUR FAVOURITE PROGRAMMESSTART DELAYPROGRAMME START“DOOR OPEN” INDICATION
LOCK BUTTONSRED INDICATIONS ON THE DISPLAYPROGRAMME ENDCHANGE PROGRAMME AND/OR OPTIONS 
AFTER PROGRAMME STARTCANCEL (RESET) A RUNNING 
PROGRAMME BEFORE THE END