Whirlpool Awe 7526 Programme Chart Manual

							GB
5019 312 11066
ProgrammeCareLabels
Max.Load
kg
Type of wash / Notes
- for temperature selection, respect the manufacturer's recommendations on the care label
Detergents and AdditivesSpecial optionsMax.Spin Speed
rpm
Pre- washMain washSoftenerStartdelayPre-washRapidIntensiverinseRinseholdVariablespin
Cotton /Antibacterial40 - 60 - 95°C40 - 60 - 95°C6.0Normally to heavily soiled bed linen, table linen, towels and garments made of cotton and/or linen. Selecting “Cotton 95”, this programme eliminates bacteria, ensuring sanitization of your laundry. The bacteria removal efficiency has been tested following a similar methodology to the NF EN 13697 standard of Nov . 2001.iYes 1)ii 2)ii 4)iiimax.
SuperEco60°C60°C6.0
Heavily soiled and robust laundry made of cotton, synthetics and their blends. Economical energy consumption by prolonged wash duration - ideal to be run overnight to profit from more favourable energy rates. Avoid noise of spinning at night by setting the spin speed to “0” and start spin programme in the morning, or by defining programme start with “Start delay” accordingly. - For garments with a high share of synthetic fibres, we recommend to use a laundry net.
–Yesii 2)––iiimax.
Synthetics30 - 40 - 60°C30 - 40 - 60°C3.0Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon).iYes 1)ii 2)iiiiimax.
Delicates30 - 40°C30 - 40°C1.5Curtains and delicate clothing, dresses, skirts, shirts and blouses.iYes 1)ii 2)i––iimax.
Daily load40°C40°C3.0Slightly to normally soiled textiles made of cotton and/or synthetics.–Yesii 2)––iiimax.
Quick wash 15'30°C30°C3.0Refreshes briefly worn outer clothing made of cotton, artificial fibers and blends with cotton. Refresh programme. Use lowest recommended detergent amount.–Yesii 2)–––iimax.
WoolCold - 40°C        - 40°C1.0Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable.This programme (40ºC) is tested and approved by The Woolmark Company for machine washable wool.–Yesii 2)–––iimax.
Handwash40°C40°C1.0Textiles made of linen, silk, wool and viscose marked as “handwashable”.A very gentle spin is used in this programme. This programme (40ºC) is tested and approved by The Woolmark Company for handwashable wool.–Yesii 2)–––ii400 3)
Lingerie30 °C30°C1.0This cycle is particularly suitable to treat delicate lingerie (use of a laundry net strongly recommended).–Yesii 2)–––ii400 3)
Rinse & Spin–6.0Same as the last rinse and the final spin in the “Cotton” programme.––ii––iiimax.
Spin–6.0In this programme spinning is intensive. Same as the spin cycle in the “Cotton ” programme.–––i––––imax.
Drain––Drain only - no spinning. Alternative method of terminating programme after “Rinse Hold”.–––i––––––
Whirlpool is a registered trademark of Whirlpool USA.
PROGRAMME CHART
Yes = dosing required / i = optional
This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately:
H. “Service” indication
I. “Water tap closed” indication
J. “Clean pump” indication
1) Do not use liquid detergent for main wash if you  have activated prewash option.2) Do not use liquid detergent.3) For improved garment care, spin speed is restricted  to 400 rpm in this programme.4) Selectable for programmes Cotton 60 and 40°C only.
A.  Programme selectorB. “Start delay ” buttonC. Programme sequence indicator (over the line) Start delay indicator (under the line)D. “ Variable spin” buttonE. “Start/Pause” buttonF. “Reset” buttonG. “Door open” indication
Acustic noise level : Washing -        59 dB(A) / 1 pW Spinning -     1100 rpm, 74 dB(A) / 1 pW    1000, 900 rpm, 76 dB(A) / 1 pW    800, 700 rpm, 72 dB(A) / 1 pW
A
B
H
F
E
G
C
D
J
I
The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of Woolmark garments labelled as “machine wash” or “hand wash”provided that the garments are washed according to the instructions on the garment label and those issued in this programme chart.M0804
 
						

							5019 312 11066
“Rinse hold” button• The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing.• This option is particularly recommended for the “Synthetics”, “Daily load” and “Delicates” programmes.• It is useful if you want to postpone spinning to a later time, or if you want to drain out only.• If you select “Rinse hold”, do not leave items to soak for too long.• As soon as the appliance stops in the rinse hold, the “Anticrease” lamp of the sequence indicator lights up and the lamp next to the “Start/Pause” button flashes.Terminate the “Rinse hold” option:•  Press the “Start/Pause” button; the programme will terminate automatically with the final spin cycle for the present wash programme.• If you do not wish to spin the clothes, turn the programme selector knob to the “Drain” programme and press the “Start/Pause” button.
“ Variable spin” button• Every programme has a predefined spin speed.• Press the button to set another spin speed.• If spin speed “0” is selected, the final spinning is cancelled but intermediate spin peaks remain during the rinse. The water is drained out only.
Whirlpool is a registered trademark of Whirlpool USA.
SELECT THE DESIRED OPTION(S)
Selecting or deselecting an option can be done at any time during the programme. The option will be applied as long as the corresponding programme phase has not been executed yet.
“Prewash” button• Only for heavily soiled loads (for example sand, granular dirt). Increases the cycle time by approximately 20 min.
“Rapid” button•   Enables quicker washing by shortening the programme duration.• Recommendable for small loads or only lightly soiled laundry.
“Intensive rinse” button• The amount of water is increased to ensure a more intensive rinse.• This option is particularly suitable for areas with very soft water, washing baby linen and people with skin allergies.
START DELAY
The “Start delay ” allows to the user to run the machine at his convenience, for example at night when electricity is cheaper.• Select programme, spin speed and options.• Press the “Start Delay ” button several times to select a delay time of 1, 3, 6, 9 or 12 hours. The corresponding indicator lamp lights up.• Start the programme (see “Progremme Start”). The indication next to the “Start delay ” button lights up and goes off when the programme starts.• Once having pressed the “Start/Pause” button, the countdown of the time delay begins. When the programme starts, the start delay indicator light goes off and is replaced by the programme sequence indication.• After the “Start/Pause” button has been pressed, the number of hours preselected can be reduced by pressing again the “Start delay ” button.To cancel the “Start delay ”..before you press the “Start/Pause” button:• Turn the programme selector to another position  or press the “Reset” button...after having pressed the “Start/Pause” button:• Press the “Reset” button for at least 3 second. The  Start delay indicator light goes off.
CONSUMPTION DATAFAILURE INDICATIONS
In a case of any failures of irregularities, consult the “Troubelshooting Guide” in Instruction for Use.“Service”Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your “Instructions for Use”; if the fault persists, contact our After Sales Service.“Water tap closed”The appliance has no or insufficient water supply. Open the water tap: if the indications still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.“Clean pump”Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned: in the latter case refer to the Instructions for Use (“Removing the Filter”).
PROGRAMME END
• All the lights of the programme sequence indicator  are off, and the “Door open” indication lights up.1. Turn the programme selector to the “Off/O” position.2. Close the water tap.3. Open lid and drum and unload the machine.4. Leave the lid open for some time to allow the interior of the machine to dry.
CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START
1. Press the “Start/Pause” button to pause the programme. The light flashes.2. Select the new programme, any options and another spin speed if you want.3. Press the “Start/Pause” button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.
CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END
The “Reset” button cancels a programme before the end. Press the “Reset” button for at least 3 seconds. Any existing water is drained out before the door can be opened.
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the lamp lights to show the the lid can be opened. As long as a wash programme is running, the lid remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.
PROGRAMME START
Open the tap and press the “Start/Pause” button. The indication lamp next to the “Start/Pause” button lights up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain. When the programme phrase is finised, the corresponding indication goes out.• Note: If there is a power interruption or if the appliance is disconnected during the cycle, the programme will run again from the point where it was interrupted.
ProgrammeTemperature
(°C)
Load
(kg)
Water
(l)
Energywithout “Rapid”(kWh)
Approx. programme duration      (hrs : min)
without “Rapid”with “Rapid”
Cotton / Antibacterial956.053*1.912:05–Cotton**606.0481.024:002:30Cotton**603.0350.762:10***Cotton406.0480.652:502:00Cotton**403.0350.572:00***Synthetics603.050*0.902:051:14Synthetics403.0400.501:500:59Delicates401.5500.550:45–Daily load403.0400.451:00–Speed 15´303.0300.150:15–Wool401.0550.550:45–Handwash401.0400.550:35–Lingerie401.0400.400:31–SuperEco606.0550.784:00–
1. Load the machine, close the drum doors and check that they are properly locked.2. Add detergent and eventual additives as described on    the front page and in your Instructions for Use.3. Close the lid.4. Turn the programme selector to the desired programme and temperature. The lamp next to the “Start(Pause)” button blinks.
PREPARATION OF THE WASH CYCLE
Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.W ater and energy consumption refer to the default setting of the programmes; selecting special options or modifying spin speed or temperature will change the consumption data. The programme duration may differ from the values indicated above as it depends on the operation c onditions applicable at that time (see also “Troubleshooting Guide” in your Instructions for Use).*  To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.**  Reference Programmes for Energy Label.*** Automatic adaption of programme duration after detection of wash load.