Whirlpool Adp 6993 Eco Quick Reference Guide

GB -1-
w
Chart
START/RESUME BUTTON
Push this button to start the selected program: the 
indicator lights up and goes off at the end of the 
program. 
When the door is opened during a washing cycle, 
the cycle is temporarily paused: the Start indicator 
blinks. To resume the cycle close the door and 
push Start button again.CANCEL/OFF BUTTON
Push this button to switch off the control panel.
If pressed when a program is running it cancels the 
program ongoing draining water for 1 minute (0:01 is shown into...

GB -2-
First time use
1- salt reservoir
2- rinse aid dispenser
3- detergent dispenser
4- racks system
5,6,7,8- available functions on the panel
9- filters
10- spray arms
Water hardness should be set only 
before the first wash or if water 
hardness has been changed
1
Visual indicator 
(depending 
on the model).
Unscrew cap.
Fill the salt reservoir with water 
before the first wash only.
(depending on the model)
The salt level indicator lamp may remain lit 
at the end of several wash cycles. If the 
water...

GB -3-
Daily check
3
Check the rinse aid indicator to check the level 
into the dispenser.
(depending on the model)
Rinse aid indicator on the control panelRinse aid indicator on the dispenser
The indicator lamp lights up when RINSE AID NEEDS 
TO BE ADDED.dark: OK.clear: NEEDS TO BE ADDED
Only use rinse aids recommended for use in domestic dishwashers. Immediately wipe away any rinse aid spilt accidentally. This prevents the formation of excess suds which can cause a fault function of the 
appliance.
If...

GB -4-
How to load the racks
E - OPEN
(depending on the model)
F - Foldable plate holders: They can be folded down to load pots
or
G - Fixed plate holders
H - Cutlery basket (or I model)
J - Grid: Helps to keep the cutlery separate for better washing results.
H
How to load LOWER RACK
4
A - Glass-holder for long stem glasses: it can be 
adjusted in 2 different positions according glasses shape.
B - Adjustable flaps: in horizontal position for cups/
long utensils, in raised position for plates.(in some...

GB -5-
Switching off the appliance. Everything o.k. ...
Wash cycle
Select program
6
7
8
Exercise caution when opening the door: beware of hot steam.
Press the CANCEL/Off button once to turn the appliance into Standby mode.
All the indicator lamps switch off. Unload the appliance, starting from the lower rack in order to avoid any residual drips of water falling onto crockery below.
Maintenance and careMaintenance and care
Overview of programs
The max. possible number of programs is illustrated in the...

GB -6-
What to do if...
If a fault occurs, before contacting the After-sales Service, make the following checks to try and remedy the problem.
Most faults can be remedied by taking the following courses of action, quickly restoring normal appliance operation.
How the faults are shown on the display: Function number “F”x - blinkingError number “E”y - blinking 0.5 sec. pause
The appliance... Possible causes... Solutions...
...is not working/will not start- The appliance must be switched on.- Check the...

GB -7-
What to do if...
Crockery and cutlery... Possible causes... Solutions...
...salt indicator lit- Use tablets for soft water.- Set “Tablet” option; if this option is not available, it is normal for the salt indicator to light up.
...have deposits: regeneration salt residue- Water too hard. - In areas with very hard water, more regeneration salt needs to be added (see page 2, “How to set water 
hardness”).
- Salt reservoir cap open. - Close the salt reservoir cap properly.
- Not enough rinse aid. -...

GB -8-
What to do if...
If, after carrying out the above checks, the fault persists, disconnect the mains plug and turn off the water tap. Contact the After-sales Service (see warranty).
Before contacting our After-Sales Service, take note of the following:
- the description of the fault,
- the appliance type and model,
- the service code (the number indicated on the adhesive rating plate) inside the door on the right-hand side:
Precautions and general recommendations
1. Packing
The packaging materials...