Home > Whirlpool > Dishwasher > Whirlpool Adg 8930 Ix Quick Reference Guide

Whirlpool Adg 8930 Ix Quick Reference Guide

Here you can view all the pages of manual Whirlpool Adg 8930 Ix Quick Reference Guide. The Whirlpool manuals for Dishwasher are available online for free. You can easily download all the documents as PDF.

Page 1

GB 
-1-
Chart
START
DELAY
optionMULTI
ZONE
option POWER
CLEAN
optionON/OFF
BUTTON PROGRAMME
SELECTION
BUTTON
(see “Table of 
programmes” 
below).START BUTTON
The indicator lights up during operation, flashes when a fault occurs, 
and goes off at the end of the programme.
START BUTTON RESET FUNCTION:
Press this button for at least 2 seconds; the selected programme and options will be 
cancelled. Main failure displays (repeated flashing of the START indicator lamp) can be 
cancelled by RESETTING. Detailed...

Page 2

GB 
-2-
First time use
1- salt reservoir
2- rinse aid dispenser
3- detergent dispenser
4- racks system
5,6,7,8- available functions on the panel
9- filters
10- spray armsIn order to always ensure the best cleaning 
results, you NEED to set: 
DETERGENT type and WATER HARDNESS.
1.
Select 3rd programme 
(see Table of programmes 
- page 1)
2.
Press START button 
for 7 seconds
3a.
Check your 
detergent type...
3b.
...and set it on your dishwasher 
using the START button
(as per table below)
4.
Remember to use...

Page 3

GB 
-3-
Daily check
 ELS
SEL
ELS
ELS
12
3Adding rinse aid (not necessary when you use tablets). How to adjust the rinse aid dosage regulator
Daily use
The salt level indicator lamp may remain lit for the duration of several wash cycles. If the 
water hardness level falls within category (soft), no 
salt is required.
Salt indicator 
(depending on 
the model)
The indicator lamp on the control panel lights 
up when SALT NEEDS TO BE ADDED.
orange: OK.
clear: NEEDS TO BE ADDED
Rinse aid indicator (depending...

Page 4

GB 
-4-
A - Two trays for
cutlery
(In some models only)
B - Adjustable glass holder
How to adjust upper 
rack height
 (if available) 
- It could be useful to lift 
up upper rack to have 
more space in lower 
rack or bring it down to 
load long stem glasses.
- Grasp and take out the 
two lateral handles (C
) 
must be on same level
 
and lift up or take down 
the upper rack.
How to remove cutlery rack and/or upper rack 
(if available) 
- It could be useful to remove cutlery rack to 
load stem glasses in...

Page 5

GB 
-5-
Rectifying minor faults yourself ...Switch off the appliance Everything o.k. ...Wash cycleSelect programmeQuick, permanent or alternating109 6
7
8
Overview of programmes
The max. possible number of programmes is illustrated in the chapter “Chart”. The corresponding programmes for your appliance can be found on the panel (page 1).
Choose programme according to the attached table of programmes (page 1).Duration of the programme depends on the external conditions in the apartment, temperature and...

Page 6

GB 
-6-
What to do if...
If a fault occurs, before contacting
 the After-sales Service, make the following checks to try and remedy the problem. Most faults can be remedied by taking the following courses of action, 
quickly restoring normal appliance operation.
The appliance... Possible causes... Solutions...
...is not working/will not start
- The appliance must be switched on.
- Check the household circuit fuse if there is no power supply.
- The dishwasher door doesnt close.
- Check if the dishwasher’s...

Page 7

GB 
-7-
What to do if...
Crockery and cutlery... Possible causes... Solutions...
...salt indicator lit
- Use tablets for soft water.
- Set “Detergent type” option; if this option is not available, it is normal for the salt indicator to light up.
...have deposits: regeneration salt residue
- Water too hard.- In areas with very hard water, more regeneration salt needs to be added (see page 2 “How to set water 
hardness”).
- Salt reservoir cap open. - Close the salt reservoir cap properly.
- Not enough...

Page 8

GB 
-8-
What to do if...
If, after carrying out the above checks, the fault persists, disconnect the mains plug and turn off the water tap.
Contact the After-sales Service (see warranty).
Before contacting our After-Sales Service, take note of the following:
- the description of the fault,
- the appliance type and model,
- the service code (the number indicated on the adhesive rating plate) inside the door on the right-hand side:Precautions and general recommendations1. Packing
The packaging materials...
Start reading Whirlpool Adg 8930 Ix Quick Reference Guide

Related Manuals for Whirlpool Adg 8930 Ix Quick Reference Guide

All Whirlpool manuals