Whirlpool Adg 7665 1 Instructions For Use
Here you can view all the pages of manual Whirlpool Adg 7665 1 Instructions For Use. The Whirlpool manuals for Dishwasher are available online for free. You can easily download all the documents as PDF.
Page 1
59 INSTRUCTIONS FOR USE BEFORE USING THE DISHWASHER/ CONNECTIONS ELECTRICAL CONNECTION PRECAUTIONS AND GENERAL RECOMMENDATIONS HOW TO FILL THE SALT CONTAINER HOW TO FILL THE RINSE AID DISPENSER HOW TO FILL THE DETERGENT DISPENSER CARE AND MAINTENANCE
Page 2
60 BEFORE USING THE DISHWASHER/ CONNECTIONS 1. Removing the packaging and controls: After unpacking, make sure that the dishwasher is undamaged and that the door closes correctly. If in doubt, contact a qualified technician or your local retailer. •Keep the packaging materials (plastic bags, polystyrene parts, etc.) out of reach of children, as they are potentially dangerous. This dishwasher has been factory tested to ensure it functions correctly. Such testing may leave slight water marks that...
Page 3
61 ELECTRICAL CONNECTION 1) For Great Britain only Warning - this appliance must be earthed Fuse replacement If the mains lead of this appliance is fitted with a BS 1363A 13amp fused plug, to change a fuse in this type of plug use an A.S.T.A. approved fuse to BS 1362 type and proceed as follows: 1.Remove the fuse cover ( A) and fuse ( B). 2.Fit replacement 13A fuse into fuse cover. 3.Refit both into plug. Important: The fuse cover must be refitted when changing a fuse and if the fuse cover is lost the...
Page 4
62 PRECAUTIONS AND GENERAL RECOMMENDATIONS 1. Packing: The packing box may be fully recycled as confirmed by the recycling symbol . 2. Energy and water saving tips: Do not rinse crockery under running water. Always fully load the dishwasher before switching on or set the wash programme to half load/ Multizone (if available) if one rack only is loaded. If ecological energy sources are available such as solar panel heating, heat pumps or centralised heating systems, the appliance may be connected...
Page 5
63 HOW TO FILL THE SALT CONTAINER From a water hardness category of 1–2 (medium), before using the dishwasher, fill the salt container with regeneration salt (to find out the hardness level of water in your area, contact your local Water Board or check the last bill you received). If the water hardness level does not correspond to position 3 (factory setting) or if the water hardness level changes: Set the water hardness level (for dishwashers without water hardness sensor only): Setting must be...
Page 6
64 HOW TO FILL THE RINSE AID DISPENSER (Not necessary when using a combined action detergent) The rinse aid facilitates drying and prevents the formation of unsightly spots and streaks on crockery. Before using the dishwasher for the first time, fill the rinse aid dispenser. Only use rinse aids recommended for use in domestic dishwashers. 1.Press button A to open the cover (see drawing). 2.Fill the dispenser with rinse aid up to the dotted line (about 100 ml maximum). Immediately wipe away any...
Page 7
65 HOW TO FILL THE DETERGENT DISPENSER Only use detergents recommended for use in domestic dishwashers. Only fill the detergent dispenser prior to starting a wash programme (see the Quick Reference Guide). 1.Press button C to open the cover. 2. How to fill the detergent dispenser. Programmes with pre-rinse: -Powder and/or liquid detergent: pour two thirds of the recommended dosage into the compartment ( A); pour one third into the compartment ( B). -Tablets: place a tablet in the compartment (...
Page 8
66 CARE AND MAINTENANCE Before cleaning or carrying out maintenance, switch off the appliance, disconnect the mains plug and turn off the water tap. Cleaning the outside of the appliance: To clean the outside of the appliance, use a neutral detergent and a damp cloth. Clean the control panel with a damp cloth only. Do not use abrasive detergents. Cleaning the inside of the dishwasher: Regularly wipe the door seal and inside of the door with a damp cloth to remove any food residue. Upper spray arm:...
Page 9
67 CARE AND MAINTENANCE Cleaning the filters 1.Rotate the microfilter counter-clockwise (in the direction of the arrow “0”) and extract it ( E). 2.Remove the wide-mesh filter ( F). 3.Remove the fine-mesh filter ( G). 4.Clean all filters under running water, paying attention not to bend the fine-mesh filter. Check that no impurities are left inside the dishwasher! 5.To reassemble: insert the wide-mesh filter into the microfilter so it clicks into place. Insert the fine-mesh filter. The filter must...