Whirlpool Adg 455 Ix Instruction Manual

							9 For best performance of the dishwasher, follow these loading guidelines. Features and
appearance of baskets and cutlery baskets may vary from your model.
Attention before or after Loading the Dishwasher Baskets
Scrape off any large amounts of leftover food. Soften remnants of burnt food in pans.
It is not necessary to rinse the dishes under running water.
Place objects in the dishwasher in following way:
1.Items such as cups, glasses, pots/pans, etc. are faced downwards.
2.Curved items, or ones with recesses, should be loaded aslant so that water can run off.
3.All utensils are stacked securely and can not tip over.
4.All utensils are placed in the way tha t the spray arms can rotate freely during washing.
Very small items should not be washed in the dishwasher as they could easily fall ou t of the baskets.
Upper wheels
Lower wheels
Adjusting the Upper Basket
The height of the upper basket can be adjusted in order to create more space for large utensils
both for the upper/lower basket. The height of the upper basket can be adjusted by placing the
wheels on different height of the rails. Long items, serving cutlery, salad servers and knives
should be placed on the shelf so that they do not o bstruct the rotation of the spray arms.
The shelf can be fold ed back or be removed when not required for use.
Bowl M Bowl L() ()
GlassesDessert plateSaucers
Cups
Front(Eg g)
Gravy la dle
Loading the Upper Rack
Th e upper ra ck is de s igned to ho ld mo re d elicate a nd lighter dis hwa re s uch as g lass es, coffee
and tea cup and saucers, as well as plates, small bowls and shallow pans (as long as they are
not too dirty).
Position the dishes and cookware so that they do not get moved by the spray of water.
 
						

							Loading the Lower Basket
We recommend that you place large items which are most difficult to clean into the lower basket:
pots, pans, lids, serving dishes and bowls, as shown in the figure to the right.
It is preferable to place serving dishes and lids on the side of the racks in order to avoid blocking
therotationofthe topsprayarm.
Pots, serving bowls, etc. must always be placed top down.
Deep pots should be slanted to allow water to flow out.
The bottom basket feature fold down tine rows so that larger or more pots and pans can be lo aded .
1. Cutlery basket
2. Dessert plates
3. Soup plates
4. Dinner plates
5. Oval platter
6. Saucer
10
 
						

							11
Cutlery Basket
For washing in th e dishwashe r the following cutlery/dishes
Cutlery with wooden, horn china or
mother-of-pearl handles
Plastic items that are not heat resistant
Older cutlery with glued parts that are not
temperature resistant
Bonded cutlery items or dishes
Pewter or cooper items
Crystal glass
Steel items subject to rusting
Wooden platters
Items made from synthetic fibres
Do not put in items that are dirty of cigarette ash, c andle wax, lacquer or paint.
If you buy new dishes please make sure that they are suitable for dishwashers.Some types of glasses can become
dull after a large number of washes
Silv er a nd alum inum par ts h ave a
tendenc y to discolour du ring washin g
Gla zed patt erns may fade if machine
washed freq uen tly
P lea se d o no t ove rloa d y our d ishw ash er. T here is o nly spac e fo r 9 s tand ard dishe s. Do n ot
use dish that is no t suitable for dishwa shers. This is important for good resu lts and for
reasonable energy consume.
Before loading the dishes, you should:
Remove large left-over
Softe n re mnants of burnt food in pans
Dishes and cutlery must not impede the rotation of the spray arms
Load hollow items such as cup s, glass es, pans etc. with the opening downwards so that
water cannot collect in the con tain er or a deep base
NOTE:
NOTE:
Are not suitable
Are of limited suitability
Loading cutlery and dishes
When loading the dishes and cutlery, please note:
Cutlery should be placed in the cutlery basket with the handles at the bottom. If the rack has side baskets, the
spoons should be loaded separately into the appropriate slots, especially long utensils should be placed in the
horizontal position at the fron t of the uppe r basket as s hown in the picture.
Always load sharp utensils with the sharp
point down!
1 2 3456 7
3553
1551
3553
3553
1561
3213
3244
1244
2244
2214
1214
7274
1.Tea spoons
2.Dessert spoons
3.Soup spoons
4.Forks
5.Knives
6.Serving forks
7.Serving spoons
Do not leave any item extend thro ugh bottom.
Knives and other utensils with sharp points
must be loaded in th e basket with their points
down or placed in an horizontal posit ion.
It is dangerous to open the door when washing, because the hot water may be scalded to you.
 
						

							Wash Cycle Table
12
Meaning: need to fill rinse into the Rinse-Aid Dispenser.()
*En50242: This program is the test cycle, the rinse-aid dispenser
setting is recommended to be set to position 6.
Daily
Int ensiv e
EN 50242
5/22g
Fo r normally soiled loads,
such as , plates,glasses
and lightly soiled pans.
Standard daily cycle.pots
For the heaviest soiled loads,
such as pots, pans, casserole
dishes and dishes that have
been sitting with dried food
on them for a while.
A shorter wash for lightly
soiled loads that do not
need drying.
Pre -wash
Pr e- w ash 5 0
-wash
Wa sh ( 60 )
Rinse
Rinse (70 )
Drying（）
℃
℃℃
Pr e
Rinse
Pre-wash
Wa sh (50 )
Rinse (60 )
Drying℃
℃
Wash (40 )
Rinse (45 )℃
℃
171
0.81
1731.4
28
0.35
18.4
13.0
Eco.
22gFor lightly soiled loads,such
as plates,glasses,bowls and
ligh tly so iled pans.Pre -w ash
Wash (45 )
Rinse (60 )
Drying℃
℃11 1
0.7
11 . 0
7.0
5/22g
To rinse dishes that you
plan to wash later that day.Pre-w ash11
0.016.0
Express
15g 15g
Daily
Eco.
Int ensiv e
3in1 3in1
For normally soiled loads,
such as , plates, glasses
and lightly soiled pans.
standard daily cycle.po ts
For lightly soiled loads,such
as plates,glasses,bowls and
lightly soiled pans. F or the h eaviest soil ed loa ds ,
such as pots, pans, casserole
dishes and dishes that have
been sitting with dried food
on them for a while.Pre-wash 60
Wash (70 )
Rinse
Rinse
Rinse (70 )
Drying
（℃）
℃
℃
Pre-wash
Wash (50 )
Rinse (70 )
Drying℃
℃
Pre-wash
Wa s h (4 5 )
Rinse (70 )
Drying℃
℃
148
1.0
128 0 .8
161
1.515. 1
12.7
12.7
3in1
3in1
3in1
3in 1+
+
+
+
+
+
 
						

							WARNING!It is dan gero us to ope n the do or when was hing , because the hot wate r ma y s cald you. Whe n the wo rking cyc le h as fi nish ed, the buzz er of the dishwas her will soun d fo r 8 s ec onds, the n sto p. Turn off
the appliance using the ON/OFF button, shut off the water supp ly and open the door of the dishwasher.
Wait for a few minutes before unlo ading th e dishwasher to avoid ha ndlin g the dishes and utensils while they
are still hot and more susceptible to break age. The y will also dry better.
Switch Off the Dishwasher
The program has ended, only if there appears a 0 in the digital display (remaining program time).
1.Switch off the dishwasher by pressing the ON/OFF button.
2.Turn off the water tap!
Open the door carefully.
Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down around 15 minutes
before removing from the appliance.
Open the dishwashers door, leave it ajar and wait a few minutes before removing the dishes. In this way they
will be cooler and the drying will be improved.
Unloading the dishwasher
It is normal that the dishwasher is wet inside.
Empty the lower basket first and then the upper one. This will avoid water dripping from the upper Basket onto
the dishes in the lower one.
Turning On the Appliance
Change the Program...
Forgot to Add a Dish?
will working after 10 seconds.continue
If you open the door , the machine will pause. When you close the door , the machineduring a wash cycle
AttheEndoftheWashCycle
13
Starting a cycle wash
Draw out the lower and upper baske t, load the dishes and push them back.
It iscommendedtoloadthelowerbasketfirst,then theupperone(seethe sectionentitled
Lo a ding the Dish was he r ).
Pour in the detergent (see the section entitled Salt, De tergent and Rinse Aid ).
In sert the plug into the soc ket. The power supply is 220-2 40 VAC /50 HZ, the specifica tion of the
socket is 10A 250VAC. Make sure that the water supply is turned on to full pressure.
Close the door, press the ON/OFF button, and the ON/OFF light will turn on. Press the prog ram
b utton to select a desired wash cycle, After 3 seconds, the machine will work. “”
“”
Premise:
A cycle that is underway can only be modified if it has only be en running for a short
time. Otherwise, the d etergent may have already b een released, and the a ppliance may
have alread y drained the wash water. If this is the case, the detergen t dispenser must
be refilled (see the section entitled  Loading the Detergent  ).
When you press the start/reset button more than 3 seconds, you can cancel the running
programme and select other programmes (see the section entitled  Starting a wash cycle. . .  ).
When you select Intensive/Normal/Eco.Programmes, yo u ca n select the 3in1 function.
A forgotten dish can be added at any time before the detergent cup opens.
Load the forgotten dishes.
Close the door, the dishwash er will sta rt ru nning again
after 10 seconds. After t he spray arms stop wo rking ,you can open the door
compl etely.
2
Open the door a little to stop the washing.13
4
 
						

							The filter prevents larger remnants of food or other objects from getting inside the pum.
The residues may block the filter, in this case they must be removed.
The filter system consists of a coarse filter,a flat (Main filter)
A nd a microfilt er(Fine filter ).
Food and soil particles trapped in this filter are pulverized by a
specia l jet on the lower spray arm and washed down to drain.
La rge r ite ms, such as p iece s o f bon es o r gla ss, that c ou ld b lock
the drain are trapped in the coarse filter. To remove the items
caught by the filter, gently squeeze the tap on the top of this
filter and lift out.
This filter holds soil and food residues in the sump area and
prevents it from being redeposit on the dishes during wash cycle.
Main filter1
Coarse filter2
Fine filter3
2
3
1
Filtering System
Filter assembly
The filter efficiently
For best performance and results, the filter must be cleaned re gularly. this reason, it is a goo d idea to
remove the larger food particles trapp ed in the filter after e ach was h cycle by rinsing the semicircular filter and
cup under runnin g water. To remove the filter device, pull the cup handle in the upward d irection.re mo ves food particle s from the wash water, allowing it to be recycled during the cycle.
For
14
WARNING!
T he d ishw ash er m ust nev er b e u s ed with o ut th e fi lters .
Improper replacement of the filter may reduce the performance level of the appliance
and damage dishes and utensils.
Step 1 Turn the filter in anti-clockwise direction,
then lift it u p.：
Step 2 lift the Main filte r up：
Step 3 lift the Fine filter up：
When following th is procedure from step1 to step 3, the filter system will be removed;
when following it from Step 3 to Step 1, the filter system will be installed.
 
						

							The control panel can be cleaned by using a lightly dampened cloth.
After cleaning, make sure to dry it thoroughly.
For t he exter ior, use a g o od a pplia nce pol ish w ax.
Never use sharp objects, scouring pads or harsh cleaners on any part of the dishwasher.
Protect Against Freezing
1.Cut off the electrical power to the dishwasher.
2.Turn off the water supply and disconnect the water inlet pipe from the water valve.
3.Drain the water from the inlet pipe and water valve. (Use a pan to catch the water)
4.Reconnect the water inlet pipe to the water valve.
5.Remove the filter at the bottom of the tub and use a sponge to soak up water in the sump. please take frost protection measures on the dishwasher in winter. Every fter washing cycles,
please operate as followstime a
：
Caring for the Dishwasher
- Inspect the filters for blo cking a fter e very time the dishwa sher has been used.
- By unscrewing the coarse filter, you can remove the filter system. Re move any foo d remna nts and
clean the filters under running water.
Remarks:
Cleaning the Filter
Cleaning The Door
To cle an the coar se fi lter and the f ine f ilter, use a c lea ning b ru sh. R eass emb le th e fi lter p arts as s how n in the figu res
on the last page and reinsert the entire assembly in the dis hwa sher, positio ning it in its seat and pressing dow nwards.
The entire filter assembly should be cleaned once a week.
When cleaning the filters, dont knock on them. Otherwise, the filters could be
contorted and the performance of the dishwasher could be decreased.WARNING!
To clean the e dge around the door, you should use only a soft warm, damp cloth.
To avoid pene tration o f wa ter into the door lock and electrical components, do not
use a spray cleaner of any kind.
Never use a spray cleaner to clean the door panel as it may damage the door loc k
and electrical components.
Abrasive agents or some paper towels shou ld not be used becau se of the risk of
scratch ing or le avin g spots on th e s tainl ess ste el su rfac e.
Cleaning the Spray Arms
It is necessary to clean the spray arms regularly in order to
remove the accumulation of scale from the hard water
and thus prevent blocking of spray arm jets and bearings.
We Suggest to poke the blocked spray arm jets with a needle
to ensure good washing effect.
15
If your dis h wa s her ca n not work bec ause of t he ice, p leas e co ntac t profes sion al se rvic e pe rson s.
Unscrew
 
						

							It is recommend that you run a wash cycle with the
dishwasher empty an d the n remove the plug from the
socket, turn off the wa ter supply and leave the door of
the a ppliance slig htly op e n. This w ill h elp the d oor
seals to last longer and prevent odours from forming
within the appliance.
If the appliance must be moved, try to keep it in the
vertical position. If absolutely necessary, it can be
positioned on its back.
Oneofthefactorsthatcauseodourstoforminthe
dishwasher is food that remains trapped in the seals.
Periodic cleaning with a damp sponge will prevent this
from occ u rrin g.
After every wash, turn off the water supply to the
appliance and leave the door slightly open so that
moisture and odours are not trapped inside.
Before cleaning or performing maintenance, always
remove the plug from the socket.
To clean the exterior and rubber parts of the dishwasher,
do not use solvents or abrasive cleaning products.
O nly use a clo th w ith warm so apy water.
To remove spots o r stains from the surface of the
interior, use a cloth dampened with water an a little
vinegar, o r a cleaning pro duct mad e specifically for
dishwashers.
After Every Wash
Remove the Plug
No Solvents or Abrasive Cleaning
Moving the Appliance
Seals
When not in Use for a LongTime
16
The installation of the pipes
and electrical equipments
should be done by professionals.
Electrical Shock Hazard
Disconnect electrical power before
installing dishwasher.
Failuretodosocanresultindeathor
electrical shock.
The installation position of dishwasher should be near the existing inlet and drain hoses
and power cord.
One side of the cabinet sink should be chosen to facilitate the connection of drain hoses of
the dishwasher.
Installation preparation
Note: please check the accompanying installation accessories(hook for aesthetic panel
,screw)
●
Please carefully read the installation instruction.
●Illustrations of cabinet dimensions and installation position of the dishwasher
Preparations should b e made before moving the dishwasher to the installation place.
Choose a place near the sink to facilitate the installation of inlet and drain hoses (see figure 1).
If dishwasher is installed at the corner of the cabinet, there should be some sp ace (illustrated in figure 2)
when the door is o pened.
2
1
 
						

							Cabinet Dishwasher
Door of
dishwasher
Minimum space of 50mm
90 °90 °
450 mm
820m m
100
580mm
80
Space between cabinet
bottom and floor
Electrical, drain and
water supply line
entrances
Minimum space when
the door is opened
【】Figure2
Cabinet dimensions
【】Figure1
1The aesthetic wooden panel
could be processed according to the figure 3
The aesthetic panel should
be processed in accordance
with the illustrated dimensions
【】Figure3
●Aesthetic panels dimensions and installation
Less than 5mm
between the top
of dishwasher and
cabinet and the
outer door aligned
to cabinet.
The length of the panel should be within
the range of 537--587mm, not more
than 587mm.
19-0.50
(Unit: mm)
17
Make a furniture door according to the diagram
and not to exceed 4 kg.
 
						

							Installation of aesthetic panel
【】Figure4a
2 Install the hook on the aesthetic wooden panel and put the hook into the slot of the outer door of
dishwasher(see figure 4a). After positioning of the panel , fix the panel onto the outer door by
screws and bolts(See figure 4b) .
Installation of aesthetic
wooden panel
【】Figure4b
1
1 22
Outer door of
dishwasherAesthetic panel
H ook for aest het ic panel
ST4.5 screw
Spac er fo r a es theti c p anel
ST4.5 screw
Hook for aesthetic panel
Cover
Note: Ensure that the screws
be ing used ar e n ot to o l ong t o
go thro ugh the furn itu re doo r.
Do not put a dditi onal screw s
throu gh the dishwash er door
into the furniture.
1. take away the cover
2. pin up the screw surely
3. get back the cover
18