Westinghouse Television TX-42F810G User Manual

SETUP MENUS
47
English
OSD Timeout
Use OSD Timeout to adjust the OSD duration on the screen: 10 sec, 20 sec, or 30 
sec.
en
OSD Timeout
20 sec30 sec10 sec
Adjusting OSD Timeout
1  Use the   /   keys to select OSD Timeout and press  .
2   Press the  /  keys on the remote control to select  10 sec, 20 sec , or 30 
sec .
3  Press  to save and exit the screen.
OSD Language
Use OSD Language to select the language to display on the screen: English, 
French, or Spanish.
OSD Language
FrenchSpanishEnglish
en...

SETUP MENUS
48
English
Power Settings
Use this sub-menu to configure power-related settings for the LCD TV.
Power Settings
VGA port-DPMS
OFF
Backlight Dark Room
:Select Enter: Confirm Menu: Exit
The following options are available:
•VGA port -DPMS : Use this setting to enable or disable VGA port -DPMS. 
• Backlight: Using this setting to select  backlight options: Bright Room, 
Medium Room, and Dark Room.
Adjusting Power Settings
1  Use the   /   keys to select Power Settings and press  .
2   Use the  /...

SETUP MENUS
49
English
Reset All
Select Ye s on this sub-menu to reset all LCD TV operational settings. Do this only if 
any of the following conditions occurs:
• The system fails to respond to the re mote control (make sure the remote 
control batteries are still working an d that you are within the transmission 
range).
• The new configuration setti ngs caused unexpected results.
• You forget the system PIN.
en
Reset All
Version
Use this sub-menu to view the LCD TV’s serial number and firmware...

WALL MOUNT OPTION
50
English
WALL MOUNT OPTION
The LCD TV has been fitted with VESA FPMPMI compliant mounting holes. These 
200 x 100 mm mounting holes allow the unit  to be mounted on a wall. Use the four 
M6 x L10 mm screws to wall mount the LCD TV.
U SB
L RH
DM ICO M
PO NEN TPC  / V GAP
C  A U
DIOSPDIF O UTY
Pb
Pr
L R
WALL MOUNT INSTALLATION REMINDERS
• Remove the LCD TV base first 
before mounting the unit on a wall. 
• It is the users responsibility to us e a UL listed wall mount unit rated to...

TROUBLESHOOTING
51
English
TROUBLESHOOTING
ProblemCorrective Action
No power
• Make sure the power indicator is illuminated 
blue.
• Make sure the power cord is securely 
connected to the AC-in jack and is plugged 
into a functional AC outlet. You may want to 
plug in another electrical device to the power 
outlet to verify that it is supplying the proper 
voltage.
Power is suddenly 
turned off.Make sure the sleep timer is turned off.
Forgotten PINUse Reset All in Settings menu to reset your 
password....

TROUBLESHOOTING
52
English
No picture or the No
Signal message 
appears when a 
VGA cable is 
connected.
• Make sure the VGA cable is properly connected to the LCD TV’s VGA port.
• Decrease the video resolution setting on the 
computer and try again.
• Adjust the display settings.
Picture is cut off or 
appear in a sidebar 
screen.
Press  to adjust the Aspect ratio.
Poor image quality 
in TV mode (cutoff 
picture, snowy 
images).
• Check your antenna connection. If necessary, rotate the antenna and wait...

TROUBLESHOOTING
53
English
No sound
• Make sure the audio input cable is properly 
connected to the correct terminal, and that the 
correct input mode is enabled.
• The volume may be muted, press or Vol+ key 
to turn on the volume.
• Adjust the Bass, Treble, and Balance settings 
in Audio menu.
• If you are using the TV speakers, make sure 
the TV Speakers option is set to On in Audio 
menu.
• If you are using an external audio device, 
press and select Audio to make sure the TV 
Speakers option is set...

SPECIFICATIONS
54
English
SPECIFICATIONS
ItemSpecification
Model NameCezanne 42
Panel
Active Area 
(Diagonal, mm)697.6845 x 392.256 
Resolution1920 x 1080
Brightness 
(Nits, typ)400 nits (min) to 500 nits (typical)
Contrast Ratio 
(min)3000:1
Response Time 
(min)6.5ms(g-g)
Aspect Ratio1.77 (16:9)
Display color16.7M
Audio/Video 
Input/Output 
Terminals
•HDMI x3
• AV with R/L Audio x2
• YPbPr with R/L Audio x1
• VGA with Audio mini jack blue x1
• SPDIF Out x1
• USB for service x1
• Tuner x1
• R/L Audio...

SPECIFICATIONS
55
English
Physical 
Specifications
Dimensions 
(WxHxD)With stand: 774x549x193 mm
Without stand: 774x507x88 mm
Weight (Net)9 kgs
Weight (Gross)11.43 kgs
NOTES:
• These product specifications are  subject to change without user 
notification.
• Do not set your computer graphics  card to exceed the unit’s refresh 
rates; doing so may cause damage to the LCD TV.
ItemSpecification 

SPECIFICATIONS
56
English