Westinghouse LD-325VX Tv Users Manual

							IMPORTANT INFORMATION
7
English
WARNINGS AND PRECAUTIONS
• Do not orient the LED TV towards direct sunlight to reduce glare.
• If the LED TV will not be used for a long period of time, unplug the unit and  remove 
 the batteries from the remote control.
• Avoid touching the display screen by hand or any object.
• Never remove the rear cover. The  LED TV interior 
 contains high-voltage 
parts. You may be seriously  injured if you touch them.
• Always handle the LED TV with caution when moving it.
• Do not install the LED TV in airtight  compartments, or in
  areas where it can 
be exposed to water or high temperature.
• Ensure that the area ar ound 
 the LED TV is clean and free of moisture.
• Do not place anything on the LED TV that can hinder heat dissipation.
• Do not place naked flame sources, such  as lighted candles, on 
 or near the 
LED TV.
• Do not place anything on the LED TV that can cause liquid to splash on it  (e.g.
  flower vase).
• Do not place heavy objects on the LED 
 TV, audio/video cables, or power 
cord.
• If the LED TV emits smoke, abnormal  noise, 
 or a strange odor, immediately 
turn it off and contact the We stinghouse Service Center by:
– Logging on to www.wde.com.
– Contacting the Westinghouse Custom er Service at 
 (800) 701-0680.
– E-mailing us at [email protected]. 
						

							IMPORTANT INFORMATION
8
English
ANTENNA INSTALLATION SAFETY
Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the LED TV, be sure the 
antenna or cable system is grounded to prevent voltage surges and built-up static 
charges. Article 810 of the National Elec trical Code, ANS/NFPA 70, provides 
information on proper grounding of the mast  and supporting structure, grounding of 
the lead-in wire to an antenna discharge unit, connection to grounding electrodes, 
and requirements for the grounding electrode.
Lightning
Power lines
For added protection for the LED TV during a lightning storm, or 
when it is left unattended and unused for long periods of time, 
unplug it from the wall outlet an d disconnect the antenna or cable 
system. DO NOT  disconnect the antenna or the power cord during 
a heavy storm—lightning may strike while you are holding the 
cable cord, causing serious injury. Turn off the LED TV and wait for 
the weather to improve.
An outside antenna system should not be located in the vicinity of 
o

verhead power lines or other electric light or power circuits, or 
where it can fall into such power lines or circuits. When installing an 
outside antenna system, extreme care  should be taken to keep 
from touching such power lines or circuits as contact with them 
might be fatal.
Antenna Grounding According to the National 
Electrical Code, ANSI/NFPA 70
Antenna lead in wire
Antenna discharge unit  
(NEC Section 810-20)
Grounding Conductors  
(NEC Section 810-21)
Grounding clamps
Power service grounding  
electrode system  
(NEC Art 250 part H)
Grounding clamps
Electric service  
equipment
NEC: National Electrical Code
ZZZ 
						

							IMPORTANT INFORMATION
9
English
CLEANING THE LED TV
To clean the screen:
1Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other 
particles.
2If it is still not clean, apply a sma ll amount of non-ammonia, non-alcohol 
based glass cleaner onto a clean, soft,  lint-free cloth, and wipe the screen.
To clean the case:
1Wipe the case with a soft, dry cloth.
2If it is still not clean, apply a sma ll amount of non-ammonia, non-alcohol 
based, mild non-abrasive detergent onto a clean, soft , lint-free cloth, then 
wipe the surface.
Dolby-Digital Notice
Manufactured under license from Dolb y Laboratories. Dolby and the double-D 
symbol are registered tradema rks of Dolby Laboratories.
• Make sure the LED TV is tu
rned 
 off and the power cord is 
disconnected from the power outlet.
• Never spray or pour any liquid directly onto the screen or the  cas
 e. 
						

							PACKAGE CONTENTS
10
English
PACKAGE CONTENTS
32” LED TV UnitRemote Control (with 2x AAA batteries)
LED TV BaseQuick Connect Guide
Power CordWarranty Card
AC AdapterWarranty Brochure
Screws for BaseUser Manual
Favorite MTSZ
Z
ZC.C.
TV
Video1
HDMI1
YPbPr1
PC
Video2
HDMI2
YPbPr2 ENT
DA
B
C
Vol Input
Ch
Enter
RMT-11
M4x18 *4pcsM5x16 *1pc
Cover neck Base 
						

							CONTROL PANEL
11
English
CONTROL PANEL
ItemDescription
1. MENU Displays the LED TV setup screen.
2. Volume +/- • Adjusts the volume during playback.
•

Selects an item on a menu screen.
3. Channel +/- • Switches the channel during TV viewing.
•

Selects an item on a menu screen.
4. INPUT • Selects the video input source.
•

Executes a command on a menu screen.
5. Power Toggles the power on and off.
LRA
V 2U SBL
R
2
3
1
4
5
MENU
INPUT
VOL
CH 
						

							TERMINALS
12
English
TERMINALS
ItemFunction
1. DC in Connects the AC adapter from this outlet to a 
power source.
2. TV tuner Connects the LED TV to an antenna or cable 
ser

vice.
3. Composite AV input Connect to an external AV device such as a VCR, 
DVD

 player, set-top  box, or game system.
4. Audio in Connects to the audio out port of a computer.
5. VGA Connects to a computer or other device with a 
VGA outpu

t using a 15-pin VGA cable.
6. Audio out Connect to an audio output device.
7. SPDIF audio out Connects to an external digital audio receiver.
8. HDMI 1/2 Connects to an external AV device such as a 
VCR

, DVD player, set-top box, or game system.
9. USB Service port For service only.
SPDIF
L   
-   R
Y   -   L   -   R VGA
AUDIO IN
TUNER
DC IN HDMI 1
HDMI 2
USB
1245 7
9 8
36 
						

							REMOTE CONTROL
13
English
REMOTE CONTROL
ItemDescription
1. Mute   Mutes the sound. Press again to toggle 
th

e sound back on.
2. Power  Toggles the TV power on or off.
3. Backlight  Adjusts the LED screen backlight.
4. MTS Toggles the Multichannel Television 
S

ound options.
5. CC Toggles the closed ca
p
 tion display on or 
off.
6. Sleep  z
Zz Sets the sleep timer for the LED TV to 
tu
rn off automatically.
7. Channel keys Use to key in the channel number.
8. Favorite  Switches to the favorite channels (for 
de

tails on how to save a new favorite 
channel, see  page 22 ).
9. Enter  EN
 TExecutes a channel entry.
10. Menu  Accesses the LED TV setup menus.
11 .  R e t u r n   Switches to the last
 sele
 cted channel.
12. Arrow keys Navigate through the on-screen menus.
13. Enter  Executes a command.
14. G Displays the Electronic Program Guide 
(

EPG). It contains the program 
information for the channel you’re 
watching.
15. Info  Displays the input so
ur
 ce or channel 
information as well  as the system date 
and time.
16. Input Selects the video input source.
17. Vol +/- Ajusts the system volume.
18. Ch   /  Switches to other TV channels.
19. Aspect ratio  Selects the video display format.
20. YPbPr1 Selects VGA-Component as the input 
sour

ce.
21. TV Selects TV or HDTV as the input 
sour

ce.
22. HDMI1 Selects HDMI1 as the input source.
23. Video1 Selects the Composite AV device as the 
in

put source.
24. YPbPr2 Not supported.
25. PC Selects VGA as the input source.
26. HDMI2 Selects HDMI2 as the input source
27. Video2 Not supported.
FavoriteMTSZ
Z
ZC.C.
TV
Video1
HDMI1
YPbPr1
PC
Video2
HDMI2
YPbPr2 ENT
DA
B
C
Vol Input
Ch
Enter
RMT-11
1
7
10
14
17 3
5
2
4
6
20
22 21
23
24
26 25
27 9
19 13
16 8
11
12
15
18 
						

							REMOTE CONTROL OPERATION
14
English
REMOTE CONTROL OPERATION
INSTALLING THE REMOTE CONTROL BATTERIES
1Remove the battery cover.
2Insert the batteries. Make sure the  (+) and (–) marks on the batteries match 
those inside the compartment.
3 Re-att
ach the battery cover.
REMOTE CONTROL TRANSMISSION RANGE
Transmission range depends upon the reception angle. The range of coverage is 20° 
horizontal/vertical at a distance of 10 feet from the LED TV.CAUTIONS
:
• Only use AAA batteries.
• Do not mix new and old batteries. This may result in cracking or leakage,  which may 
 pose a fire risk or lead to personal injury.
• Insert batteries according to the (+) and (-) markings. Inserting the  batteries incorrectly may 
 result in cracking or leakage, which may pose a 
risk of fire or lead to physical injury.
• Dispose of used batteries in accordance 
 with local laws and regulations.
• Keep batteries away from children and pets.
• When the remote control will not to be used for an extended period,  remove the batteries.
FavoriteMTSZ
Z
ZC.C.
A
B 
						

							LED TV BASE
15
English
LED TV BASE
INSTALLING THE LED TV BASE
1Open the LED TV carton box.
2Remove the LED TV base.
3 Remove the 
 plastic bag.
4 Remove 
 the two top carton stabilizers from the LED TV.
5 Remove 
 the protective plastic covering the LED TV.
6 Grasp the two sides 
 of the LED TV and then pull it  out of the carton box.
7 Remove 
 the two bottom carton stabilizers from the LED TV.
8 La
y the LED TV on a clear, flat, and stable surface.
9Align the base to the bottom side 
 of the LED TV and use four M4 x 18 screws 
to secure it.
10 Carefully 
 orient the LED TV in an upright position.
11 Use one
  M5 x 16 screw to fix the stand base and LED TV on the desk.
CAUTION:
The LED TV unit may be too heavy for one person to lift. If this is the case, 
make

 sure to ask for assistance in handling the LED TV to prevent 
physical injury and/or damage to the unit. 
						

							LED TV BASE
16
English
REMOVING THE LED TV BASE
If you intend to repack the LED TV unit (for shipping or storage) or you want to 
change the installation to a wall mount option, you must first remove the LED TV 
base.
1
Turn off the LED TV and all connected devices.
2Disconnect the power cord from the LED TV.
3 Disconnect 
 all signal cables from the I/O port terminals.
4 Remove the 
 M5 x 16 screw securing the base to the desk.
5 La
y the LED TV on a clear, flat, and stable surface.
6Remove the 
 screws securing the base to the LED TV.
7 Det
ach the base from LED TV.
8Pack the screws you removed 
 in step 5 together with the LED TV base for 
future reassembly.