Westinghouse LD-325 Series Tv Users Manual
Have a look at the manual Westinghouse LD-325 Series Tv Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 23 Westinghouse manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
ANTENNA CONNECTION 17 English ANTENNA CONNECTION OUTDOOR ANTENNA CONNECTION CABLE TV (CTV/DTV) CONNECTION The unit has a TV tuner (75 ohm coaxial cable connector) located on the rear I/O panel for easy cable hookup. When connecting the 75 ohm coaxial cable to the unit, screw the 75 ohm cable to the TV tuner. Some cable TV companies offer premium pay channels. Since the signals of these channels are scrambled, a cable TV converter/descrambler is usually provided to the subscriber by the cable TV company. This converter/descrambler is necessary for normal viewing of the scrambled channels. (Set your TV to channel 3 or 4. Typically one of these channels is used. If a channel is unknown, consult your cable TV company.) For more specific instructions on installing cable TV, consult your cable TV company. One possible method of utilizing the converter/descrambler provided by your cable TV company is explained below. NOTE: The F-type connector should be finger-tightened only. When connecting the RF cable to the LED TV, do not tighten F-type connector with any tool. If tools are used, it may cause damage to the LED TV (e.g. breaking of internal circuit). Cable TV lead in VHF, UHF or VHF/UHF combination antenna 75 ohm coaxial cable (round) 300 ohm twin-lead (flat)300-75 ohm ADAPTER (Not supplied) Separate VHF/UHF Antenna VHF Antenna UHF Antenna 300 ohm twin-lead 300 ohm twin-lead 75 ohm coaxial cable COMBINER (Not supplied)Home Antenna terminal (75 ohm)RF IN IN OUT
EXTERNAL DEVICE CONNECTIONS 18 English • A position on the RF switch (not supplied) – You can view all unscrambled channels by using the TVs channel keys. • B position on the RF switch (not supplied) – You can view the scrambled channels via the converter/descrambler by using the converters channel keys. EXTERNAL DEVICE CONNECTIONS You can enjoy picture and sound by connecting various audio-video devices to the terminals located on the rear and side I/O panels of the LED TV. • TV cable input – You can use a commercially available audio/video cable. • Component (YPbPr) input – Picture can be displayed only when a 480i, 480P, 720P or 1080i signal is received. • HDMI input – Picture can be displayed only when a 640 x 480, 480P, 720P or 1080i signal is received. When you connect to the HDMI terminal with a DVI-HDMI conversion cable, there is a possibility that the picture may not display correctly. • Audio output – You can output audio signals from the LED TV set through the analog audio out and SPDIF terminals. IMPORTANT: • Turn off the LED TV first before connecting an external device to prevent any possible damage or physical injury. • For more information about external device connections, see the operation manual of the external device you wish to connect to the LED TV. • Make sure that the correct cables are connected to each terminal. Improper cable connections may cause damage to the LED TV. RF switch (not supplied) Cable TV line A B IN OUT Tw o - s e t signal splitter (Not supplied) Cable TV converter/descrambler (Not supplied)
EXTERNAL DEVICE CONNECTIONS 19 English The following diagram shows the external device connections. SPDIF L - R Y - L - R VGAAUDIO IN TUNER DC INHDMI 1 HDMI 2 USB Antenna cable / Cable TV lineAntenna / Cable systemPC Audio amplifier AUDIO OUT AUDIO OUT 3.5 mm stereo mini jack cableRGB cableAudio cable SPDIF cable HDMI-HDMI cable DVI-HDMI cable DVD player with an HDMI terminal AC adapter Power outlet Home video game system CamcorderVCR DVD player Digital TV tuner Composite AV cable DVD player with a DVI terminal
POWER CONNECTION 20 English POWER CONNECTION CONNECTING AC POWER Connect the power cord of the AC adapter to the LED TV then to a proper AC outlet. INITIAL SETUP Press on the control panel or on the remote control to turn on the LED TV. Select the desired language and select Ye s to use the SetupWizard. The SetupWizard will guide you on how to set up the LED TV’s operational settings. IMPORTANT:The LED TV is designed to be powered via an AC adapter. Use ONLY the AC adapter included in the package. Turn off all connected devices before plugging the AC adapter into the power outlet. MENU INPUTVOL CH FavoriteMTSZZ ZC.C. A B
POWER CONNECTION 21 English WESTINGHOUSE HDTV SETUP Select LanguageUse the up and down arrows on your HDTV control panel or remote control to select the language to be used for menus and messages. Press Enter to continue. Time ZoneUse the up and down arrows on your HDTV control panel or remote control to select your local time zone. Press Enter to continue. Press Go Back to return to the previous screen. Setup WizardThe Setup Wizard will help guide you through scanning channels or accessing your connected set-top-box. Press Enter to start the Setup Wizard or Skip to exit to the source list with available input options. Press Go Back to return to the previous screen. Channel Scan - AntennaSelect Antenna and press enter on your remote control to activate the ATSC tuner and scan over-the-air ATSC channels. This LCD HDTV is not capable of converting an ATSC signal until activated by the owner. Press Go Back to return to the previous screen.
POWER CONNECTION 22 English WESTINGHOUSE HDTV SETUP - THROUGH CABLE/ SATELLITE BOX Obtain ATSC Tuner Activation CodeIt is only necessary to activate the ATSC Tuner if you plan to scan for and view over- the-air ATSC broadcast content. To obtain code and activate the ATSC tuner chose an activation method from the options listed on your screen. Options will be from one to all of the following methods: Toll Free Phone Number, Website, or Text Message. Provide the activation service the Serial Number shown on your screen. Press Next to continue activation. Press Go Back to return to the previous screen. Enter Activation Code Using the remote control keypad enter the activation code provided by the ATSC Tuner Activation service. Press Go Back to return to the previous screen. Channel Scan in progress After successful ATSC Tuner Activation you will see a channel scan progress bar. This will show all analog and digital channels found during the scan as well as the signal strength of each. When the scan is complete you will be able to watch your local TV programming. Select LanguageUse the up and down arrows on your HDTV control panel or remote control to select the language to be used for menus and messages. Press Enter to continue.
POWER CONNECTION 23 English Time ZoneUse the up and down arrows on your HDTV control panel or remote control to select your local time zone. Press Enter to continue. Press Go Back to return to the previous screen. Setup WizardThe Setup Wizard will help guide you through scanning channels or accessing your connected set-top-box. Press Enter to start the Setup Wizard or Skip to exit to the source list with available input options. Press Go Back to return to the previous screen. Channel Scan - Cable/SatelliteSelect Cable/Satellite and press enter on your remote control to activate the ATSC tuner and scan cable/satellite ATSC channels. This LCD HDTV is not capable of converting an ATSC signal until activated by the owner. Press Go Back to return to the previous screen.
POWER CONNECTION 24 English Cable/Satellite SelectSelect “Yes”and then press Enter to continue.Press Go Back to return to the previous screen. Cable/Satellite Box InputSelect “Coaxial”and then press Enter to continue. Press Go Back to return to the previous screen. RF WarningSelect “Proceed”and then press Enter to continue. Press Go Back to return to the previous screen. Obtain ATSC Tuner Activation CodeIt is only necessary to activate the ATSC Tuner if you plan to scan for and view cable/satellite ATSC content. To obtain code and activate the ATSC tuner chose an activation method from the options listed on your screen. Options will be from one to all of the following methods: Toll Free Phone Number, Website, or Text Message. Provide the activation service the Serial Number shown on your screen. Press Next to continue activation. Press Go Back to return to the previous screen.
POWER CONNECTION 25 English WESTINGHOUSE HDTV SETUP - NOT THROUGH CABLE/ SATELLITE BOX Enter Activation CodeUsing the remote control keypad enter the activation code provided by the ATSC Tuner Activation service. Press Go Back to return to the previous screen. Channel Scan in progressAfter successful ATSC Tuner Activation you will see a channel scan progress bar. This will show all analog and digital channels found during the scan as well as the signal strength of each. When the scan is complete you will be able to watch your local TV programming. Select LanguageUse the up and down arrows on your HDTV control panel or remote control to select the language to be used for menus and messages. Press Enter to continue. Time ZoneUse the up and down arrows on your HDTV control panel or remote control to select your local time zone. Press Enter to continue. Press Go Back to return to the previous screen.
POWER CONNECTION 26 English Setup WizardThe Setup Wizard will help guide you through scanning channels or accessing your connected set-top-box. Press Enter to start the Setup Wizard or Skip to exit to the source list with available input options. Press Go Back to return to the previous screen. Channel Scan - Cable/SatelliteSelect Cable and press enter on your remote control to activate the ATSC tuner and scan cable/satellite ATSC channels. This LCD HDTV is not capable of converting an ATSC signal until activated by the owner. Press Go Back to return to the previous screen. Cable/Satellite SelectSelect “No”and then press Enter to continue.Press Go Back to return to the previous screen.