Westinghouse LD-2655VX Led Tv Users Manual
Have a look at the manual Westinghouse LD-2655VX Led Tv Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 23 Westinghouse manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
IMPORTANT INFORMATION 7 English WARNINGS AND PRECAUTIONS • Do not orient the LED TV towards direct sunlight to reduce glare. • If the LED TV will not be used for a long period of time, unplug the unit and remove the batteries from the remote control. • Avoid touching the display screen by hand or any object. • Never remove the rear cover. The LED TV interior contains high-voltage parts. You may be seriously injured if you touch them. • Always handle the LED TV with caution when moving it. • Do not install the LED TV in airtight compartments, or in areas where it can be exposed to water or high temperature. • Ensure that the area around the LED TV is clean and free of moisture. • Do not place anything on the LED TV that can hinder heat dissipation. • Do not place naked flame sources, such as lighted candles, on or near the LED TV. • Do not place anything on the LED TV that can cause liquid to splash on it (e.g. flower vase). • Do not place heavy objects on the LED TV, audio/video cables, or power cord. • If the LED TV emits smoke, abnormal noise, or a strange odor, immediately turn it off and contact the Westinghouse Service Center by: – Logging on to www.wde.com. – Contacting the Westinghouse Customer Service at (800) 701-0680. – E-mailing us at [email protected].
IMPORTANT INFORMATION 8 English ANTENNA INSTALLATION SAFETY Outdoor Antenna Grounding If an outside antenna or cable system is connected to the LED TV, be sure the antenna or cable system is grounded to prevent voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANS/NFPA 70, provides information on proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. Lightning Power lines For added protection for the LED TV during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. DO NOT disconnect the antenna or the power cord during a heavy storm—lightning may strike while you are holding the cable cord, causing serious injury. Turn off the LED TV and wait for the weather to improve. An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. Antenna Grounding According to the National Electrical Code, ANSI/NFPA 70 Antenna lead in wire Antenna discharge unit (NEC Section 810-20) Grounding Conductors (NEC Section 810-21) Grounding clamps Power service grounding electrode system (NEC Art 250 part H) Grounding clamps Electric service equipment NEC: National Electrical Code ZZZ
IMPORTANT INFORMATION 9 English CLEANING THE LED TV To clean the screen: 1Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. 2If it is still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen. To clean the case: 1Wipe the case with a soft, dry cloth. 2If it is still not clean, apply a small amount of non-ammonia, non-alcohol based, mild non-abrasive detergent onto a clean, soft, lint-free cloth, then wipe the surface. Dolby-Digital Notice Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are registered trademarks of Dolby Laboratories. SRS Trademark Information: • TruSurround HD, SRS and the symbol are trademarks of SRS Labs, Inc. • TruSurround HD technology is incorporated under license from SRS Labs, Inc. TruSurround HD® creates a truly immersive surround sound experience with rich bass and clear dialog from only two speakers. • Make sure the LED TV is turned off and the power cord is disconnected from the power outlet. • Never spray or pour any liquid directly onto the screen or the case.
PACKAGE CONTENTS 10 English PACKAGE CONTENTS 26” LED TV UnitRemote Control (with 2x AAA batteries) LED TV BaseUser Manual Power CordWarranty Card AC AdapterWarranty Brochure Screws for Base FavoriteMTSZZ ZC.C. TV Video1 HDMI1 YPbPr1 PC Video2 HDMI2 YPbPr2ENTDA B C VolInput Ch Enter RMT-11 M4x18 *4pcsM5x16 *1pc Cover neck Base
CONTROL PANEL 11 English CONTROL PANEL ItemDescription 1. MENUDisplays the LED TV setup screen. 2. Volume +/-• Adjusts the volume during playback. • Selects an item on a menu screen. 3. Channel +/-• Switches the channel during TV viewing. • Selects an item on a menu screen. 4. INPUT• Selects the video input source. • Executes a command on a menu screen. 5. PowerToggles the power on and off. LRAV 2USBL R 2 3 1 4 5 MENU INPUTVOL CH
TERMINALS 12 English TERMINALS ItemFunction 1. DC inConnects the AC adapter from this outlet to a power source. 2. TV tunerConnects the LED TV to an antenna or cable service. 3. Composite AV inputConnect to an external AV device such as a VCR, DVD player, set-top box, or game system. 4. Audio inConnects to the audio out port of a computer. 5. VGAConnects to a computer or other device with a VGA output using a 15-pin VGA cable. 6. Audio outConnect to an audio output device. 7. SPDIF audio outConnects to an external digital audio receiver. 8. HDMI 1/2Connects to an external AV device such as a VCR, DVD player, set-top box, or game system. 9. USB Service portFor service only. SPDIF L - R Y - L - R VGAAUDIO IN TUNER DC INHDMI 1 HDMI 2 USB 12457 9 8 36
REMOTE CONTROL 13 English REMOTE CONTROL ItemDescription 1. Mute Mutes the sound. Press again to toggle the sound back on. 2. Power Toggles the TV power on or off. 3. Backlight Adjusts the LED screen backlight. 4. MTSToggles the Multichannel Television Sound options. 5. CCToggles the closed caption display on or off. 6. Sleep zZzSets the sleep timer for the LED TV to turn off automatically. 7. Channel keysUse to key in the channel number. 8. Favorite Switches to the favorite channels (for details on how to save a new favorite channel, see page 22). 9. Enter ENTExecutes a channel entry. 10. Menu Accesses the LED TV setup menus. 11 . R e t u r n Switches to the last selected channel. 12. Arrow keysNavigate through the on-screen menus. 13. Enter Executes a command. 14. G Displays the Electronic Program Guide (EPG). It contains the program information for the channel you’re watching. 15. Info Displays the input source or channel information as well as the system date and time. 16. InputSelects the video input source.17. Vol +/-Ajusts the system volume. 18. Ch / Switches to other TV channels. 19. Aspect ratio Selects the video display format. 20. YPbPr1Selects VGA-Component as the input source. 21. TVSelects TV or HDTV as the input source. 22. HDMI1Selects HDMI1 as the input source. 23. Video1Selects the Composite AV device as the input source. 24. YPbPr2Not supported. 25. PCSelects VGA as the input source. 26. HDMI2Selects HDMI2 as the input source 27. Video2Not supported. FavoriteMTSZZ ZC.C. TV Video1 HDMI1 YPbPr1 PC Video2 HDMI2 YPbPr2ENTDA B C VolInput Ch Enter RMT-11 1 7 10 14 173 52 4 6 20 2221 23 24 2625 27 9 19 13 16 8 11 12 15 18
REMOTE CONTROL OPERATION 14 English REMOTE CONTROL OPERATION INSTALLING THE REMOTE CONTROL BATTERIES 1Remove the battery cover. 2Insert the batteries. Make sure the (+) and (–) marks on the batteries match those inside the compartment. 3Re-attach the battery cover. REMOTE CONTROL TRANSMISSION RANGE Transmission range depends upon the reception angle. The range of coverage is 20° horizontal/vertical at a distance of 10 feet from the LED TV. CAUTIONS: • Only use AAA batteries. • Do not mix new and old batteries. This may result in cracking or leakage, which may pose a fire risk or lead to personal injury. • Insert batteries according to the (+) and (-) markings. Inserting the batteries incorrectly may result in cracking or leakage, which may pose a risk of fire or lead to physical injury. • Dispose of used batteries in accordance with local laws and regulations. • Keep batteries away from children and pets. • When the remote control will not to be used for an extended period, remove the batteries. FavoriteMTSZZ ZC.C. A B
LED TV BASE 15 English LED TV BASE INSTALLING THE LED TV BASE 1Open the LED TV carton box. 2Remove the LED TV base. 3Remove the plastic bag. 4Remove the two top carton stabilizers from the LED TV. 5Remove the protective plastic covering the LED TV. 6Grasp the two sides of the LED TV and then pull it out of the carton box. 7Remove the two bottom carton stabilizers from the LED TV. 8Lay the LED TV on a clear, flat, and stable surface. 9Align the base to the bottom side of the LED TV and use four M4 x 18 screws to secure it. 10Carefully orient the LED TV in an upright position. 11Use one M5 x 16 screw to fix the stand base and LED TV on the desk. CAUTION:The LED TV unit may be too heavy for one person to lift. If this is the case, make sure to ask for assistance in handling the LED TV to prevent physical injury and/or damage to the unit.
LED TV BASE 16 English REMOVING THE LED TV BASE If you intend to repack the LED TV unit (for shipping or storage) or you want to change the installation to a wall mount option, you must first remove the LED TV base. 1Turn off the LED TV and all connected devices. 2Disconnect the power cord from the LED TV. 3Disconnect all signal cables from the I/O port terminals. 4Remove the M5 x 16 screw securing the base to the desk. 5Lay the LED TV on a clear, flat, and stable surface. 6Remove the screws securing the base to the LED TV. 7Detach the base from LED TV. 8Pack the screws you removed in step 5 together with the LED TV base for future reassembly.