Vizio Television M801d-A3 User Manual

5
24
Setting the Auto Power Off Feature
To help save energy, your TV is set by default to turn off after 10 
minutes if no signal is being displayed on the screen. This feature 
can be deactivated.
To set the Auto Power Off feature:
1 . From the Sleep Timer menu, use the Up/Down Arrow buttons 
on the remote to highlight Auto Power Off and press OK. T h e  
Auto Power-Off menu is displayed.
2 .  Highlight  Off or 10 min and press OK. Press EXIT.uSiNg the  NetwOrk cONNectiON MeNu
Your TV is internet-ready,...

5
25
Changing the Manual Setup Settings
Advanced users can fine-tune the network settings using the 
Manual Setup feature.
To change advanced network settings:
1 . From the Network menu, 
highlight  Manual Setup and 
press  OK. The Manual Setup 
menu is displayed.
2 .  Use the Arrow and OK buttons 
to adjust each setting:
• DHCP - (Dynamic Host 
Configuration  Protocol) This 
setting must be turned Off 
to change any of the other 
settings.
•  IP Address - The IP address 
assigned to the TV.
•  Subnet...

5
26
Testing Your Network Connection
To test your network connection:
1 . From the Network menu, highlight Test Connection and 
press  OK.
2 .  The Test Connection screen displays the connection 
method, network name, signal strength, and download 
speed of your network connection.
3 .  Press the EXIT button on the remote.uSiNg the tuNer  MeNu
You can use the TV’s Tuner menu to:
• Select a Tuner Input
•  Perform an Auto Channel Scan
•  Perform a Partial Channel Scan
•  Manually Add Channels
•  Select...

5
27
Selecting a Tuner Input
Select the type of tuner input you will be using. You can select either 
Antenna (Over-the-air) or Cable (Out-of-the-wall) connections.
1 . From the Tuner menu, highlight Tuner Mode and press OK. 
The Tuner Mode menu displays.
2 .  Highlight  Antenna or Cable and press OK. Press EXIT.
Scanning for Channels
Before the TV can detect and display channels and their 
associated information, you must scan for channels. A channel 
scan may also be necessary when the TV has been...

5
28
To add a single new analog channel:
1 . From the Tuner menu, highlight 
Add Analog Channel  and 
press  OK. The Add Analog 
Channel  menu is displayed.
2 .  Highlight  Enter Channel # and 
use the Number Pad on the 
remote to enter the number of 
the channel you are adding.
3 .  Highlight  Add Channel and 
press  OK. The TV scans for the 
channel. 
4 .  When the TV is done scanning 
for the channel, press the EXIT  
button on the remote. Skipping Channels
After a channel scan is completed, you may...

5
29
To use the Digital Language feature:
1 . From  the Tuner  menu, highlight 
Digital Language and press 
OK. T h e  Digital Language menu 
is displayed.
2 .  Select your preferred language: 
English,  Français or Español. 
Press  OK.
3 .  Press the EXIT button on the 
remote.  
Help
VIZIO
Netw ork
Sleep
Timer
Input CC
ABC
A udio
W ide
Normal
Pict ure
S e ttings
PanoramicW ideZoom
2D3DExit
Digital Language
English
Français Español
Changing the  Audio Language
Some digital free-to-air and cable channels...

5
30
SettiNg up clOSeD captiONiNg
Your TV can display closed captions for programs that include 
them. Closed captions display a transcription of a program’s 
dialogue.
To activate or deactivate closed 
captions:
1 . Press the MENU button on the 
remote. The on-screen menu is 
displayed.
2 .  Use the Arrow buttons on the 
remote to highlight CC and 
press  OK. The Closed Caption 
menu is displayed.
3 .  Use the Arrow buttons on the 
remote to highlight the type 
of closed captions you wish to 
see:
•...

5
31
chaNgiNg the tv  SettiNgS
Using the settings menu, you can:• View the System Information
•  Name the TV inputs
•  Set up Parental Controls
•  Change the on-screen 
menu language
•  Set the time
•  Adjust the CEC settings
•  Adjust the Power Indicator 
settings
•  Reset TV Settings & Admin 
Controls
Hel p
VIZIO
Netw ork
Sleep
Timer
Input CC
ABC
A udio
W ide
Normal
Pict ure
S e ttings
PanoramicW ideZoom
2D3DExit
System
System Information
Name Input
Parental Controls
Menu Language...

5
32
Changing the Names of the Inputs
To make it easier to recognize the different devices attached to 
the inputs on your TV, you can rename the inputs. For example, if 
you have a DVD player connected to the Component input, you 
can rename that input to display “DVD Player”.
To change the name of an input:
1 . Press the MENU button on the 
remote. The on-screen menu is 
displayed.
2 .  Use the Arrow buttons on the 
remote to highlight System and 
press  OK. The System menu is 
displayed.
3 .  Use the...

5
33
Enabling or Disabling Program Ratings
To manage program content according to its rating, you must 
enable the Program Rating feature.
To enable or disable the Program Rating feature:
1 . From the Parental Controls menu, highlight Rating Enable  
and press OK. The Rating Enable menu is displayed.
2 .  Select  On or Off  and press OK.
Locking and Unlocking Channels
When a channel is locked, it will be inaccessible. Locking 
a channel is a good way to prevent children from viewing 
inappropriate...