Home > Vizio > Television > Vizio Television E551d-A0 User Manual

Vizio Television E551d-A0 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Vizio Television E551d-A0 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 98 Vizio manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							1
    4
    To install the base:
    1 . Align the neck piece with the bottom of the TV and slide it 
    into place as shown.
    2 .  Using the included hex wrench, tighten four (4) M4 12mm 
    hex screws into the holes on the back of the TV to secure the 
    neck piece. 
    3 . Align the base with the neck and tighten three (3) M4 
    16mm hex screws using the included hex wrench.      
    						
    							1
    5
    Installing the TV on a Wall
    To mount your TV on a wall, you will need a wall mount. Consult 
    the information below to find the appropriate mount for your TV 
    model:
    Installing a TV on a wall requires lifting. To prevent 
    injury or damage to the TV, ask someone to help you.
    e551d-a0
    Screw Size: M6
    Screw Pitch: 1.0mm
    Screw Length: 20mm
    Hole Pattern: 400mm (V) x 400mm (H)
    Be sure the mount you choose is capable of supporting the 
    weight of the TV. After you have determined that you have the 
    correct mount for your TV, you can begin the installation.
    To install your TV on a wall:
    1 .  Disconnect any cables connected to your TV.
    2 .  Place the TV face-down on a clean, flat, stable surface. 
    Be sure the surface is clear of debris that can scratch or 
    damage  the TV.
    3 .  Remove the base by loosening and removing the screws.
    4 .  Attach your TV and wall mount to the wall, carefully following 
    the instructions that came with your mount.  
     
    Use only with a UL-listed wall mount bracket rated for the 
    weight/load of this TV. See 
    Appendix A - Specifications for 
    the weight of this TV.    
    						
    							2
    6
    Controls and Connections
    21
     CA BLE / 
    ANTENNA(ARC)
    Ethernet - Connect Ethernet cable from home network. Coaxial - Connect coaxial cable from cable, satellite, or 
    antenna. Optical Audio Out - Connect optical/SPDIF audio device, 
    such as home audio receiver.
    Stereo Audio Out - Connect 3.5mm audio device, such 
    as sound bar. HDMI - Connect HDMI device.
    Component/Composite - Connect component or 
    composite device. USB - Connect USB thumb drive to play photo, music, 
    or video.
    BA
    Ck P AnEl  
    						
    							2
    7
    INPUT
    MENU
    CH ^
    CH 
    VOL ^
    VOL 
    ^
    ^
    POWER - Turn TV off or on.
    MEnU - Open the on-screen menu.CHAnnEl UP/DOWn - Change the channel.
    VOlUME UP/DOWn - Increase or decrease volume level.
    InPUT - Change input source.
    SIDE P
    AnEl  
    						
    							2
    8
    Front Panel
    REMOTE SEnSOR & POWER InDICATOR  
    When using the remote, aim it directly at this sensor.
    FROnT P AnEl  
    						
    							2
    9
    remote Control
    InPut 
    Change the currently-displayed input.
    arrow  
    Navigate the on-screen menu.
    exIt 
    Close the on-screen menu.Closed CaPtIons
     
    Open the closed caption menu.
    a/V Controls 
    Control USB media player.
    wIde 
    Switch the display mode.
    mute 
    Turn the audio off or on.
    BaC
    k 
    Go to the previous on-screen menu. Power
     
    Turn TV on or off.
    menu
     
    Display the on-screen menu.
    InFo  
    Display the info window.
    d
    ash
     
    Use with number pad to manually 
    enter a digital sub-channel. 
     
    (For example, 18-4 or 18-5.) Channel uP/down
     
    Change the channel. GuIde
     
    Display the info window.
    last 
    Return to the channel last viewed.
    numBer Pad 
    Manually enter a channel.
    Volume uP/down 
    Increase or decrease loudness of  
    the audio.
    ok 
    Select the highlighted menu option.
    V Button 
    Open the VIA dock.
    aPP launCher 
    Quickly launch the pictured app.
    REMOTE COnTROl             
    						
    							2
    10
    Replacing the Batteries
    1 . Remove the battery cover.
    2 .  Insert two batteries into the remote control. Make sure that 
    the (+) and (-) symbols on the batteries match the (+) and 
    (-) symbols inside the battery compartment.
    3 .  Replace the battery cover.  
    						
    							3
    11
    Connecting Your  Devices
    2
    1
     C
    A BLE / 
    ANTENNA(ARC)
    ConneCting A DeviCe
    BETTER
    COMPONENT CABLE• ANALOG • HD VIDEO (1080P)* • STEREO AUDIO
    BEST
    HDMI CABLE • DIGITAL 
    •  HD VIDEO (1080p)* 
    • HD AUDIO
    GOOD
    AV CABLE
    • ANALOG 
    • VIDEO (480i)* 
    • STEREO AUDIO
    * Maximum Resolution
    Game Console
    Cable/Satellite Box
    DVD/Blu-ray Player
    Your TV can be used to display output from most devices. 
    1 . 
    Verify that your device has a video port that matches an 
    available port on the TV (HDMI, Component, etc).
    2 .  Turn the TV and your device off.
    3 .  Connect the appropriate cable (not included) to the TV and 
    the device.
    4 .  Turn the TV and your device on. Set the TV’s input to match 
    the connection you used (HDMI-1, HDMI-2, etc).   
    						
    							3
    12
    HDMI CABLE
    HDMI is the intelligent, all-digital interface 
    that delivers both dazzling quality and 
    unmatched ease of use. HDMI technology 
    transmits crystal-clear digital video along with 
    multi-channel surround audio. HDMI-connected 
    devices have the ability to automatically adjust 
    themselves for optimal viewing.
    COMPONENT CABLE
    Component cables are designed to carry high 
    definition video signals along with additional 
    audio connections. Colors are delivered with 
    color information split up three different ways 
    over three connectors for video (separated into 
    Red, Blue and Green signals) and the left and 
    right audio connectors (Red and White).
    AV CABLE
    AV cables (or Composite cables) are the 
    traditional way of connecting your devices to 
    your TV. Video signals are sent over the yellow 
    connector while audio is sent over the red and 
    white connectors.
    GOODBETTER
    HDMI
    COMPONENT VIDEO
    COMPONENT VIDEO
    YLR
    RLPr/Cr Pb/Cb Y HDMI
    • HD Video Resolutions up   
    to 1080P
    •  HD Audio
    •  Digital Connection
    •  Audio and Video Signals
    • 
    HD Video Resolutions up   
    to 1080p
    •  Analog Connection
    •  Audio and Video Signals
    • 
    Video Resolutions up to 480i
    •  Analog Connection
    •  Audio and Video Signals
    BEST
    CONNECTING A DEVICE - A UDIO AND VIDEO CABLE TYPES  
    						
    							3
    13
    21
     CA BLE / 
    ANTENNA(ARC)
    ConneCting An AuDio DeviCe
    Home Audio Receiver
    VIZIO Sound Bar
    Your TV can output sound to an audio device, such as a receiver 
    or sound bar. 
    1 . 
    Verify that your device has a video port that matches an 
    available port on the TV (Optical, 3.5mm, etc).
    2 .  Turn the TV and your audio device off.
    3 .  Connect the appropriate cable (not included) to the TV and 
    the device.
    4 .  Turn the TV and your device on.
    BEST
    HDMI CABLE• CFC 2-WAY COMMUNICATION • 2.0-5.1 DIGITAL AUDIO • PCM, DTS, DOLY DIGITAL
    BETTER
    OPTICAL/SPDIF CABLE• PCM STREAM • DOLBY DIGITAL 5.1 CHANNEL • DTS 5.1 CHANNEL
    GOOD
    3.5MM CABLE• ANALOG STEREO CONNECTION • 2.0 CHANNEL    
    						
    All Vizio manuals Comments (0)

    Related Manuals for Vizio Television E551d-A0 User Manual