Vizio Television E420i-B0 Specifications

1
5
To install the base:
1 . Align the neck piece with the bottom of the TV and slide it 
into place as shown.
2 .  Using a Phillips screwdriver, tighten three (3) M4 12mm 
Phillips screws into the center of the neck piece using a 
Phillips screwdriver to secure it to the TV.
3 .  When you are finished, place the TV on a stable,   
level surface.
installing the TV on a Wall
To mount your TV on a wall, you will need a wall mount. Consult 
the information below to find the appropriate mount for your TV...

2
6
Controls and Connections
BaCk Panel
ethernet - Connect an Ethernet cable from home network. Coaxial - Connect coaxial cable from cable, satellite, or antenna. optical a udio out - Connect an optical/SPDIF audio device, such as 
home audio receiver.
stereo a udio out - Connect an RCA audio device, such as sound bar.
hdmi - Connect an HDMI device.
Component/Composite - Connect a component or composite device. usB - Connect a USB thumb drive to play photos, music, or videos.
hdmi - Connect an HDMI...

2
7
side Panel
Power/input - Press once to turn on the TV.
Press once to access the Input menu. Press and hold to turn off the TV.   

2
8
Front Panel
remoTe sensor & Po Wer indiCaTor   
When using the remote, aim it directly at this sensor.
The power indicator flashes on when the TV turns on, then goes out after several seconds.  
To keep the power indicator on as long as the TV is on, see 
“Turning the Power Indicator On or 
Off” on page 47.
fronT Panel  

2
9
remote Control
remoTe ConTrol
Volume uP/do Wn 
Increase or decrease loudness of the audio.
V BuTTon 
Open the VIZIO Internet Apps Plus® dock.
inPuT 
Change the currently-displayed input.
arroW  
Navigate the on-screen menu.
exiT 
Close the on-screen menu.
Closed CaPTions 
Turn closed captions on or off.
a/V ConTrols 
Control USB media player.
numBer Pad 
Manually enter a channel.
BaCk 
Go to the previous on-screen menu.
PoWer 
Turn TV on or off.
menu 
Display the on-screen menu.
info  
Display the...

2
10
replacing the Batteries
1 . Remove the battery cover.
2 .  Insert two batteries into the remote control. Make sure that 
the (+) and (-) symbols on the batteries match the (+) and 
(-) symbols inside the battery compartment.
3 .  Replace the battery cover.  

3
11
Connecting Your devices
ConneCting a DeviCe
Game Console
Cable/Satellite Box
DVD/Blu-ray Player
Your TV can be used to display output from most devices. 
1 . 
Verify that your device has a video port that matches an 
available port on the TV (HDMI, Component, etc.).
2 .  Turn the TV and your device off.
3 .  Connect the appropriate cable (not included) to the TV and 
the device.
4 .  Turn the TV and your device on. Set the TV’s input to match 
the connection you used (HDMI-1, HDMI-2, etc.).
*...

3
12
COAXIAL CABLE
Coaxial cables are the traditional way of connecting 
antennas and cable television signals to your TV. 
Coaxial cables carry both audio and video signals 
through a single connector.
AV CABLE
AV cables (or Composite cables) are the traditional 
way of connecting your devices to your TV. Video 
signals are sent over the yellow connector while audio 
is sent over the red and white connectors.
goodBeTTer
COMPONENT VIDEO
YLR
• hd Video resolutions up to 1080i
•  analog Connection
•  audio...

3
13
HDMI CABLE
HDMI is the intelligent, all-digital interface that delivers 
both dazzling quality and unmatched ease of use. HDMI 
technology transmits crystal-clear digital video along 
with multi-channel surround audio. HDMI-connected 
devices have the ability to automatically adjust 
themselves for optimal viewing.
COMPONENT CABLE
Component cables are designed to carry high 
definition video signals along with additional 
audio connections. Colors are delivered with color 
information split up three...

3
14
ConneCting an auDio DeviCe
Home Audio Receiver
VIZIO Sound Bar
Your TV can output sound to an audio device, such as a receiver 
or sound bar. 
1 . 
Verify that your device has an audio port that matches an 
available port on the TV (HDMI or RCA).
2 .  Turn the TV and your audio device off.
3 .  Connect the appropriate cable (not included) to the TV and 
the device.
4 .  Turn the TV and your device on.
BesT
hdmi C aBle• CeC 2-W aY CommuniC aTion • 2.0-5.1 digiT al audio • PCm, dTs , dolBY digiT al...