Vizio Television E390i-B1 Specifications

							1
5
4 .  Align the base with the neck and tighten three (3) M4 14mm 
screws.
5 .  When you are finished, place the TV on a stable,   
level surface.2 .  Align the neck piece with the bottom of the TV and slide it 
into place as shown.
3 .  Using a Phillips screwdriver, tighten three (3) M4 14mm 
screws into the center of the neck piece to secure it to the 
T V.      
						

							1
6
installing the TV on a Wall
To mount your TV on a wall, you will need a wall mount. Consult 
the information below to find the appropriate mount for your TV 
model:
Installing a TV on a wall requires lifting. To prevent 
injury or damage to the TV, ask someone to help you.
e390i-B1
Screw Size:M4
Hole Pattern: 100mm (V) x 100mm (H)
Weight w/o Stand: 14.11 lbs
Be sure the mount you choose is capable of supporting the 
weight of the TV. After you have determined that you have the 
correct mount for your TV, you can begin the installation.
To install your TV on a wall:
1 . Disconnect any cables connected to your TV.
2 .  Place the TV face-down on a clean, flat, stable surface. 
Be sure the surface is clear of debris that can scratch or 
damage  the TV.
3 .  Remove the base by loosening and removing the screws.
4 .  Attach your TV and wall mount to the wall, carefully following 
the instructions that came with your mount.  
 
Use only with a UL-listed wall mount bracket rated for the 
weight/load of this TV.    
						

							2
7
Controls and Connections
ethernet - Connect an Ethernet cable from home network. Coaxial - Connect coaxial cable an antenna, or from a cable or 
satellite box. optical audio out - Connect an optical/SPDIF audio device, such as 
home audio receiver.
stereo a udio out - Connect an RCA audio device, such as sound bar.
hdmi - Connect an HDMI device.
Component/Composite - Connect a component or composite device. usB - Connect a USB thumb drive to play photos, music, or videos.
hdmi - Connect an HDMI device.
B
aCk Panel
Note: The image shown here is for illustrative purposes only and may be subject to change.  
The actual number of ports and their locations may vary, depending on the model.  
						

							2
8
side Panel
Power/input - Press once to turn on the TV.
Press once to access the Input menu. Press and hold to turn off the TV.   
						

							2
9
Front Panel
remoTe sensor & Po Wer indiCaTor   
When using the remote, aim it directly at this sensor.
The power indicator flashes on when the TV turns on, then goes out after several seconds.  
To keep the power indicator on as long as the TV is on, see 
“Turning the Power Indicator On or 
Off” on page 48.
fronT Panel  
						

							2
10
remote Control
InPut 
Change the currently-displayed input.
arrow  
Navigate the on-screen menu.
exIt 
Close the on-screen menu.Closed CaPtIons
 
Turn closed captions on or off.
a/V Controls 
Control USB media player.
wIde 
Switch the display mode.
mute 
Turn the audio off or on.
BaC
k 
Go to the previous on-screen menu. Power
 
Turn the TV on or off.
menu
 
Display the on-screen menu.
InFo  
Display the info window.
d
ash
 
Use with number pad to manually 
enter a digital sub-channel. 
 
(For example, 18-4 or 18-5.) Channel uP/down
 
Change the channel. GuIde
 
Display the info window.
last 
Return to the channel last viewed.
numBer Pad 
Manually enter a channel.
Volume uP/down 
Increase or decrease loudness of  
the audio.
ok 
Select the highlighted menu option.
V Button 
Open the V.I.A. Plus Dock.
aPP launCher 
Quickly launch the pictured App.
remo Te ConTrol             
						

							2
11
replacing the Batteries
1 . Remove the battery cover.
2 .  Insert two batteries into the remote control. Make sure that 
the (+) and (-) symbols on the batteries match the (+) and 
(-) symbols inside the battery compartment.
3 .  Replace the battery cover.  
						

							3
12
Connecting Your devices
ConneCtInG a deVICe
BeTTer
ComPonenT CaBle• analog • hd Video (1080i)* • sTereo audio
BesT
hdmi C aBle • digiTal 
• hd Video (1080p)* 
• hd audio
good
aV C aBle • analog 
• Video (480i)* 
• sTereo audio
* Maximum Resolution
Game Console
Cable/Satellite Box
DVD/Blu-ray Player
Your TV can be used to display output from most devices. 
1 . 
Verify that your device has a video port that matches an 
available port on the TV (HDMI, Component, etc.).
2 .  Turn the TV and your device off.
3 .  Connect the appropriate cable (not included) to the TV and 
the device.
4 .  Turn the TV and your device on. Set the TV’s input to match 
the connection you used (HDMI-1, HDMI-2, etc.).
Ba Ck  of TV
Note: The image shown here is for illustrative purposes only and may be subject to change.  
The actual number of ports and their locations may vary, depending on the model.
BeTTer
CoaXial C aBle• analog • hd Video (1080i)* • sTereo audio   
						

							3
13
COAXIAL CABLE
Coaxial cables are the traditional way of connecting 
antennas and cable television signals to your TV. 
Coaxial cables carry both audio and video signals 
through a single connector.
AV CABLE
AV cables (or Composite cables) are the traditional 
way of connecting your devices to your TV. Video 
signals are sent over the yellow connector while audio 
is sent over the red and white connectors.
goodBeTTer
COMPONENT VIDEO
YLR
• hd Video resolutions up to 1080i
•  analog Connection
•  audio and Video signals
• 
Video resolutions up to 480i
•  analog Connection
•  audio and Video signals
ConneCTing a  deViCe - audio and Video CaBle TYPes  
						

							3
14
HDMI CABLE
HDMI is the intelligent, all-digital interface that delivers 
both dazzling quality and unmatched ease of use. HDMI 
technology transmits crystal-clear digital video along 
with multi-channel surround audio. HDMI-connected 
devices have the ability to automatically adjust 
themselves for optimal viewing.
COMPONENT CABLE
Component cables are designed to carry high 
definition video signals along with additional 
audio connections. Colors are delivered with color 
information split up three different ways over three 
connectors for video (separated into Red, Blue and 
Green signals) and the left and right audio connectors 
(Red and White).
BeTTer
COMPONENT VIDEO
RLPr/Cr Pb/Cb YHDMIHDMI
• hd Video resolutions up to 1080p
•  hd a udio
•  digital Connection
•  audio and Video signals
• 
hd Video resolutions up to 1080i
•  analog Connection
•  audio and Video signals
BesT