Home > Vizio > Television > Vizio Television E390-B0 Specifications

Vizio Television E390-B0 Specifications

Here you can view all the pages of manual Vizio Television E390-B0 Specifications. The Vizio manuals for Television are available online for free. You can easily download all the documents as PDF.

Page 11

1
5
Installing the TV on a Wall
To mount your TV on a wall, you will need a wall mount. Consult 
the information below to find the appropriate mount for your TV 
model:
Installing a TV on a wall requires lifting. To prevent 
injury or damage to the TV, ask someone to help you.
E390-B0
Screw Size: M4
Screw Pitch: 0.70mm
Screw Length: 12mm
Hole Pattern: 100mm (V) x 100mm (H)
Be sure the mount you choose is capable of supporting the 
weight of the TV. After you have determined that you have the 
correct...

Page 12

2
6
REAR PANEL
Controls and Connections
Coaxial - Connect coaxial cable from cable, satellite, or antenna. Optical Audio Out - Connect optical/SPDIF audio device, such as 
home audio receiver.
Stereo Audio Out - Connect RCA audio device, such as sound bar.
Component/Composite - Connect component or composite device. USB - Connect USB thumb drive to play photos.
HDMI - Connect HDMI device.
REAR PANEL
HDMI - Connect HDMI device.  

Page 13

2
7
SIDE PANEL
SIDE PANEL
POWER - Press and hold to turn TV on or off.
INPUT - Press to  change input source.   

Page 14

2
8
FRONT PANEL
REMOTE SENSOR & POWER INDICATOR  
When using the remote, aim it directly at this sensor.
The power indicator flashes on when the TV turns on, then goes out after 
several seconds. To keep the power indicator on as long as the TV is on,   
see 
Turning the Power Indicator On or Off on page 39.
FRONT PANEL  

Page 15

2
9
REMOTE CONTROL
REMOTE CONTROL
INPUT 
Change the currently-displayed input.
ARROW  
Navigate the on-screen menu.
EXIT 
Close the on-screen menu.CLOSED CAPTIONS
 
Open the closed caption menu.
A/V CONTROLS 
Control USB photo viewer.
WIDE 
Switch the display mode.
MUTE 
Turn the audio off or on.
BAC K 
Go to the previous on-screen menu. POWER
 
Turn TV on or off.
MENU
 
Display the on-screen menu.
INFO  
Display the info window.
DASH
 
Use with number pad to 
manually enter a digital 
sub-channel....

Page 16

2
10
Replacing the Batteries
1 . Remove the battery cover.
2 .  Insert two batteries into the remote control. Make sure that 
the (+) and (-) symbols on the batteries match the (+) and 
(-) symbols inside the battery compartment.
3 .  Replace the battery cover.  

Page 17

3
11
Connecting Your  Devices
CONNECTING A DEVICE
Game Console
Cable/Satellite BoxDVD/Blu-ray Player
Your TV can be used to display output from most devices. 
1 . 
Verify that your device has a video port that matches an 
available port on the TV (HDMI, Component, etc).
2 .  Turn the TV and your device off.
3 .  Connect the appropriate cable (not included) to the TV and 
the device.
4 .  Turn the TV and your device on. Set the TV’s input to match 
the connection you used (HDMI, Component, etc).
BETTER...

Page 18

3
12
COAXIAL CABLE
Coaxial cables are the traditional way of connectiong 
antennas and cable television signals to your TV. 
Coaxial cables carry both audio and video signals 
through a single connector.
AV CABLE
AV cables (or Composite cables) are the traditional 
way of connecting your devices to your TV. Video 
signals are sent over the yellow connector while audio 
is sent over the red and white connectors.
GOODBETTER
COMPONENT VIDEO
YLR
• HD Video Resolutions up to 1080i
•  Analog Connection
•...

Page 19

3
13
HDMI CABLE
HDMI is the intelligent, all-digital interface that delivers 
both dazzling quality and unmatched ease of use. HDMI 
technology transmits crystal-clear digital video along 
with multi-channel surround audio. HDMI-connected 
devices have the ability to automatically adjust 
themselves for optimal viewing.
COMPONENT CABLE
Component cables are designed to carry high 
definition video signals along with additional 
audio connections. Colors are delivered with color 
information split up three...

Page 20

3
14
CONNECTING AN AUDIO DEVICE
Home Audio Receiver
VIZIO Sound Bar
Your TV can output sound to an audio device, such as a receiver 
or sound bar. 
1 . 
Verify that your device has an audio port that matches an 
available port on the TV (HDMI, RCA, etc).
2 .  Turn the TV and your audio device off.
3 .  Connect the appropriate cable (not included) to the TV and 
the device.
4 .  Turn the TV and your device on.
BETTER
OPTICAL/SPDIF CABLE• PCM STREAM • DOLBY DIGITAL 5.1 CHANNEL • DTS 5.1 CHANNEL
BEST
HDMI...
Start reading Vizio Television E390-B0 Specifications

Related Manuals for Vizio Television E390-B0 Specifications

All Vizio manuals