Vizio M602iB3 HDTV User Manual

1
5
3 . Align the base with the neck.
4 .  Insert and tighten four (4) included M5 23mm Phillips screws 
into the bottom of the base as shown.
5 .  When you are finished, place the TV on a stable, level 
surface.    

1
6
Installing the TV on a Wall
To mount your TV on a wall, you will need a wall mount. Consult 
the information below to find the appropriate mount for your TV 
model:
Installing a TV on a wall requires lifting. To prevent 
injury or damage to the TV, ask someone to help you.
M602i-B3M702i-B3
Screw Size: M6 M6
Hole Pattern: 400mm (V) x 
400mm (H) 400mm (V) x 
400mm (H)
Weight w/o Stand: 53.77 lbs60.56 lbs
Be sure the mount you choose is capable of supporting the 
weight of the TV. After you have...

2Controls and Connections
REAR PANEL
Ethernet - Connect Ethernet cable from home network. Coaxial - Connect coaxial cable from cable, satellite, or 
antenna.
Optical Audio Out - Connect optical/SPDIF audio device, 
such as home audio receiver.
Stereo Audio Out - Connect RCA audio device, such as 
sound bar. Component/Composite - Connect component or 
composite device. USB - Connect USB thumb drive to play photo, music, 
or video.
HDMI - Connect HDMI device.
REAR PANEL
HDMI - Connect HDMI device....

2
8
FRONT PANEL
FRONT PANEL
REMOTE SENSOR & POWER INDICATOR  
When using the remote, aim it directly at this sensor.
The power indicator flashes on when the TV turns on, then goes out after several seconds.  
To keep the power indicator on as long as the TV is on, see 
Turning the Power Indicator On or 
Off
 on page 48.  

2
9
REMOTE CONTROL
APP LAUNCHER 
Quickly launch the pictured App.
INPUT 
Change the currently displayed input.
NUMBER PAD 
Manually enter a channel. WIDE 
Change the display mode.
ARROW  
Navigate the on-screen menu. POWER 
Turn TV on or off.
INFO  
Display the info window.
MENU 
Display the on-screen menu. 
GUIDE 
Display the info window.
PIC
Opens the Picture Mode menu.
V BUTTON 
Open the VIZIO Internet Apps Plus® (V.I.A. 
Plus) dock.
CHANNEL UP/DOWN 
Change the channel.
LAST 
Return to the channel...

2
10
ARROW 
Navigate the on-screen  menu.SHIFT 
Press and hold while 
pressing another key to  enter a capital letter.A LT  
Press and hold while pressing 
another key to enter a blue 
character. For example, press ALT 
and W to enter a # character.
DO NOT COVER THIS AREA 
This is the transmitter.
REMOTE CONTROL             

2
11
Insert two batteries into the remote control. Make sure that the 
(+) and (-) symbols on the batteries match the (+) and (-) 
symbols inside the battery compartment.Replace the battery cover.
Replacing the Batteries
P
ress in on the button on the rear of the remote.Remove the battery cover.
1
3
2
4       

3
12
Connecting Your  Devices
CONNECTING A DEVICE
Game Console
Cable/Satellite BoxDVD/Blu-ray Player
Your TV can be used to display output from most devices. 
1 . 
Verify that your device has a video port that matches an 
available port on the TV (HDMI, Component, etc.).
2 .  Turn the TV and your device off.
3 .  Connect the appropriate cable (not included) to the TV and 
the device.
4 .  Turn the TV and your device on. Set the TV’s input to match 
the connection you used (HDMI-1, HDMI-2, etc.).
*...

3
13
COAXIAL CABLE
Coaxial cables are the traditional way of connecting 
antennas and cable television signals to your TV. 
Coaxial cables carry both audio and video signals 
through a single connector.
AV CABLE
AV cables (or Composite cables) are the traditional 
way of connecting your devices to your TV. Video 
signals are sent over the yellow connector while audio 
is sent over the red and white connectors.
GOODBETTER
COMPONENT VIDEO
YLR
• HD Video Resolutions up to 1080i
•  Analog Connection
•  Audio...

3
14
HDMI CABLE
HDMI is the intelligent, all-digital interface that delivers 
both dazzling quality and unmatched ease of use. HDMI 
technology transmits crystal-clear digital video along 
with multi-channel surround audio. HDMI-connected 
devices have the ability to automatically adjust 
themselves for optimal viewing.
COMPONENT CABLE
Component cables are designed to carry high 
definition video signals along with additional 
audio connections. Colors are delivered with color 
information split up three...