Vizio E650i-A2 Tv User Manual

							5
25
Adjusting the Color Temperature
Adjusting the color temperature will change the “warmness” or 
“coolness” of the white areas of the picture.
To adjust the color temperature:
1 . From the Picture Menu, use 
the  Arrow buttons to highlight 
More, then press OK.
2 .  Use the Arrow buttons on 
the remote to highlight Color 
Temperature, then press OK. 
The Color Temperature menu is 
displayed.
3 .  Use the Arrow buttons on 
the remote to highlight Color 
Temperature, then use the 
Left/Right Arrow buttons to 
change the color temperature 
preset:
• Cool produces a blue-hued 
picture.
•  Computer optimizes the 
picture for use as a PC 
monitor.
•  Normal is optimized for 
television viewing.
•  Custom allows you to 
manually change each 
of the color temperature 
settings:
Red/green/Blue gain - Adjusts the amount of each 
color in the display.
Red/green/Blue Offset - Adjusts the position of each 
color in the display.
4 .  If you want to reset the color temperatures to the factory 
default settings, highlight Reset  Color Temperature and 
press  OK. Highlight Ye s  and press OK.
5 .  When you have finished adjusting the color temperature, 
press the EXiT button on the remote.
Hel p
VIZIO
Netw ork
Sleep
Timer
Input CC
ABC
A udio
W ide
Normal
Pict ure
S e ttings
PanoramicW ideZoom
2D3DExit
Color Temperature
Color Temperature              Normal
Red Gain 128
Green Gain 128
Blue Gain 128
Red Offset 128
Green Offset 128
Blue Offset 128
Reset  Color Temperature
Adjusting the Picture Size and Position
When displaying an image, the size and position of the display 
image can be adjusted.
To adjust the picture size and position:
1 .  From the Picture menu, use the 
Arrow buttons on the remote to 
highlight  More, then press OK. 
2 .  Use the Arrow buttons on the 
remote to highlight Size & 
Position, then press OK. The  Size 
& Position menu is displayed.
3 .  Use the Arrow buttons to 
highlight the setting you wish 
to adjust, then press Left/Right 
Arrow to change the setting:
• Horiz. Position - Adjusts 
the horizontal (left/right) 
position of the display 
image.
•  Vertical Position - Adjusts 
the vertical (up/down) 
position of the display 
image.
•  Horizontal Size - Adjusts the width of the display image.
•  Vertical Size - Adjusts the height of the display image.
4 .  When you have finished adjusting the picture size and 
position, press the EXiT button on the remote.
-+
-+
-+
-+
-+
Hel p
VIZIO
Netw ork
Sleep
Timer
Input CC
ABC
A udio
W ide
Normal
Pict ure
S e ttings
PanoramicW ideZoom
2D3DExit
+
Size & Position
Horiz. Position 32
Vertical Position 16
Horizontal Size 0
Vertical Size 0
-+
-+
-+
-+
-
-  
						

							5
26
Resetting the Picture Settings 
To reset the picture settings to the factory default settings:
1 . From the Picture menu, use the Arrow buttons to highlight 
More, then press OK.
2 .  Use the Arrow buttons on the remote to highlight Reset 
Picture Mode, then press OK. The TV displays, “Are you sure 
you want to RESET Picture Settings to the factory defaults?”
3 .  Highlight  Ye s and press OK.
4 .  Press the EXiT button on the remote.  
						

							5
27
adjuStiNg the audiO SettiNgS
To adjust the audio settings:
1 .  Press the MENU button on the 
remote. The on-screen menu is 
displayed.
2 .  Use the Arrow buttons on the 
remote to highlight Audio and 
press  OK. The Audio  Settings 
menu is displayed.
3 .  Use the Arrow buttons to 
highlight the setting you wish 
to adjust, then press Left/Right 
Arrow to change the setting:
• Audio Mode - Change the 
audio mode. This setting 
is only available when SRS 
StudioSound HD is set to 
Standard.
•  Balance - Adjusts the 
loudness of the audio 
output from the left and 
right speakers.
•  Lip Sync - Adjusts the syn-
chronization between the 
display image and the 
accompanying audio track.
•  TV Speakers - Turns the 
built-in speakers on or off.
•  SRS StudioSound HD - StudioSound HD™ is a feature-rich 
surround sound solution which delivers an immersive 
surround sound experience from the TV’s internal 
speakers. Additionally, StudioSound HD completes the 
entertainment experience by maintaining a steady 
volume while watching programming and movies, 
Hel p
VIZIO
Netw ork
Sleep
Timer
Input CC
ABC
A udio
W ide
Normal
Pict ure
S e ttings
PanoramicW ideZoom
2D3DExit
Audio Settings
Audio Mode Flat
Balance 0
Lip Sync 0
TV Speakers Off
SRS StudioSound HD Standard
SRS TruVolume On
Advanced Audio
Equalizer Settings
Reset Audio Mode
-+
-+
providing deep, rich bass, and delivering crisp details 
and clear, intelligible dialog. Select Surround or Standard.
•  SRS TruVolume  - TruVolume
® intelligently normalizes 
volume fluctuations due to television commercials or 
channel changes. Select On or Off.
•  Advanced Audio - See 
Adjusting the Advanced Audio 
Settings
 on page 28.
•  Equalizer Settings - Adjust the boost or attenuation of 
different frequencies. Change the equalizer presets by 
selecting Flat, Rock, Pop, Classical or Jazz. To customize 
the equalizer settings yourself, set EQ Mode to Advanced, 
then adjust each frequency or set EQ Mode to Basic, 
then adjust Bass and Treble settings. (This setting is only 
available when SRS StudioSound HD is set to Standard.)
•  Reset Audio Mode - Restores the audio settings to the 
factory defaults. See 
Resetting the Audio Settings on 
page 28
.
4 .  When you have finished adjusting the audio settings, press 
the  EXiT button on the remote.  
						

							5
28
Adjusting the Advanced Audio Settings
To adjust the advanced audio settings:
1 .  From the Audio Settings Menu, 
use the Arrow buttons to 
highlight  Advanced Audio, 
then press OK. The Advanced 
Audio menu is displayed.
2 .  Use the Arrow buttons to 
highlight the setting you wish 
to adjust, then press Left/Right 
Arrow to change the setting:
• Digital Audio Out - 
Changes the type of 
processing for the Optical 
output when connected 
to a home theater audio 
system. Select Off, Dolby 
Digital, or PCM.
•  Analog Audio Out - Sets the 
volume control properties 
for the analog RCA (red/
white) connectors when 
connected to a home 
theater audio system. 
Select Variable to control 
the external speakers’ 
volume from the TV’s volume 
controls, or select Fixed 
to control the external 
speakers’ volume from 
your home theater system 
controls.
3 .  When you have finished adjusting the advanced audio 
settings, press the EXiT button on the remote.
Hel p
VIZIO
Netw ork
Sleep
Timer
Input CC
ABC
A udio
W ide
Normal
Pict ure
S e ttings
PanoramicW ideZoom
2D3DExit
Advanced Audio
Digital Audio Out PCM
Analog Audio Out Fixed
Resetting the Audio Settings
To reset the audio settings to the factory default settings:
1 . Press the MENU button on the remote. The on-screen menu is 
displayed.
2 .  Use the Arrow buttons on the remote to highlight the Audio  
icon and press OK. The Audio Settings menu is displayed.
3 .  Use the Arrow buttons to highlight Reset Audio Mode and 
press  OK. The TV displays, “Are you sure you want to RESET 
Audio Settings to the factory defaults?”
4 .  Highlight  Ye s and press OK.
5 .  Press the EXiT button on the remote.  
						

							5
29
uSiNg the NetwOrk cONNectiON MeNu
Your TV is internet-ready, featuring both an Ethernet port and 
built-in high-speed Wireless-N.
Connecting to a Wireless Network
To connect to a wireless network whose network name (SSID) is 
being broadcast:
If your TV is connected to a network with an 
Ethernet cable, you will not see the wireless network 
connection menu. You must disconnect the Ethernet 
cable to set up a wireless network connection.
1 . Press the MENU button on the 
remote. The on-screen menu is 
displayed.
2 .  Use the Arrow buttons on 
the remote to highlight the 
Network icon and press OK. 
The Network Connection menu 
is displayed.
3 .  If you do not see your wireless 
network displayed, highlight 
More Access Points and 
press  OK. The  Wireless Access 
Points menu, which is a list of 
available wireless networks, is 
displayed.
4 .  Highlight the name of your 
wireless network (this is the 
network’s SSID) and press OK.
5 .  Using the on-screen keyboard, 
enter your network’s password, 
then highlight Connect and 
press  OK.
6 .  Press the EXiT button on the remote. To connect to a wireless network whose network name (SSID) is 
not being broadcast:
1 . 
Press the MENU button on the 
remote. The on-screen menu is 
displayed.
2 .  Use the Arrow buttons on 
the remote to highlight the 
Network icon and press OK. 
The Network Connection menu 
is displayed.
3 .  Highlight  Enter Access Point 
Name and press OK.
4 .  Highlight  Show keyboard and 
press  OK to open the on-screen 
keyboard.
5 .  Using the on-screen keyboard, 
enter your network’s name 
(SSID), then highlight Connect  
and press OK.
6 .  Highlight  Show keyboard and 
press  OK to open the on-screen 
keyboard.
7 .  Using the on-screen keyboard, 
enter your network’s password, 
then highlight Connect and 
press  OK.
8 .  Press the EXiT button on the 
remote.
Hel p
VIZIO
Netw ork
Sleep
Timer
Input CC
ABC
A udio
W ide
Normal
Pict ure
S e ttings
PanoramicW ideZoom
2D3DExit
Enter Access Point Name
Please enter your Access point 
name. This is used for locating  
an Access Point with a hidden  
SSID
__
abcdefghi
jklmnopqr
stuvwxyz0
123456789
.@#.comSpace
Connect
Hel p
VIZIO
Netw ork
Sleep
Timer
Input CC
ABC
A udio
W ide
Normal
Pict ure
S e ttings
PanoramicW ideZoom
2D3DExit
Network connection
Wired Connection Disconnected
Wireless Access Points
Manual Setup
Enter Access Point Name
Test Connection
Advanced network settings  
						

							5
30
Changing the Advanced Network Settings
Advanced users can fine-tune the network settings using the 
Manual Setup feature.
To change advanced network settings:
1 .  From the Network Connection 
menu, highlight Manual Setup  
and press OK. The IP Settings 
menu is displayed.
2 .  Use the Arrow and OK buttons 
to adjust each setting:
• DHCP - (Dynamic Host 
Configuration  Protocol) This 
setting must be turned Off 
to change any of the other 
settings.
•  iP Address - The IP address 
assigned to the TV.
•  Subnet Mask - The subnet 
mask.
•  Default gateway  - Your 
network’s default gateway 
address.
•  Pref. DNS Server  - Your 
preferred domain name 
server address.
•  Alt DNS Server - Your alternate domain name server 
address.
3 .  If you need the RJ45 (Ethernet) MAC address or the Wireless 
MAC address to set up your network, these are displayed at 
the bottom of the IP Settings menu.
4 .  Press the EXiT button on the remote.
 
Hel p
VIZIO
Netw ork
Sleep
Timer
Input CC
ABC
A udio
W ide
Normal
Pict ure
S e ttings
PanoramicW ideZoom
2D3DExit
IP Setting
DHCP Off
IP Address          ____.____.____.____
Subnet Mask     ____.____.____.____
Default
Gateway           ____.____.____.____
Pref. DNS
Server                ____.____.____.____
Alt DNS
Server                ____.____.____.____
RJ45 MAC                       0:0:0:0:0:0
Wireless MAC          FF:FF:FF:FF:FF:FF
Testing Your Network Connection
To test your network connection:
1 .  From the Network Connection menu, highlight Test 
Connection and press OK.
2 .  The Test Connection screen displays the connection 
method, network name, signal strength, and download 
speed of your network connection.
3 .  Press the EXiT button on the remote.  
						

							5
31
chaNgiNg the tv  SettiNgS
Using the settings menu, you can:• Change the input source
•  Adjust the Tuner settings
•  Name the TV inputs
•  Set up parental controls
•  Change the on-screen 
menu language
•  Set the time
•  Adjust the Broadcast 
Interactivity setting
•  Adjust the CEC settings
•  Adjust the Power Indicator 
settings
Hel p
VIZIO
Netw ork
Sleep
Timer
Input CC
ABC
A udio
W ide
Normal
Pict ure
S e ttings
PanoramicW ideZoom
2D3DExit
Settings
Input Source TV
Tuner
Name Input
Parental Controls
Menu Language English
Time & Local Settings
Broadcast Interactivity               On
CEC Settings
Power Indicator On
Changing the input Source
To change the input source from the Settings menu:
1 . Press the MENU button on the remote. The on-screen menu is 
displayed.
2 .  Use the Arrow buttons on the remote to highlight the 
Settings icon and press OK. The Settings menu is displayed.
3 .  Highlight  input Source and press OK. The Input Source 
Selection menu is displayed.
4 .  Highlight the input source you want to display and press OK.
To quickly access the Input Source menu, press the 
iNPUT button on the remote.  
						

							5
32
Setting the Tuner Mode
If you are using a device that is connected to the RF input, such 
as an external antenna or cable TV connection, you must set the 
tuner mode.
1 .  Press the MENU button on the remote. The on-screen menu is 
displayed.
2 .  Use the Arrow buttons on the remote to highlight the 
Settings icon and press OK. The Settings menu is displayed.
3 .  Highlight  Tuner and press OK. The Tuner Settings menu is 
displayed.
4 .  Highlight  Tuner Mode, then use the Left/ Right Arrow buttons 
to select Antenna or Cable.
5 .  Press the EXiT button on the remote. Scanning for Channels
Before the TV can detect and display channels and their 
associated information, you must scan for channels. A channel 
scan may also be necessary when the TV has been moved to an 
area where different free-to-air broadcast television channels are 
available.
1 . 
From the Tuner Settings menu, 
highlight  Auto Channel Scan. 
The auto channel scan begins.
2 .  Wait until the channel scan is 
100% complete. Highlight Done  
and press OK.
3 .  Press the EXiT button on the 
remote.
Hel p
VIZIO
Netw ork
Sleep
Timer
Input CC
ABC
A udio
W ide
Normal
Pict ure
S e ttings
PanoramicW ideZoom
2D3DExit
Channel Scan
Channel Scan
Digital Channels:        0
Analog Channels:      19
18% Complete Cancel
Press OK to finish  
						

							5
33
Adding New Channels
Occasionally, you may need to add a new analog channel or 
add a new range of channels. You can do this by using the Partial 
Channel Search and Add Analog Channel options.
To add a range of new channels:
1 . From the Tuner Settings menu, highlight Partial Channel 
Search  and press OK. The Partial Channel Search menu is 
displayed.
2 .  Highlight  Scan Mode and select the type of channel you 
are adding: Analog/Digital, Analog, or Digital.
3 .  Highlight  From Channel and enter the channel from which 
you want to begin the scan. (Use the Number Pad on the 
remote to enter the channel.)
4 .  Highlight  To Channel and enter the channel to which you 
want to end the scan. (Use the Number Pad on the remote 
to enter the channel.)
5 .  Highlight  Start and press OK. The partial channel search 
begins.
6 .  Wait until the partial channel search is 100% complete. 
Highlight  Done and press OK.
7 .  Press the EXiT button on the remote. To add a single new analog channel:
1 . 
From the Tuner Settings menu, 
highlight  Add Analog Channel 
and press OK. The  Add Analog 
Channel menu is displayed.
2 .  Highlight  Enter Channel # and 
use the Number Pad on the 
remote to enter the number of 
the channel you are adding.
3 .  Highlight  Add Channel and 
press  OK. The TV scans for the 
channel. 
4 .  When the TV is done scanning 
for the channel, press the EXiT  
button on the remote.
Hel p
VIZIO
Netw ork
Sleep
Timer
Input CC
ABC
A udio
W ide
Normal
Pict ure
S e ttings
PanoramicW ideZoom
2D3DExit
Add Analog Channel
Enter Channel # __
Add Channel  
						

							5
34
Skipping Channels
After a channel scan is completed, you may find that some 
channels are too weak to watch comfortably. There may also be 
some channels you do not want to view. You can remove these 
channels from the TV’s memory with the Skip Channel feature.
Channels that have been removed with the Skip 
Channel feature can still be viewed if the channel 
is entered using the Number Pad. If you wish to 
completely block a channel from being viewed, use 
the parental controls. See 
 on page 35.
To remove a channel:
1 . From the Tuner Settings menu, 
highlight  Skip Channel and 
press OK. The Skip Channel 
menu is displayed.
2 .  For each channel you wish 
to remove, use the Up/Down 
Arrow buttons on the remote 
to highlight the channel and 
press  OK. An X appears to the 
right of each channel you 
select.
3 .  When you have selected all 
of the channels you wish to 
remove, press the EXiT button 
on the remote.
Hel p
VIZIO
Netw ork
Sleep
Timer
Input CC
ABC
A udio
W ide
Normal
Pict ure
S e ttings
PanoramicW ideZoom
2D3DExit
Skip Channel
0Test 0 x
0-1Test 1x
0-1Test 2x
0Test 3x
0-2Test 4x
0-3Test 5x
Changing the Audio Language
Some digital free-to-air and cable channels broadcast programs 
in more than one language. The TV’s MTS  (Multichannel Television 
Sound) feature allows you to listen to audio in your preferred 
language.
Not all programs are broadcast in multiple languages. 
The MTS feature only works when the program being 
viewed is being broadcast in the language you 
select.
To use the Analog MTS feature:
1 .  From the Tuner Settings menu, 
highlight  Analog MTS and 
press  OK. The Analog  MTS 
menu is displayed.
2 .  Select  Mono,  Stereo, o r  
SAP (secondary audio 
programming). Press OK.
3 .  Press the EXiT button on the 
remote.
Hel p
VIZIO
Netw ork
Sleep
Timer
Input CC
ABC
A udio
W ide
Normal
Pict ure
S e ttings
PanoramicW ideZoom
2D3DExit
Analog MTS
Mono
Stereo SAP